How to use Fredo tools offline?

j_jones

@rich o brien said:

Your Sketchucation Tools is outdated.

Launch our ExtensionStore in SketchUp and update it. Click the Bell icon to get a list of extensions you need to update.

If there's no Bell icon click the Settings icon and the tool will scan for updates.

Restart SketchUp after updating and then try licensing again.

Sketchucation Tools 4.3.1 has a fix for the issue you are currently experiencing.

Okay, lauching the extension store now I see this view...

ext store

clicking the gear icon shos this:

gear view

with wifi on....

check license with wifi on

close Sketchup and turn off wifi, restart Sketchup, check license...

still not licensed...

...sigh....

Rich O Brien

Update your https://sketchucation.com/plugin/696-sketchucationtools

Even though the inner dialog states 4.3.1 you are actually running 4.2.9

Grab the rbz file from here

ExtensionStore | SketchUcation

3D SketchUp Community for Design and Engineering Professionals.

(sketchucation.com)

Use Extensions > Extension Manager to install it and then restart SketchUp.

Now run the Window > Libfredo Settings > Fredo6 Plugins Information for Sketchucation Support command to see if it returns 4.3.1

If it does then activate your license restart SketchUp just to be sure all is as it should be. Then go offline and see if the license nag you have experienced is no longer there.

j_jones

Everything is looking better now seems I can work offline. Thank you so much! ️

Rich O Brien

@j_jones said:

Everything is looking better now seems I can work offline. Thank you so much! ️

Great, just try and keep on top of your extension updates and you should be ok.

If you https://sketchucation.com/webshop/my-licences.php page doesn't allow releasing then those devices are running the older license system.

Glad it's sorted.

goldkeyequipment

To use Fredo Tools offline, you would need to have already installed the necessary software or plugins on your computer. Once the tools are installed, you can typically use them without an internet connection.

However, it's important to note that some functionalities or features may require occasional online connectivity, such as initial installation, updates, or license verification.

Therefore, it's recommended to check the specific documentation or user guides provided by Fredo Tools to understand the offline capabilities and any potential limitations of the tools you are using.

j_jones

@rich o brien said:

@j_jones said:

Everything is looking better now seems I can work offline. Thank you so much! ️

Great, just try and keep on top of your extension updates and you should be ok.

If you https://sketchucation.com/webshop/my-licences.php page doesn't allow releasing then those devices are running the older license system.

Glad it's sorted.

I'm sorry to report the problem has returned without any explanation...

Here's the output of Window->Libfredo Settings -> Fredo6 Plugins Information for Sketchucation Support

Fredo6 Plugins Information on 2023-07-30 19;43;17 -0700
--------------------------
- Platform; x86_64-darwin14 - Ruby; 2.2.4
- Sketchup; 17.3.116
- LibFredo6; v13.9a
- LibFredo6 Binary loaded
- Sketchucation ExtensionStore; 4.3.1
- SCFLicense; v6.1a - 72
- Fredo6 Plugins
    > TopoShaper v2.6a - licensed FULL
    > ToolsOnSurface v2.5a - licensed FULL
    > Curviloft v1.9a
    > FredoTools v4.3a
    > FredoGuides v2.4a
    > FredoSketch v1.2a
    > JointPushPull v4.6a - licensed FULL
    > Curvizard v2.4b - licensed FULL
    > FredoScale v3.5a - licensed FULL
    > ThruPaint v2.2a
    > FredoPortrait v2.8a
    > RoundCorner v3.3a - licensed FULL
    > VisuHole v1.4b - licensed FULL
    > FredoGhost v2.0a
    > FredoCorner v2.6a - licensed FULL
- SCFLicense directory present
    > Signature File; 2022-06-29 18;42;44 -0700
    > Curvizard; 2023-07-03 12;35;06 -0700
    > JointPushPull; 2023-07-03 12;34;56 -0700
    > ToolsOnSurface; 2023-07-03 12;34;29 -0700
    > VisuHole; 2023-07-03 12;35;58 -0700
    > RoundCorner; 2023-07-03 12;35;50 -0700
    > TopoShaper; 2023-07-03 12;34;17 -0700
    > FredoCorner; 2023-07-03 12;36;19 -0700
    > FredoScale; 2023-07-03 12;35;14 -0700

Launching the Extension Store, the window title shows 4.3.1

What is the problem now I wonder?

