[Plugin] SliceModeler v1.3 released!

asteronimo

Can you send me the drawing you are using?
And are you sure you are using the right version?
Because there should be default values and the flattened slices should spread out nicely.
See the picture on the url in the first post of this thread.

What SU version do you use, and wat is your OS?
I tested in SU 6 Pro on Mac OSX.

Dave R

I can see a possible woodworker's application for this. It could be useful for creating templates for molds for laminating veneers to make complex shapes. Especially if they are compound curves. The illustration isn't a compund curve of course but gives the idea.

It would be nice if the plugin would give a thickness to the slices so that both sides of each part of the mold would be recognizable but that's alright.

jumpjack

Sorry, my fault: after first slicing, when I saw the new dialog I thought it was the same of the first one shown again, so I canceled it.....
I didn't understand it was a multiple-stages input!
Maybe all inputs should be inserted by user into a single dialog at the beginning? (but this would require checkboxes into dialog, and I don't know if they are supported).

Thanks.

Dave R

Yes, I have the latest version but I can't seem to figure out how to generate just the mold shapes as I show in the image above. Perhaps you could demonstrate?

mold.skp

jumpjack

Ok, now it's working for me.
But I can't figure out how to get slices as thick as their distance: using same number as input does not work, I always can see some empty space between slices.

TIG

@dave r said:

Yes, I have the latest version but I can't seem to figure out how to generate just the mold shapes as I show in the image above. Perhaps you could demonstrate?

[attachment=0:1fadgjsa]mold.skp[/attachment:1fadgjsa]

SlicModeler makes slices on two chosen axes and puts slots into them so when you make the physical pieces they'll slot together into a 3D shape...
I think that my original "Slicer" does more what you want... select the item and run Slicer - set the spacing at 1" and slice at 3/4" (1/4" gap), for your example you'd use Y axis. Don't adjust the spacing and finally say that you want flattened slices... You should then get what you want...

.

Dave R

Thanks TIG.

You are indeed correct as you always are. Very good.

Dave

cpeep

Thanks for posting on my blog about this. I had toyed with the idea of using Sketchup for sliceforms, but didn't realize you could write a plugin to slice up ANY shape. Fabulous!! I'm going to play around with it a bit. Stay tuned.

Carol
Extreme Cards and Papercrafting
http://extremecards.blogspot.com

asteronimo

Dave R,

Go back to my first post in this thread and get the script there.
The latest version gives thickness to the slices.

cpeep

I've had the opportunity to play around with this plugin a little. It works quite well, but I found that very often I want my center slice to cut through the center point of the model, thus creating two slices that intersect along the center line of each other. (The plugin creates four intersecting slices at the center of the model, equidistant from the center).

Maybe I missed a way to shift the slices along the model?

Carol
Extreme Cards and Papercrafting

paolo99

asteronimo - Is there any support for the new version. I've got a bit of a problem...

Just in case anyone can help -

I'm trying to slice an object made up of two different pieces - they are grouped so they do look like one. The object is a available to form the the Sketchup 3d Warehouse. It's a mushroom - "Mushroom Pilz' by moom.

The problem is that the slicer always seems to see the model as two separate entities - which, technically speaking it is. Is there a way to join faces in Sketchup?

If someone with more of an understanding of what's going on can get this to work properly, can you let me know.

Cheers

Paolo

p.s. It doesn't always ask if I want to output the flat images. This plugin clearly needs work if it's not a freebie!! WASTE OF TIME

xrok1

very nice. i've had this for a while but never tried it out till now. its very cool.

i do however have a file that it won't complete on, instead of discribing the problem i'll just post the file. could you please take a look at it to verify?

horse.skp