SCFLicense: Extension Licensing on Sketchucation

[Rich O Brien]

Install the trial using SketchUcation Tools 4.2.9

ExtensionStore | SketchUcation

3D SketchUp Community for Design and Engineering Professionals.

(sketchucation.com)

Then under the Tools > Fredo Collection > Curivloft > License you can buy a license.

Or visit https://sketchucation.com/plugin-list.php and purchase it there.

You will still need to install Sketchucation Tools 4.2.9 and LibFredo though.

SketchUp Plugins | PluginStore | SketchUcation

SketchUp Plugin and Extension Store by SketchUcation provides free downloads of hundreds of SketchUp extensions and plugins

(sketchucation.com)

[Digdaman]

I bought Fredo6Bundle2022 - A bundle of 8 plugin , and validated RoundCorner license.
It worked right after I validate it.
But,next time I launch SketchUp, The message"Trial Period Expired: RoundCorner" was displayde and it didn't work.

I　Re-validated Same license.　but, it never worked again.
I tried various ideas. uninstall, rebooted system and so on.

The　problem was not resolved. and all license sheats exceeded,
though　I try at same computer.

Please tell me what to do.

[Rich O Brien]

Visit https://sketchucation.com/webshop/my-licences.php and release seats

[Zuman]

Hi
I am trying to purchase Round Corner Plugin, while paying by PayPal after giving necessary info it doesn't proceed.

[mahsa1995]

I need Help please. im getting ERROR_09

I purchased my license a while ago but suddenly it said that its ran out but I have purchased the unlimited one.

I downloaded the file to validate it again but it keeps opening with wordpad and sketchup wont read it

how can i fix this

[Rich O Brien]

@mahsa1995 said:

I need Help please. im getting ERROR_09

Update Sketchucation Tools

ExtensionStore | SketchUcation

3D SketchUp Community for Design and Engineering Professionals.

(sketchucation.com)

Update LibFredo

SketchUp Plugins | PluginStore | SketchUcation

SketchUp Plugin and Extension Store by SketchUcation provides free downloads of hundreds of SketchUp extensions and plugins

(sketchucation.com)

[emsargeant]

I'm getting a validation error on my RoundCorner License. Message: 'request to sketchucation = Error_F09'.

When I check my license page on SketchUcation it says 0/3 seats...does that mean 0 available? Doesn't seem to allow 'releasing' seats. How can I resolve? Thx.

[Rich O Brien]

It looks like you're trying to validate FredoCorner and not RoundCorner from that screenshot.

[mahsa1995]

can i upgrade from Perpetual license to bundle ( its only been a few days since i got the license)

[Digdaman]

I need your help.
I bought Fredo6Bundle2022 - A bundle of 8 plugin , and validated RoundCorner license.
It worked right after I validate it.
But,next time I launch SketchUp, The message"Trial Period Expired: RoundCorner" was displayde and it didn't work.

I　Re-validated Same license.　but, it never worked again.
I tried various ideas. uninstall, rebooted system and so on.

The　problem was not resolved. and all license sheats exceeded,
though　I try at same computer.

Please tell me what to do.

---

---

---

[Krop]

Hello,
I have a trouble with all of my fredo6 bundle licenses- system drive on one of my devices broke down and I had to replace it- all licenses that were on that computer are blocked.
Could you please release all my fredo6 licenses to the pool so I can assign them to my devices again?

[TIG]

@Digdaman

Have you installed all of the latest versions of the extensions, and LibFredo, and the SketchUcation toolset [for the licensing] and SketchUp restarted ?

[TIG]

@Krop can't you free up licenses from the MyLicenses page at SketchUcation ?

If not come back and Fredo might need to get involved...

[tamergad81]

Thank you

[Digdaman]

@tig said:

@Digdaman

Have you installed all of the latest versions of the extensions, and LibFredo, and the SketchUcation toolset [for the licensing] and SketchUp restarted ?

Thank you for your answer.

SketchUcation ver 4.2.9
Fredo6 LiFredo6 ver 13.5a
Fredo6 RoundCorner ver 3.3a
sketchup ver 22.0.354

I have tried to restart sketchup , reboot PC, uninstall sketchup and re-install.

---

[fredo6]

@krop said:

Hello,
I have a trouble with all of my fredo6 bundle licenses- system drive on one of my devices broke down and I had to replace it- all licenses that were on that computer are blocked.
Could you please release all my fredo6 licenses to the pool so I can assign them to my devices again?

I reset all your licenses. So you need to revalidate on your computers.
Make sure that before validating, you upgrade to the latest versions of SCFLicense (v4.2.9) and LibFredo6 (v13.5a).

Fredo

[fredo6]

@digdaman said:

Thank you for your answer.

SketchUcation ver 4.2.9
Fredo6 LiFredo6 ver 13.5a
Fredo6 RoundCorner ver 3.3a
sketchup ver 22.0.354

I have tried to restart sketchup , reboot PC, uninstall sketchup and re-install.

You have 3 sets of bundle licenses and there may be confusion.
For whatever reason, some of them are not considered valid by the server (more exactly used by another computer). This explains that when you restart SketchUp, you get the Expired message, as if you were not licensed.

What I can do is to release all seats of all licenses and let you revalidate on the computer you use.

Just tell me.

Fredo

[Digdaman]

@fredo6 said:

@digdaman said:

Thank you for your answer.

SketchUcation ver 4.2.9
Fredo6 LiFredo6 ver 13.5a
Fredo6 RoundCorner ver 3.3a
sketchup ver 22.0.354

I have tried to restart sketchup , reboot PC, uninstall sketchup and re-install.

You have 3 sets of bundle licenses and there may be confusion.
For whatever reason, some of them are not considered valid by the server (more exactly used by another computer). This explains that when you restart SketchUp, you get the Expired message, as if you were not licensed.

What I can do is to release all seats of all licenses and let you revalidate on the computer you use.

Just tell me.

Fredo

One reason I can think of is the license　type of sketchup.

I use a company　floating license, so probably　It was recognized as a different PC even though it's same PC when I restart SketchUp.

[GiordanoBernard92]

Hello, it's the first time I write in the blogs so forgive me if I break any rule.
I've been using your amazing plugins by a long time, and I've been happy to purchase a bundle for keeping them in use.
I'm now faced with a problem, on the same machine I'm migrating from one OS to another with both installed on differrent partitions, I want to release my licenses from one OS to use them in the other. For some unknown I can't release them using the sketchucation page, so I released them from the sketchup licensing dialog. They result succesfully released from that dialog, but don't get released on the sketchucation page and I can't validate them in the other OS.

Could you please help me solve this problem?

Thank you in advance,
Giordano

---

---

---

[GiordanoBernard92]

Did my past message got through? I can't see it published