[Plugin][$] Profile Builder 2
-
@tommyk said:
I have found a slightly problematic issue with Profile Builder. I have noticed that when building profiles, profile builder does not respect the axis of the current context - only the main model axis. It gets difficult to use when designing rooms that are not aligned in the same axis as the main model. It would be great if it did!
Also goes for adding a custom profile - when adding a custom profile using the (+) button, the axis of the profile is taken from the axis of the model, and not the context in which the face is in.
I hope this issue can get fixed soon. I am being nit picky as Profile Builder 2 is a great plugin, and is only inches away from perfection..,
Thanks Tommy, a few others have commented on this issue and I will put in my TODO list. Hopefully, this can be fixed..
-
I suppose a work around is to save and open that context (component) as a separate model to use Profile builder, then reload?
-
he he i would do this..however my version is expired. next month i must go to my bank and must pay a visa. my fear is..if i have pay a visa...Whaat have found a way to pay via paypal.
@TommyK
the first part of ProfileBuilder2 is like followme...however more comfortable.
I must confess that i have not really understand what your problem is.pictures could help to understand better.
-
Does it have some way to follow 2 paths? Like a 2-rail sweep in other programs?
Just want to make sure I am not missing it.
-
Dale: An excellent plugin overall but I have this issue:
When I build a member from a profile that has a reversed shape (a "C" shape for example) it can not be edited with the trim or extend tools.
Trim Error message:
SketchUp
To trim, the end of the Profile Member must not be modified. Rebuild Profile Member?
Yes No
clicking yes has no effect
Extend Error message:
SketchUp
The selected end has been modified and cannot be extended.
OK
https://www.dropbox.com/s/3qwolfqdexm7140/PB2%20error%20trim.jpg?dl=0
https://www.dropbox.com/s/85pt26b8h2ohnau/PB2%20error.jpg?dl=0Workaround / solution?
SB
-
@sabba said:
Dale: An excellent plugin overall but I have this issue:
When I build a member from a profile that has a reversed shape (a "C" shape for example) it can not be edited with the trim or extend tools.
Trim Error message:
SketchUp
To trim, the end of the Profile Member must not be modified. Rebuild Profile Member?
Yes No
clicking yes has no effect
Extend Error message:
SketchUp
The selected end has been modified and cannot be extended.
OK
https://www.dropbox.com/s/3qwolfqdexm7140/PB2%20error%20trim.jpg?dl=0
https://www.dropbox.com/s/85pt26b8h2ohnau/PB2%20error.jpg?dl=0Workaround / solution?
SB
Thanks for reporting! It could be a bug. I'll look into it.
-
@moriturimax said:
Does it have some way to follow 2 paths? Like a 2-rail sweep in other programs?
Just want to make sure I am not missing it.
Sorry, there is no such feature in PB2.
-
If you search for Profile Builder 2 or profilebuilder2 on Extension Warehouse you get "Not Found"
-
@bob james said:
If you search for Profile Builder 2 or profilebuilder2 on Extension Warehouse you get "Not Found"
Thanks Bob, I am aware of this and so is EW. I have been told that a fix is in the queue.
-
I'm experimenting with making a Railroad wheel. What am I doing wrong?
-
Will, Bob, draw a centerline, everything on the sides of the centerline is going to spin around and create a circular part. So get rid of the both short ends, just need the smaller section.
Ken
-
@unknownuser said:
Will, Bob, draw a centerline, everything on the sides of the centerline is going to spin around and create a circular part. So get rid of the both short ends, just need the smaller section.Ken
Ken: Thank you for your response. Unfortunately, I don't understand.
- I draw a horizontal centerline first and then click on revolve? (that didn't seem to make any difference)
- What do you mean by the "short ends"?
- What do you mean by the "smaller section"?
The complete wheel on the left of the previous post was created in the "normal" way: create a circle and follow that path with the profile (with no offset).
What is "Offset" supposed to do? I assumed it would offset the profile axis of revolution.
It makes no difference whether the "Revolve Profile" axis is drawn vertically or horizontally, it still revolves the profile around the axis shown in blue.
-
-
Oops, my bad. I gave these instruction using Quick Lath Around Selected Axis. So I guess I have confused the issue.
Note, I work with ACAD drawing of pipelines, flanges and other round parts. I use the plugin "Quick Lath around Selected Axis". I just copy over the lines, get the center line and presto, I have a flange, pipe whatever.
I didn't mean to confuse the issue, sorry.
Ken
-
here some samples
-
A summary of some useful links:
Assemblies
http://profilebuilder4sketchup.com/category/assembly/Profiles
http://profilebuilder4sketchup.com/category/profile-library/Learn
http://profilebuilder4sketchup.com/learn/Forum
http://sketchucation.com/forums/viewtopic.php?f=323%26amp;t=61283 -
This plugin is AWESOME! Must buy for sure. I accidentally stumbled across it and knew I needed to purchase and install. Unlike many of the posts here and in the other PB threads I've noticed, I had no issues purchasing or installing (into skp 2015 pro), and have had no crashing with it. I do have some comments in no particular order:
A way to submit assemblies & profiles to someone would be nice. You say they can be found on the 3d warehouse, but I'm not sure how to find them other than using yours from your site.
No way to apply materials to a profile from within the assembly editor
No way to orient materials applied to profiles other than to create new materials (not ideal)
Some of the labels have obscure meanings. (Up/down offset is just elevation by another name?)
The profile/assembly search windows do not show folders (makes it tedious to organize profiles & assemblies by a type logical to me, and I'd prefer not to sort through thousands of profiles/assemblies every time I want to find one), and could use some extra navigation features (forward/back arrow).
