[Plugin] 1001bit Tools - Architectural tools for SketchUp
-
Hi Goh! I'm a SketchUcation n00b and I just discovered your toolset. AMAZING!!!
I have one question though, I'm trying create louvers for a curved surface (since my building is curved and I'm putting the louvers on its south-facing wall). Right now I'm playing around with "View Hidden Geometry" and then generating the louvers on a per-surface basis, but it's taking me quite some time and doesn't look very clean. Is there any way to generate the louvers (both horizontal and vertical) from a curved surface?
-
hi,
I'm afraid there is currently no single function to generate louvres on a curved surface. What i would do, would be to use combination of 'extrude along sloping path' and 'linear array'
Step 1: select the path (can be different edges, but has to be connected)
Step 2: create a face on x y plane to define the profile of the louvre.
Step 3: use the 'extrude along sloping path tool'
Step 4: select the created louvre then use the 'linear array' tool to create multiple louvres
cheers!
-
hi everyone,
Haven't been doing much programming for the past few months... my day job has been getting quite crazy lately.
Anyway, I managed to work on the Panel Divide tool.
Previous version has issues of either conflict or simply unstable.
I have re-written the tool, and was hoping that this version works better
(this is a patch for the Pro version by the way. Once i'm sure that this is ok, i will write another for the standard version.)
Just replace the paneldivide.rbs file in your 1001bit_pro folder with this one.
Thanks and cheers!
Goh
-
Sir
How do I tell what version of your software I am using. The latest version is 1.1.7 however as you can see, that is not what the info screen shows.
Ken
-
Ooops
I have not been updating that version information!!!
(just uploaded the corrected zip file);
the info should show version 1.2 if your installed with the latest zip file (from the above link)Sorry for the confusion
GohCH -
@unknownuser said:
Ooops
I have not been updating that version information!!!
(just uploaded the corrected zip file);
the info should show version 1.2 if your installed with the latest zip file (from the above link)Sorry for the confusion
GohCHOK, I have tried to download Version 1.2. And again, I have now 30 day trial version has expired. And when I send in for another authorization number, I get that two authorization numbers have already been issued for this computer. Dam right, apparently I need a new number every time you upgrade the software. YOU HAVE THE LEAST UNDERSTANDABLE UPGRADE PROCEDURE THAT I HAVE EVER DEALT WITH.
So, one can not determine which version he has on his computer, because you don't keep track of the upgrades in the license info box, and when I do upgrade I have to go thought hoops to just get the software running again.
Dam, you have good software, just figure out how to do better with your license number. I went thought this not to long ago when I upgraded from Vista to Windows 7.
Pissed I am, Ken
It shouldn't be this hard to do an upgrade.
-
hi Ken,
My apology for this. I was trying to make the loading faster to by pass the command windows and there seems to be a bug there!
There's an incompatibility with some of the activation keys issued last year which i have just realised.
Sorry everyone, I am taking 1001bit Pro version 1.2 off for fixing for a few days.
will put it up for download when fix that bug.
Again Ken, really sorry about the inconvenience!Goh
-
hi everyone,
Here's the patch for panel divider tool for
1001bit standard version:
paneldivide.rbs for 1001bit standardand for 1001bit Pro
paneldivide.rbs for 1001bit PRO
(previous one has some bugs; please replace with this one)on second thought, i recompiled all these into 1001bit Pro (v1.2); which also included the patch to
prevent the black command windows during loading and also speed up loading.
please download and try out from:
%(#FF0000)[Hi everyone, there's a bug on 1001bit Pro version 1.2 with activation keys issued in 2010!
I have taken the upgrade off for a few days to fix the bug.
Sorry for the inconvenience!]
comments, as usual, are always welcome!cheers!
GohCH -
@unknownuser said:
hi Ken,
My apology for this. I was trying to make the loading faster to by pass the command windows and there seems to be a bug there!
There's an incompatibility with some of the activation keys issued last year which i have just realised.
Sorry everyone, I am taking 1001bit Pro version 1.2 off for fixing for a few days.
will put it up for download when fix that bug.
Again Ken, really sorry about the inconvenience!Goh
Sir
Mr Hee let me apologize for my bad forum behavior. Guess I should have waited before sending the above note. To all forum members, Mr. Hee has sent me a new authorization code that works and has alway in the past responded quickly and in a helpful manner. Sir there was very little inconvenience, just frustrations in trying to keep a desktop and laptop in sync.
Again, let me thank you for you very useful plugins and your continued assistance.
Ken
-
Hi Ken,
Thanks and please do not apologize for anything.
I am really grateful that you raised a very important bug, as well as reminding me the importance of clarity and ease of use.
If not for your comments, there will be a lot more people having problem with the bug right now.
and, for every feedback on issues, there are always a lot more people who are frustrated with similar issues.Thanks again, and thanks for sending me your old key for debugging.
I'll try to debug this so that we can get rid of the command window that seems to slow down the loading.Cheers!
Goh C H -
hi everyone,
I've just uploaded the debugged 1001bit Pro (version 1.2) for download.
http://www.1001bit.com/pro/download/1001bit_pro(v1.2).zipThe update contains the following:
- panel divide tool (re-written, should work better)
- startup loading; loads faster and should not show the black command dialog,
and also got rid of the request code.
Please try out
cheers!
Goh -
@unknownuser said:
hi everyone,
I've just uploaded the debugged 1001bit Pro (version 1.2) for download.
http://www.1001bit.com/pro/download/1001bit_pro(v1.2).zipThe update contains the following:
- panel divide tool (re-written, should work better)
- startup loading; loads faster and should not show the black command dialog,
and also got rid of the request code.
Please try out
cheers!
GohCheers! I'll give it a whirl. I've come to the habit of having 1001bit disabled by default and only load on demand due to the load performance and flashing command windows. Now I might keep it enabled.
-
Thanks Goh, great stuff!!
-
hi everyone,
1001bit Pro Czech language pack is now available!http://www.1001bit.com/discussions/viewtopic.php?f=17&t=1131
Special thanks to Marek Raab for his hardwork and sharing!
(And he even translated the images!) -
1001bit Pro version 2 is out. http://www.1001bit.com/pro/pro2_improvements.html
-
@esteromx said:
1001bit Pro version 2 is out. http://www.1001bit.com/pro/pro2_improvements.html
Nice! -
bought... and installing pronto.
awesome awesome awesome...Edges to 3D profiles
Extrude to target plane
Extrude along sloping curved path
Best fit facewhat an incredible tool kit this has become... well it always has been. how can you top yourself, when you keep setting expectations so high.
instant tube frame or roll cage... just a few clicks and bang. and it lines up great. do you realize how much time I spent building the roll cage for my Nascar?
-
One 'tip' for v1 pro users who are upgrading to v2 pro...
If you install v2 files overwriting the v1 files, then Sketchup might no longer auto-load 1001tools at all, as there will be some initial error messages [re. incorrect key etc].
You cannot therefore enter your new key-code into a dialog as your upgrade email has instructed. Bummer !
However, if you look in the 1001tool's subfolder there's a file called 1001bit_pro.key... open that using Notepad or similar plain-text editor like Notepad++... edit>copy your new key string from you confirmation email [all 458 characters of it!] and then in the .key file edit use edit>select-all and then edit>paste to overwrite the old key string. Save the .key file and restart Sketchup, now 1001tools v2 pro should auto-load successfully with all of the new/improved features... Fixed !!
-
TIG: Did you report this upgrade problem?
-
@thomthom said:
TIG: Did you report this upgrade problem?
Just about to...
EDIT: It's now reported to 1001 direct.
Advertisement