[Plugin] extrudeEdgesByLathe

TIG

@ben ritter said:

TIG,

That is the process I used, however, without having a short line to define the radius point.

In my attachment, you can see the result with and without a reference line for the radius point. The inference was indicating that I was going up in the blue axis direction, but I still got the result shown.

Thanks. Ben

Did the VCB say [0.0,0.0,1.0] - i.e. Z-axis... If you start off in the blue Z-direction and hold down the shift-key the interference is locked to blue and when you pick it should definitely be axial... You don't need the short line - I added it for clarity. You can start to move off in the blue direction, hold-down shift to lock in the blue and pick any point above the center and it should snap to vertical ?

Ben Ritter

The VCB doesn't say anything in the process, but the screen shows that I'm on the blue axis. For some reason, it only works when I lock down the inferencing with the shift key. Even though it says I'm pointing on the blue axis, somehow it must not lock on without holding the shift.

Thanks TIG

Jim

TIG - thanks for another fine plugin.

report - not sure where you're getting the definition for round - Float.round does not take an argument.

Also, version 7 users would find a nice speed-up by modifying the start_operation statement:

model.start_operation("Lathe", true)


Error; #<ArgumentError; wrong number of arguments(1 for 0)>
C;/Program Files/Google/Google SketchUp 7.1b3/Plugins/lathe1.1.rb;146;in `round'
C;/Program Files/Google/Google SketchUp 7.1b3/Plugins/lathe1.1.rb;146;in `onMouseMove'
C;/Program Files/Google/Google SketchUp 7.1b3/Plugins/lathe1.1.rb;146

simon le bon

HeyHey!

this time (V1.1) Lathe Tool is "carrément génial"

++simon

tomasz

Tig, thanks for the plugin!

TIG

v1.2 now available here http://forums.sketchucation.com/viewtopic.php?p=184477#p184477
'Round' error fixed.
Operation optimized for v7 users.
Following Jim's comments...

TIG

@jim said:

TIG - thanks for another fine plugin.
report - not sure where you're getting the definition for round - Float.round does not take an argument.
Also, version 7 users would find a nice speed-up by modifying the start_operation statement:
model.start_operation("Lathe", true)


> Error; #<ArgumentError; wrong number of arguments(1 for 0)>
> C;/Program Files/Google/Google SketchUp 7.1b3/Plugins/lathe1.1.rb;146;in `round'
> C;/Program Files/Google/Google SketchUp 7.1b3/Plugins/lathe1.1.rb;146;in `onMouseMove'
> C;/Program Files/Google/Google SketchUp 7.1b3/Plugins/lathe1.1.rb;146
>

I'll add the version 7 speed up [forgotten during its speedy initial creation] and my float.round(n) does work for me !!! - although I don't know where I'm got that from [Edit: I grepped my rubies and found that 'Demeter.rb' and 'sunposition.rb' both redefine float.round(n=0) to take an argument [defaults to 0 if not set]]... I've written a similar method too float.roundup(n) to keep it separate... An update v1.2 will be issued shortly...

RustyShack

Very nice to have this function as a pseudo-built in rather than the clunky workaround previously required to make lathed objects. Thanks!

MALAISE

Wow ! Many thanks TIG.
SU becomes really powerfull when boosted with all theses plugins...

MALAISE

TIG

Here's v1.3 with Soft/Smooth Option in dialog
http://forums.sketchucation.com/viewtopic.php?p=184477#p184477

dedmin

simon le bon

Lathe V1.3 *** more and more a true complement to FollowMe. I love this tool.

Unsoften ./. Soften ./. Soften+Smooth

TIG,

simon

TIG

v1.4 now available - fixed inference-locking glitch on repeated lathes...

http://forums.sketchucation.com/viewtopic.php?p=184477#p184477

DIEGO-RODRIGUEZ

HI TIG, is a small BUG.

THANKS FOR THE PLUGINS

Dan

@tig said:

Version:
20090915 1.0 First issue
20090916 1.1 Pick cursor/inferencing improved, choose 'axis' added.
20090917 1.2 'Round' error fixed. Operation optimized for v7 users.
20090918 1.3 Soft/Smooth Edges option added.
20090919 1.4 Inference-locking glitch fixed on repeated lathes.

Tig, I'm tired trying to follow your daily updates... so I'll be waiting for a week to jump directly to "Lathe V 3.0"

Just kidding!
Awesome work, thank you again!

xrok1

very nice!

TIG

v1.5 available here http://forums.sketchucation.com/viewtopic.php?p=184477#p184477
Smooth bug with Reverse Faces fixed.

cyan.archnet

SUPERB Plugin indeed!, THANKS A LOT!

jwlyon1

ZOMG
This is fantastic!!
TIG, your plugins are amazing.

Added to my work flow and saved so much time!

Ruturaj

This tool are very nice tool

Good Job

Thanks

please sketchup " boolean " rb or plugin