Rich O Brien

Update your Libfredo.

SketchUp Plugins | PluginStore | SketchUcation

SketchUp Plugin and Extension Store by SketchUcation provides free downloads of hundreds of SketchUp extensions and plugins

(sketchucation.com)

j_jones

@rich o brien said:

Update your Libfredo.

SketchUp Plugins | PluginStore | SketchUcation

SketchUp Plugin and Extension Store by SketchUcation provides free downloads of hundreds of SketchUp extensions and plugins

(sketchucation.com)

Ah! Thank you sir! I'm updated to LibFredo6: v14.1a

Hope that'll do it, thanks again

j_jones

It's happening again, this time I can't even use the tool even if I validate the license!

Everything was fine for a while but now it says I can't use Curviloft. So, I go online, reactivate the license, but as soon as I try to use it again, it says it's invalid....

not again

After validating the license through the web, I turn of the wifi off again

license never satisfied

But as soon as I try to use the tool, again, the same error, as above....

I can't use the tool at all now...

Here is the output of the Fredo plugins information

Fredo6 Plugins Information on 2023-09-06 17:34:45 -0700

Platform: x86_64-darwin14 - Ruby: 2.2.4
Sketchup: 17.3.116
LibFredo6: v14.1a
LibFredo6 Binary loaded
Sketchucation ExtensionStore: 4.3.1
SCFLicense: v6.1a - 72
Fredo6 Plugins

TopoShaper v2.6a - licensed FULL
ToolsOnSurface v2.5a - licensed FULL
Curviloft v1.9a - licensed FULL
FredoTools v4.3a
FredoSketch v1.2a
Animator v3.8a
JointPushPull v4.6a - licensed FULL
Curvizard v2.4b - licensed FULL
FredoScale v3.5a - licensed FULL
ThruPaint v2.2a
FredoPortrait v2.8a
RoundCorner v3.3a - licensed FULL
VisuHole v1.4b - licensed FULL
FredoGhost v2.0a
FredoCorner v2.6a
SCFLicense directory present

Signature File: 2022-06-29 18:42:44 -0700
Curvizard: 2023-07-30 19:53:00 -0700
JointPushPull: 2023-07-30 19:52:44 -0700
ToolsOnSurface: 2023-07-30 19:52:12 -0700
VisuHole: 2023-07-30 19:54:11 -0700
Curviloft: 2023-09-06 17:33:49 -0700
RoundCorner: 2023-07-30 19:53:54 -0700
TopoShaper: 2023-07-30 19:51:46 -0700
FredoScale: 2023-07-30 19:53:14 -0700

Thank you for any help
-j_jones

j_jones

now the crazy thing is appeased somehow, probably because I posted about it!

Don't know how long it will behave though...

Rich O Brien

It could be that your running Libfredo 14.1 and its recently updated to 14.2

I need to check with Fredo to see if something changed that could cause this to happen.

j_jones

@rich o brien said:

It could be that your running Libfredo 14.1 and its recently updated to 14.2 ...

Thank you again! I updated LibFredo and hopefully no more issues...

Rich O Brien

@j_jones said:

Thank you again! I updated LibFredo and hopefully no more issues...

Until 14.3

We are working on a better prompt for helping users to update necessary extensions.

rtrowski

@rich o brien said:

@j_jones said:

Everything is looking better now seems I can work offline. Thank you so much! ️

Great, just try and keep on top of your extension updates and you should be ok.

If you https://sketchucation.com/webshop/my-licences.php page doesn't allow releasing then those devices are running the older license system.

Glad it's sorted.

I'm having an issue releasing licenses on my 3 seats. I use a virtual desktop from VMware for work and I had assumed it was because the computer "wipes" itself every night. Is there any other way I can release these seats?

Rich O Brien

@rtrowski said:

I'm having an issue releasing licenses on my 3 seats. I use a virtual desktop from VMware for work and I had assumed it was because the computer "wipes" itself every night. Is there any other way I can release these seats?

I released your seats. Please make sure your devices are running Sketchucation Tools 4.3 and Libfredo 14+

Once you have those you can manage seats at https://sketchucation.com/webshop/my-licences.php