Posts made by majid866

Dear friends,
The new version of the “MAJ Wall” extension is published and you can download it from the following address for free.
https://sketchucation.com/plugin/2378-maj_wall
Select point is more simple and fast in the new version. For more information watch the following video.
https://youtu.be/bU7O09xvRPU

@majid866 said:

Dear Friends,

3 new rail added to MAJ Rail. You can see details in the following video. Please contact me (partban@gmail.com) if you wish to have your own rail.

https://www.youtube.com/watch?v=VVakFRvqJgU

New rail type added.

---

With this extension, you can draw Flor, Baseboard, Interior Wall, Cornice, and Knauf with one click!!!
Also, you can set the size and material of these 5 items. Please watch the following video for more information.

https://youtu.be/pVbLoXMCEBM

Dear Friends,

3 new rail added to MAJ Rail. You can see details in the following video. Please contact me (partban@gmail.com) if you wish to have your own rail.

https://www.youtube.com/watch?v=VVakFRvqJgU

---

Hello Guys,
MAJ Stair Version 1.0.1 can make any kind of steps in 4 different thickness types. In the new version, you can control steps nose exist or not. Also, during drawing, you can control draw steps from bottom to top or from top to bottom. In the new version, you can complex stairs. Please watch the following video for more information. Please let me know your idea about this extension and let me know if you have any suggestions.
You can download the new version at the following address.
https://sketchucation.com/plugin/2380-maj_stair

https://www.youtube.com/watch?v=cdcIbW3fy1Q

@dan rathbun said:

Plugin / Extension announcements belong in the "Plugins" subforum.

You'll need to get admins to move all these announcements.

Hi, How can I delete my messages?

@1367 said:

@majid866 said:

دوستان لیست پلاگینهای منتشر شده در زیر آمده است.

https://sketchucation.com/pluginstore?pln=MAJ_Beam
https://sketchucation.com/pluginstore?pln=MAJ_Column
https://sketchucation.com/pluginstore?pln=MAJ_Door_Window_Cutter
https://sketchucation.com/pluginstore?pln=MAJ_Rail
https://sketchucation.com/pluginstore?pln=MAJ_Stair
https://sketchucation.com/pluginstore?pln=MAJ_Wall

چقدر عالیه این پلاگین. اینکه میشه سطح فینیشینگ رو به دیوار اضافه کرد فوق العاده س

ممنون از توجه شما. بسیاری از دوستان به اینکه میشود لایه فینیشینگ و یا اینتریور را میشود جداگانه اضافه کرد دقت نمیکنند.

Hello friends,

"MAJ FollowMe" can select a shape from a list. The shape will follow your mouse pointer in Sketchup. In any place, you click you will have a fixpoint, and a double click will make your 3D. You can add a shape to the list (and save it on the hard disk) from Sketchup group, component, or single face simply.
You can download this extension from the following address.
https://sketchucation.com/plugin/2415-maj_followme
YouTube:
https://www.youtube.com/watch?v=UCsfosbu97Q

Please let me know your idea about this extension.

Best regards,

@majid said:

بله. این پلاگین قدیمی هم خوبه. اما پلاگین فراری، امکانات مخصوص سازه های غشایی رو داشت. مثلا میشد تعریف کنی که یک لبه (بخش فشاری پیرامونی اون سازه) ، آیا به پوسته غشایی بچسبه یا نه و به این ترتیب خودش قوس حاصل مابین پوسته غشایی و میله های پیرامونشو حساب میکرد. یعنی مخصوص سازه غشایی بود.

پلاگینها بسیاری در این مورد طراحی شده که بسیار جالب هسنتد.
Curviloft یکی دیگر از این نرم افزارها است.

