A Chair From a 2 x 6
-
I know what you mean.
-
Nice job Dave Maybe the bones of an idea for a competition there! What can be done with ?? of ?? x ??
-
I can see how the wing parts might be splined or dowelled to the main sections. Would that be just an interlocking notch (maybe mortise) joint for the two mains?
-
Thanks, Mike.
Those sorts of competitions come up every once in awhile on the woodworking forums. It is simply amazing what some folks manage to tease out of a single board. The problem around here is that construction lumber is usually so lousy, much of a board would be waste.
Tim, the wings are indeed attached with dowels and the two main pieces are connected with a "halving joint", the same notch cut in both pieces. I think that joint would be left unglued so the chair can be knocked down for storage.
-
Then I would "gild the lily" with some Stanley hardware at that joint, in case Csaba comes over.
-
This idea uses just under 10' of 6x2" to make a 'stool' for Csaba !
Glued and screwed together it'd be pretty indestructible...
-
Those are nice, Dave. I would say the design should be for a portable, two or three piece assembly. Where's the video?
-
TIG, that still might be a bit lightly built for Csaba.
Brooke, I agree with you. I wouldn't use any hardware to join the seat and backrest.
-
Used to do Medieval recreation for fun, these chairs were popular. The 2 x 12 chair variant was very similar, and quite portable. Here's an example:
-
Jeff, I like yours much better.
-
@escapeartist said:
Used to do Medieval recreation for fun, these chairs were popular. The 2 x 12 chair variant was very similar, and quite portable. Here's an example:
Simple model of the picture. Not exactly accurate but it is made from 1 2x12x8 board
-
Thanks for the model, Jon. Why not post a pic?
-
honestly, because I don't know how
-
I don't know what I'm doing wrong... -
-
Indeed that was easy... I was trying to link to Flickr and the image wasn't loading correctly. Thanks
-
The image saves lazy guys from DL'ing a model without seeing it. Yours looks nice; maybe a little thin in the scroll back rest members? You've got the important to me interlock for breakdown / portability that the master's original post lacked. Perhaps we'll hear from him.
-
@brookefox said:
You've got the important to me interlock for breakdown / portability that the master's original post lacked. Perhaps we'll hear from him.
Are you referring to me as "the master"? Surely you jest. If you are, then, whatchoo talkin' 'bout, Willis?
Mine has that interlock you are so infatuated with.
-
@brookefox said:
The image saves lazy guys from DL'ing a model without seeing it. Yours looks nice; maybe a little thin in the scroll back rest members? You've got the important to me interlock for breakdown / portability that the master's original post lacked. Perhaps we'll hear from him.
Yea, you're probably correct. It is only 1" as drawn.
-
Ah, there it is, probably from one of his lackeys. Still, thanks be to him. That kind of side interlock, though, might be subject to more twist/torque wear. I dunno, ain't got sperienze wot u gize got.
Advertisement