fredo6 licences

[filoufil]

Hi, I'd like to reset my plugin licences because I'm having problems using them on 2 different computers.
I think there are some old installations on an old PC... and this is blocking the number of licences. ?

What should I do?

Fredo6 Plugins Information on 2025-01-09 15:36:18 +0100

• Platform: x64-mswin64_140 - Ruby: 3.2.2
• Sketchup: 24.0.594
• LibFredo6: v15.0a
• LibFredo6 Binary loaded
• Sketchucation ExtensionStore: 4.4.1
• SCFLicense: v6.4a - 74
• Fredo6 Plugins

  Curviloft v2.0a - licensed FULL
  FredoScale v3.6a
  FredoTools v4.5c
  JointPushPull v4.8a - licensed FULL
  RoundCorner v3.4a - licensed FULL
  ToolsOnSurface v2.6a
  TopoShaper v2.7a

• SCFLicense directory present

  Signature File: 2023-04-12 20:07:26 +0200
  Curviloft: 2023-09-25 08:39:17 +0200
  JointPushPull: 2024-09-18 11:24:27 +0200
  RoundCorner: 2023-09-25 08:40:05 +0200

Merci

[Rich O Brien]

Email support@sketchucation.com and we can walk you through it

[fjsgruppe]

Hi,

I am on a win 10 workstation with 2 Monitors.
Hope I use the right place to ask for help:

Every time I start Sketchup there is trouble with Fredos plugins:
It starts with showing this message:

Script Animator is loaded but menus will show up only at next startup of
Sketchup

SU continues showing the same message for :

Curviloft, Curvizard, FredoGuides, FredoPortrait, FredoScale,
FredoSketch, Fredo Spline, FredoTools, HoverSelect,
JointPushPull, Layport, MatSim, MoveAlignMe, Mr.Hide,
RoundCorner, ThruPaint, ToolsOnSurface, TopoShaper, VisuHole,
Axyz (21 klicks).

then, in the lower right corner it shows:

Lord Of The Toolbars
Some extensions are referenced in palettes but not loaded
C:/Users/fjSchüssler/AppData/Roaming/Sketchllp/Sketchll
p 2024/SketchUp/Plugins/Fredo6
_Souvenir/IMAGES_Standard/SouvenirJcon_History_Last
[1]
c:/users/fjschüssler/appdata/roaming/sketchup/sketchup

Kann mir jemand helfen?
Y a t il personne qui peut m'aider?

Beste Grüße nach Frankreich
Regards
fjs

[Rich O Brien]

Please run the Window > Libfredo Settings > Fredo6 Plugins Information for Sketchucation Support menu command in SketchUp and copy/paste the output into your reply.

[TIG]

@fjsgruppe said in fredo6 licences:

As well as doing what Rich asks, please confirm you have the latest versions of LibFredo6 [for vital helper files and our SketchUcation toolset installed [for the licensing].
And your Windows user-name doesn't follow Windows guidance as it contains an umlaut...
C:/Users/fjSchüssler
If all else fails try changing your user-name to fjSchussler or fjSchuessler ?

[fjsgruppe]

Hi,
I hope I could solve the biggest Problem.
The mind.sight.studios plugin DoubleCut had some problems validating my license. I wrote Dale, and we solved the problem.
Since then - i wonder why - there ist just one problem left with fredo6 left: LordOfTheToolbars.
The rest is OK I tested it 3 times!
This is the requested information:

Fredo6 Plugins Information on 2025-01-14 15:36:34 +0100

• Platform: x64-mswin64_140 - Ruby: 3.2.2
• Sketchup: 24.0.594
• LibFredo6: v15.0a
• LibFredo6 Binary loaded
• Sketchucation ExtensionStore: 4.4.1
• SCFLicense: v6.4a - 74
• Fredo6 Plugins

  LordOfTheToolbars v2.9c
  Animator v4.1a
  Curviloft v2.0a - licensed FULL
  Curvizard v2.5a - licensed FULL
  FredoGuides v2.7a
  FredoPortrait v2.9a
  FredoScale v3.6a - licensed FULL
  FredoSketch v1.5a
  FredoSpline v2.6a
  FredoTools v4.5c
  HoverSelect v1.5a
  JointPushPull v4.8a - licensed FULL
  Layport v1.2a
  MatSim v1.4a
  MoveAlignMe v1.4a
  MrHide v1.8a
  RoundCorner v3.4a - licensed FULL
  ThruPaint v2.8b - licensed FULL
  ToolsOnSurface v2.6a - licensed FULL
  TopoShaper v2.7a - licensed FULL
  VisuHole v1.5a - licensed FULL
  Axyz v1.0a

• SCFLicense directory present

  Signature File: 2022-05-14 16:28:40 +0200
  Curviloft: 2023-08-20 17:08:32 +0200
  Curvizard: 2023-08-20 17:06:54 +0200
  FredoScale: 2023-08-20 17:08:06 +0200
  JointPushPull: 2023-08-20 17:09:24 +0200
  PieBeta: 2022-05-15 12:45:17 +0200
  RoundCorner: 2023-08-20 17:10:03 +0200
  ThruPaint: 2024-06-05 13:36:52 +0200
  ToolsOnSurface: 2023-08-20 17:01:15 +0200
  TopoShaper: 2023-08-20 17:07:32 +0200
  VisuHole: 2023-08-20 17:06:03 +0200
  re
  fjs

[TIG]

Try the user-name solution I mentioned...
PS: does the computer's name contain any non ASCII characters ?

[Rich O Brien]

@fjsgruppe said in fredo6 licences:

c:/users/fjschüssler/appdata/roaming/sketchup/sketchup

Can you rename your device to not use special characters?

[fjsgruppe]

Hi TIG,
Hi Rich,
my computer is on the company network and I'm afraid of doing something wrong - I have no idea about networks and I'll better ask our network specialist.
I will probably be able to change the name of the local PC.

Schöne Grüße aus Deutschland
Franz-Josef

[TIG]

@fjsgruppe
There are two possible places that might be tripping things up.

One is user Windows user-name - as I explained:
It doesn't follow Windows guidance as it contains an umlaut...
C:/Users/fjSchüssler
Try changing your user-name to fjSchussler or fjSchuessler ?
It needs just ASCII characters and some limited punctuation are required

Two is your computer-name [IT might need to address that].
Again, the name's characters requirement is much as stated above...

[fjsgruppe]

I see!
Thanks, I do that as soon as possible and will you the results!
re
fjs

[fjsgruppe]

Unfortunately ‘fjSchüssler’ is the name of the initial registration.
So it’s a risk and a lot of work to change that.
And windows seems to tolerate the ‘ü’.

What I found out:
There may be some problems with the ‘plugin manager’ and ‘Lord Of the Toolbars’[LOT].
Plugins activated or not activated, even deleted plugins or plugins I am sure of never integrated in LOT show up in the error message.
Thanks for your advise.
I managed to come around by storing/using some new templates.

re
fjs