Reading numbers from external text file

TIG

If it has a space after the : and you want the answer as a float number, then use:
value = string.split(' ')[1].to_f - ignores any commas at end of string, it makes into a float
OR if unsure, but there's always a : use:
value = string.split(':')[1].lstrip.to_f

To read ALL of the lines in a file use:
lines = IO.readlines(file)

If you definitely always want line 66
string = lines[65]

OR find it by its variable, there are many ways - e.g.

string = ''
lines.each{|line|
  if line.lstrip =~ /["]x["][;]/ ### strip off leading white-space & starts "x";
    string = line
    break ### take first match
  end
}

Pixero

Thanks. Ill try with this.

Pixero

Next question.
This is the code I'm experimenting with:


@settings = []

def load_file(file_path, status)
  @filepath = UI.openpanel("Open File", "c;/", "TXT|*.txt||")
  @settings = File.readlines(@filepath)
  return 0   # Success
end

load_file(@filepath, true)

puts @settings[2].split(' ')[1].to_f

After loading the file I managed to get the number as a float but after running this I also get a:


3.4919929866069115 #This is a number I want to read. So this is fine.
"Nil result (no result returned or run failed)" #Why do I get this?

TIG

You don't need to return anything from the method.
So delete the unneeded line.
return 0 # Success

You haven't posted all of your code, so it could be something elsewhere ?

A simpler version would be...

@settings = []
def load_file()
  filepath = UI.openpanel("Open File", "c;/", "TXT|*.txt||")
  if filepath ### allows a user to Cancel
    @settings = File.readlines(filepath)
  end
end
load_file()
puts @settings[2].split(' ')[1].to_f
### to see what @settings looks like use;
p @settings
### This will show spacers, \", \n etc

Pixero

Thanks, but I still get the Nil result even after removing the "Return 0".
I even get it when running your code.

For now I'm just experimenting with this part so there is no other code.

The line I'm testing with looks like this:


    "x"; 3.4919929866069115,

TIG

Did you use the whole code with p @settings at the end ?
What do the first few lines of its output look like ?
Also adding: puts @settings[2].split(' ')
and puts @settings[2].split(' ')[1] to see what's up...