The 'search' icon should probably be an 'open' icon
The way the preview is generated is obscure to me. Sometimes it focuses on what I'm editing, sometimes not, sometimes it just doesn't do what I want it to and I don't know why.
The "apply assembly attributes" and "edit member properties" buttons have the same iconography, but do slightly different things. Personally, I'm not sure the little popup window for profiles is useful, maybe replace it with a "apply profile attributes" (exactly the same as the assembly button) and add a button that brings the window back up as a kind of eyedropper tool allowing the user to select what profile (or maybe assembly!) attributes to eyedrop.
I'd be nice to be able to adjust the profiles used from within the assembly dialogue. Especially for their start points, rotation, etc.
A couple (non-breaking) glitches I've noticed:
Hitting enter on data entry in any box doesn't do anything. You need to switch to the next box to get the data to apply. - Especially important when building assemblies, as it's tricky to figure out whether I've moved something the correct distance.
Pushing the arrows on the profile in the assembly window on a loaded assembly allows you to go infinitely beyond the number of profiles in the assembly. I think it happens when you've selected a profile that exists in one assembly, load a new assembly with fewer profiles, and then try to cycle through them.
And some wishlist items:
It seems like this is so close to being able to do all things parametric. If it worked in 2 dimensions (instead of just linearly), I can see using it to generate any-height walls, windows, doors, etc. etc. (Right now, I'd need to make a new assembly for each window/door height. Not the end of the world, but more work than I'd like to do).
Making it so the tool can cut assemblies (possibly using solid tools) would make windows & doors very easy.
Allowing me to draw a thing using profiles and components and translate them to an assembly would be awesome.
(Sorry if this is a bump, but this seems to be the main thread)
-
Wow, thanks for the great feedback, meaker! Really useful comments!
@meaker vi said:
A way to submit assemblies & profiles to someone would be nice. You say they can be found on the 3d warehouse, but I'm not sure how to find them other than using yours from your site.
Assemblies and profiles are just SKP files. You can share them and upload them to 3DWH just like any other SKP file. If you have uploaded an assembly, let me know and I'll post it on my website.
@unknownuser said:
No way to apply materials to a profile from within the assembly editor
Just click on the profile icon in the Assembler Dialog (just next to the Profile name) and you can edit all the properties of the profile, including material@unknownuser said:
No way to orient materials applied to profiles other than to create new materials (not ideal)
True - not ideal@unknownuser said:
Some of the labels have obscure meanings. (Up/down offset is just elevation by another name?)
Up/down offset refers to the 'local up direction'. This is not the same as elevation if the path is sloped up or down. I had hoped that the hover thumbnails clarified this...@unknownuser said:
The profile/assembly search windows do not show folders (makes it tedious to organize profiles & assemblies by a type logical to me, and I'd prefer not to sort through thousands of profiles/assemblies every time I want to find one), and could use some extra navigation features (forward/back arrow).
Yes - this is something I plan to improve in the next update@unknownuser said:
The 'search' icon should probably be an 'open' icon
..probably@unknownuser said:
The way the preview is generated is obscure to me. Sometimes it focuses on what I'm editing, sometimes not, sometimes it just doesn't do what I want it to and I don't know why.
The preview is actually a thumbnail that is created by SketchUp of the Assembly Component. It works most of the time but sometimes it does weird things and I am not sure why. Helpful hint: the orientation of the preview camera will match the current SketchUp camera view@unknownuser said:
The "apply assembly attributes" and "edit member properties" buttons have the same iconography, but do slightly different things. Personally, I'm not sure the little popup window for profiles is useful, maybe replace it with a "apply profile attributes" (exactly the same as the assembly button) and add a button that brings the window back up as a kind of eyedropper tool allowing the user to select what profile (or maybe assembly!) attributes to eyedrop.
Interesting...Perhaps some improvements could be made here.@unknownuser said:
I'd be nice to be able to adjust the profiles used from within the assembly dialogue. Especially for their start points, rotation, etc.
See above - this can already be done.@unknownuser said:
Hitting enter on data entry in any box doesn't do anything. You need to switch to the next box to get the data to apply. - Especially important when building assemblies, as it's tricky to figure out whether I've moved something the correct distance.
Yes - this should be improved, Enter should apply the current setting.@unknownuser said:
Pushing the arrows on the profile in the assembly window on a loaded assembly allows you to go infinitely beyond the number of profiles in the assembly. I think it happens when you've selected a profile that exists in one assembly, load a new assembly with fewer profiles, and then try to cycle through them.
Right - there are some issues here that need to be fixed.@unknownuser said:
It seems like this is so close to being able to do all things parametric. If it worked in 2 dimensions (instead of just linearly), I can see using it to generate any-height walls, windows, doors, etc. etc. (Right now, I'd need to make a new assembly for each window/door height. Not the end of the world, but more work than I'd like to do).
Making it so the tool can cut assemblies (possibly using solid tools) would make windows & doors very easy.
Allowing me to draw a thing using profiles and components and translate them to an assembly would be awesome.
Great suggestions, thanks! If you think of any more, please let me know.
-
Whaat, could you add random move\scale\rotate parameters (per axis)for profile\assembly members?
-
@rv1974 said:
Whaat, could you add random move\scale\rotate parameters (per axis)for profile\assembly members?
Yes - that's fairly easy to do, but I would prefer not to add so many settings to the Assembler dialog for a feature that would be used fairly rarely by the average user (I assume). Besides, there are other plugins that can do this - it is an extra step by still much faster than doing it manually.
For example - are you familiar with this one?
https://extensions.sketchup.com/en/content/clf-scale-and-rotate-multiple
Advertisement