@majid said:

جناب مهندس. یه پلاگینیخوبی فراری آرکیتکتس داده بود واسه سازه های پارجه ایغشایی. متاسفانه سه سال هست که دیگه دولوپ نشده.
https://www.sergeferrari.com/applications/tensile-roofs
الان دیگه اون صفحه که پلاگین توش بود هم نیستش. من میتونم
https://sketchucation.com/forums/download/file.php?id=106901&mode=view/rokbox.jpg
لینک دانلود نسخه قبلی
https://sketchucation.com/forums/download/file.php?id=163000
https://sketchucation.com/forums/download/file.php?id=163008

درود بر شما
اگر اشتباه نکنم برنامه زیر میتواند همان کار را بخوبی انجام بدهد.
Soap Skin & Bubble
لطفا نظر خودتان را در خصوص این برنامه بفرمایید.
https://www.youtube.com/watch?v=AXHPwbg_lDI

In the following video, we draw a complete building with many details by using only MAJ extensions. All rails, stairs, doors, windows, knaufs, cornices, baseboards, wallpapers, floors, columns, beams, rebars, and … are made by MAJ Extensions.
https://www.youtube.com/watch?v=7cJQ5ujMK9M

Hi,

Two types of doors are added to the new version (V1.0.2). These types are the front door and will be matched to Finishing Tag. These types only ope from the indoor side. You can watch its video from the following address.
https://www.youtube.com/watch?v=-K5LFfu3JO4
You can download it from the following address.
https://sketchucation.com/plugin/2402-maj_door

Best regards

@pbacot said:

Great ruby work. The temporary wall transparency while working is a wonderful idea!

Thank you so much. Also, this plugin has good potential to add more door types. I plan to add a front door that will be matched to finishing layer.

Hi,
"MAJ Door" can simply make doors in the walls made by "MAJ Wall Maker" extensions. For more information please watch the following video.
https://youtu.be/aG9zcRCo7Xo
You can download this extension from the following address.
https://sketchucation.com/plugin/2402-maj_door

---

---

---

---

---

@pbacot said:

Thank you!

May I suggest a protocol: To be able to set a default to the TOP of the window. It is more common that the tops of windows will be the same height. Then one can complete windows in a building without adjusting the setting.

I would also suggest for the size: keyboard input or tool continues to put the size of the last window that you used. Because simply clicking is inaccurate and because you often insert identical windows

I agree with you that windows should be at the same height but also I will have MAJ Door extension and for doors size from the bottom of the wall is important. I wish to have the same standard for both extensions.

Your other suggestion will have some advantages and some disadvantages. Also, it is possible to have one more click and select the height of the window. Also, I wish to keep the simplicity of extensions. Let me think more about it. I hope to hear more suggestions.

Hello everyone,
“MAJ Window” extension can cut walls made by “MAJ Wall Maker” extension also can make a window match to the wall.
Walls should be made by “MAJ Wall Maker” extension and original layers name. In the first Sketchup window select “Window Height”, “Window to WZ” and “Window Type”. “Window to WZ” is the distance between the bottom of the wall to the bottom of the window. First, click on the wall cause “Finishing Layer (Tag)” and “Interior Layer” hide. You can quit this step by clicking on “Wall” directly. Second click cause “Wall Layer” will be transparent. In this way, you can see the 2D plan or other elements covered by the wall. You can select the first side of the window with a third click. The fourth click will select another side of the window. After the fourth click, 3 wall layers cut and window match to the wall will make.
"MAJ Window" extension is published in EWH.
Please let me know your idea about this extension.

---

---

@majid said:

عالی مهندس جان
الان داره اینجوری اسکچاپ، واسه خیلیا جالبتر میشه...
مث رویت میشه آروم آروم دسته بندیهای مختلف اجزا ایجاد کرد، درسته؟

من برای ساختمان هیچ ایده جدیدی ندارم. البته 2 پلاگین خودم را منتشر نکردم.

دوستان لیست پلاگینهای منتشر شده در زیر آمده است.

https://sketchucation.com/pluginstore?pln=MAJ_Beam
https://sketchucation.com/pluginstore?pln=MAJ_Column
https://sketchucation.com/pluginstore?pln=MAJ_Door_Window_Cutter
https://sketchucation.com/pluginstore?pln=MAJ_Rail
https://sketchucation.com/pluginstore?pln=MAJ_Stair
https://sketchucation.com/pluginstore?pln=MAJ_Wall

@box said:

From memory, and I may be wrong as it has been many years, but it is possible that you may not be able to send a private message until you have a few more posts.
If you don't see this icon you'll need to make a few comments to get it working.

Hello Gábor
I sent you several PM but unfortunately, you never answer them. I wish you will be healthy.

Best regards,

Majid Mahmoudi

Dear friends,

MAJ Rail Version 0.0.2 is published. Please let me know your idea about it.