Pixero


["{\n", "  \"principalPoint\"; {\n", "    \"x\"; 3.4919929866069115,\n", "    \"y\"; -0.017301744356540385\n", "  },\n", "  \"viewTransform\"; {\n", "    \"rows\"; [\n", "      [\n", "        -0.9075910551963806,\n", "        0.4198243379864999,\n", "        -0.005099192261283809,\n", "        -31.940051338855746\n", "      ],\n", "      [\n", "        0.00419330408856825,\n", "        -0.003080616899800699,\n", "        -0.9999864629085424,\n", "        -0.10391287329462531\n", "      ],\n", "      [\n", "        -0.4198343634438959,\n", "        -0.9076001515170179,\n", "        0.0010354892297866703,\n", "        -17.250974969132418\n", "      ],\n", "      [\n", "        0,\n", "        0,\n", "        0,\n", "        1\n", "      ]\n", "    ]\n", "  },\n", "  \"cameraTransform\"; {\n", "    \"rows\"; [\n", "      [\n", "        -0.9075910551963807,\n", "        0.00419330408856825,\n", "        -0.41983436344389585,\n", "        -36.23062125433451\n", "      ],\n", "      [\n", "        0.41982433798650004,\n", "        -0.0030806168998006997,\n", "        -0.9076001515170179,\n", "        -2.2480967029645083\n", "      ],\n", "      [\n", "        -0.005099192261283809,\n", "        -0.9999864629085424,\n", "        0.0010354892297866703,\n", "        -0.24891673044480064\n", "      ],\n", "      [\n", "        0,\n", "        0,\n", "        0,\n", "        1\n", "      ]\n", "    ]\n", "  },\n", "  \"horizontalFieldOfView\"; 0.9813963064459168,\n", "  \"verticalFieldOfView\"; 0.6616350540688956,\n", "  \"vanishingPoints\"; [\n", "    {\n", "      \"x\"; -0.5541295463355106,\n", "      \"y\"; 0.0013923823242965234\n", "    },\n", "    {\n", "      \"x\"; 4.357757655415969,\n", "      \"y\"; -0.02365461394665286\n", "    },\n", "    {\n", "      \"x\"; 12.708844850226638,\n", "      \"y\"; 1807.4703594352652\n", "    }\n", "  ],\n", "  \"vanishingPointAxes\"; [\n", "    \"xPositive\",\n", "    \"yPositive\",\n", "    \"zPositive\"\n", "  ],\n", "  \"relativeFocalLength\"; 1.8716593429474995,\n", "  \"imageWidth\"; 5000,\n", "  \"imageHeight\"; 3214\n", "}"]
"[\"{\\n\", \"  \\\"principalPoint\\\"; {\\n\", \"    \\\"x\\\"; 3.4919929866069115,\\n\", \"    \\\"y\\\"; -0.017301744356540385\\n\", \"  },\\n\", \"  \\\"viewTransform\\\"; {\\n\", \"    \\\"rows\\\"; [\\n\", \"      [\\n\", \"        -0.9075910551963806,\\n\", \"        0.4198243379864999,\\n\", \"        -0.005099192261283809,\\n\", \"        -31.940051338855746\\n\", \"      ],\\n\", \"      [\\n\", \"        0.00419330408856825,\\n\", \"        -0.003080616899800699,\\n\", \"        -0.9999864629085424,\\n\", \"        -0.10391287329462531\\n\", \"      ],\\n\", \"      [\\n\", \"        -0.4198343634438959,\\n\", \"        -0.9076001515170179,\\n\", \"        0.0010354892297866703,\\n\", \"        -17.250974969132418\\n\", \"      ],\\n\", \"      [\\n\", \"        0,\\n\", \"        0,\\n\", \"        0,\\n\", \"        1\\n\", \"      ]\\n\", \"    ]\\n\", \"  },\\n\", \"  \\\"cameraTransform\\\"; {\\n\", \"    \\\"rows\\\"; [\\n\", \"      [\\n\", \"        -0.9075910551963807,\\n\", \"        0.00419330408856825,\\n\", \"        -0.41983436344389585,\\n\", \"        -36.23062125433451\\n\", \"      ],\\n\", \"      [\\n\", \"        0.41982433798650004,\\n\", \"        -0.0030806168998006997,\\n\", \"        -0.9076001515170179,\\n\", \"        -2.2480967029645083\\n\", \"      ],\\n\", \"      [\\n\", \"        -0.005099192261283809,\\n\", \"        -0.9999864629085424,\\n\", \"        0.0010354892297866703,\\n\", \"        -0.24891673044480064\\n\", \"      ],\\n\", \"      [\\n\", \"        0,\\n\", \"        0,\\n\", \"        0,\\n\", \"        1\\n\", \"      ]\\n\", \"    ]\\n\", \"  },\\n\", \"  \\\"horizontalFieldOfView\\\"; 0.9813963064459168,\\n\", \"  \\\"verticalFieldOfView\\\"; 0.6616350540688956,\\n\", \"  \\\"vanishingPoints\\\"; [\\n\", \"    {\\n\", \"      \\\"x\\\"; -0.5541295463355106,\\n\", \"      \\\"y\\\"; 0.0013923823242965234\\n\", \"    },\\n\", \"    {\\n\", \"      \\\"x\\\"; 4.357757655415969,\\n\", \"      \\\"y\\\"; -0.02365461394665286\\n\", \"    },\\n\", \"    {\\n\", \"      \\\"x\\\"; 12.708844850226638,\\n\", \"      \\\"y\\\"; 1807.4703594352652\\n\", \"    }\\n\", \"  ],\\n\", \"  \\\"vanishingPointAxes\\\"; [\\n\", \"    \\\"xPositive\\\",\\n\", \"    \\\"yPositive\\\",\\n\", \"    \\\"zPositive\\\"\\n\", \"  ],\\n\", \"  \\\"relativeFocalLength\\\"; 1.8716593429474995,\\n\", \"  \\\"imageWidth\\\"; 5000,\\n\", \"  \\\"imageHeight\\\"; 3214\\n\", \"}\"]"

Pixero

3.4919929866069115
"x";
3.4919929866069115,
"Nil result (no result returned or run failed)"

Pixero

3.4919929866069115
3.4919929866069115,
"Nil result (no result returned or run failed)"

Pixero

Here is the txt file I'm loading. (It's a json file from the beginning.)

test1.txt

TIG

Are you running this in the Ruby Console, or in some other console extension ?
Try this without the ' def'


filepath = UI.openpanel("Open File", "C;/", "TXT|*.txt||")
if filepath ### allows user to Cancel
  settings = File.readlines(filepath)
  puts settings[2].split(' ')[1].to_f
else
  puts "Canceled!"
end

TIG

Our posts crossed.
Both my versions of the code work fine with your TXT file, with no error [in Ruby Console].
So do you use a console-app ?

Pixero

Interesting.
Running your latest code in the console works but running it in SketchUp Ruby Code Editor by Alexander Schreyer gives the Nil result also.

I also tried your first version in the console and it worked without errors.
So is it safe to continue if it's just something in his Code editor app that causes the Nil result?

TIG

Most of these console-apps are not perfect...
I only ever use the Ruby Console.

Pixero

Thanks for all the help so far. I'm sure there will be more later on...
If only the Ruby console was multi lines. It's hard to edit in the small window.

TIG

I always edit my code in a Notepad++/TextWrangler window [with Ruby text-highlighting], then I copy/paste it into the Ruby Console's bottom bar + enter, to run it.
The Ruby Console accepts multi-line code if pasted, but you can only manually type in one line at a time!

Pixero

I use Notepad++ as well but use the ruby code editor when testing out snippets without having to restart SketchUp.
Now I’ll continue with the main work.