[Plugin] 3D Parametric Shapes - makes placeable components

johnwmcc

So sorry - I DID publish it at least once! But maybe not after my very last edit. Thanks again.

J

blajnov

Bug now fixed in v2.5.2 - I'd made a typo in parametric.rb in the Module name - sorry.

Works for me now.

RBZ file uploaded both to Plugin Store and to the first post in this thread.

Dear johnwmcc, in your build tool does not work sphere ...
I use SketchUp PRO 2015
PS: By the way, in SketchUp PRO 8, the same Problem

TIG

I have just tested it and the sphere-tool works correctly.
What values are you entering into the dialog for the sphere's radius and segments ?

What "doesn't work" ?

blajnov

@tig said:

I have just tested it and the sphere-tool works correctly.
What values are you entering into the dialog for the sphere's radius and segments ?

What "doesn't work" ?

Does not work with the default settings, as well as changing the radius and number of segments in a big way, nothing happens, ie the scope does not appear in the scene ...

Chisaina

Hello, I have a similar volume (sphere) will not appear on the stage

johnwmcc

I find I now get the same thing (not working) here - nothing is drawn.

Will investigate asap.

TIG

Using the default of 10mm [or anything else!] the error message is:

@unknownuser said:

Error: #<NameError: uninitialized constant JWM::JWMShapes::Sphere::PolygonMeshHelper>
C:/Users/TIG/sketchUcloud/plugins/jwm_shapes/jwm_shapes.rb:984:in draw_sphere' C:/Users/TIG/sketchUcloud/plugins/jwm_shapes/jwm_shapes.rb:956:in create_entities'
C:/Users/TIG/sketchUcloud/plugins/jwm_shapes/parametric.rb:49:in initialize' C:/Users/TIG/sketchUcloud/plugins/jwm_shapes/jwm_shapes.rb:946:in new'
C:/Users/TIG/sketchUcloud/plugins/jwm_shapes/jwm_shapes.rb:946:in create' C:/Users/TIG/sketchUcloud/plugins/jwm_shapes/jwm_shapes.rb:1731:in block in module:JWMShapes'
SketchUp:1:in `call'

This is weird as it worked for me before !
Looks like a missing module/class ?
I also get the error with Dome etc...

TIG

mesh.extend(PolygonMeshHelper)
should be
mesh.extend(JWM::Shapes::PolygonMeshHelper)
three times...

johnwmcc

I wonder, TIG, if you can help me understand what's gone wrong in trying to separate the code here from that in the older SU Shapes on the Extension Warehouse.

The current problem is a name error: I get this error for the Dome and Sphere tools now, which both try to call mesh_additions.rb and fail. The other shapes don't need mesh_additions.rb, so still work properly.

Error; #<NameError; uninitialized constant JWM;;JWMShapes;;Sphere;;PolygonMeshHelper>

My overall code structure for the Sphere tool goes as follows (Dome has just the same structure), and I don't really understand it (just copied from SU Shapes!).

file jwm_shapes.rb has:

module JWM;;JWMShapes
...
  class Sphere < Parametric
  ...
  end # class Sphere
...
end # module JWMShapes

file parametric.rb has:

module JWM;;JWMShapes
  class Parametric
  ...
  end # class Parametric
end #module JWM;;JWMShapes

file mesh_additions.rb has:

module JWM;;Shapes
...
  class PolygonMeshHelper
  ...
  end #class PolygonMeshHelper
...
end #module JWM;;Shapes

Apparently, instead of (as I expected) the Sphere class looking for

JWMShapes;;Shapes;;PolygonMeshHelper

it is looking instead for

JWM;;JWMShapes;;Sphere;;PolygonMeshHelper

What have I done wrong here, and how do I fix it? If you can help, I'll be most grateful

[Later] The original SU Shapes named the overall module CommunityExtensions instead of JWM, and the mesh_additions.rb code says

module CommunityExtensions;;Shapes
...
  module PolygonMeshHelper
  ...
  end # module PolygonMeshHelper
...
end #module CommunityExtensions;;Shapes

I.E., as well as the name change JWM<-->CommunityExtensions and JWM::JWMShapes<-->CommunityExtensions::Shapes, PolygonMeshHelper was a module, not a class.

Changing it back from class to module doesn't seem to fix the problem.

Looking at the above, I see that my mesh_additions.rb SHOULD say JWM::JWMShapes instead of JWM::Shapes

module JWM;;JWMShapes

, but changing that doesn't seem to fix things either.

Help please, if you can! I'm temporarily stuck, and thoroughly confused.

johnwmcc

I see you posted again while I was replying. Many thanks.

Will make the changes asap.

TIG

I made the three simple changes which I suggested earlier... and it works without errors.

You are getting yourself into a tangle...

Once you put a sub-module named within your all-encompassing 'JWM' module, then its name can be the same as similar names used in others' code...
The nesting separates them...
Calling them by your path JWM::... will avoid any that are poorly written by others and are 'global'...

So be consistent use 'JWM::Shapes', OR if you must 'JWM::JWMshapes' etc consistently...
Use Notepad++ with all affected files open and fine replace in all so they are internally consistent...
Perhaps draw out on a sheet of A4 the nested relationships of these modules/classes.
The full path I changed to works...

johnwmcc

Once again, TIG, thank you for cleaning up my muddle, and for explaining what's gone on.

I will make the changes on my original copy here too, and go back to just called the sub-modules by the same name as the SU Shapes ones - simply Shapes.

Have you updated the Plugin Store rbz file, or do I still need to fix the files here then upload them? And would it now be better to delete the attached file in the first post, and replace that by a link to the Plugin Store?

Must stop now for a while - will resume later tonight.

TIG

@johnwmcc said:

Once again, TIG, thank you for cleaning up my muddle, and for explaining what's gone on.

I will make the changes on my original copy here too, and go back to just called the sub-modules by the same name as the SU Shapes ones - simply Shapes.

Have you updated the Plugin Store rbz file, or do I still need to fix the files here then upload them? And would it now be better to delete the attached file in the first post, and replace that by a link to the Plugin Store?

Must stop now for a while - will resume later tonight.
Please update your own files / RBZ in the PluginStore.
But please remember to click on Publish afterwards
I would recommend that you just have the one RBZ in the PluginStore, and add a link to its entry inside 'download' tags.
Put that in the very first post: when I update a plugin I usually also add it into that announcement post - a one-click direct-link means that the reader doesn't have to find it again, either in the first-post or by looking within the PluginStore itself...
The proper linking URL is http://sketchucation.com/pluginstore?pln=jwm_shapes

johnwmcc

Plugin store updated to v2.5.3, and first post in this thread now links to it.

Downloaded and tested it here in SU2015.

blajnov

@johnwmcc said:

Plugin store updated to v2.5.3, and first post in this thread now links to it.

Downloaded and tested it here in SU2015.

Works... Thanks!!!

JBJDesigns

@johnwmcc said:

Jo Ann - have you ever had another version of Shapes installed, whether from the SketchUcation Plugin store, or SketchUp or Trimble Extension Warehouse? There may still be a conflict, if so.

Please go to your AppData/Roaming/Sketchup/SU 2014/Sketchup/Plugins folder, and delete any existing file(s) called shapes.rb or su_shapes.rb, jwm_shapes.rb or jwm_shapes_loader.rb; and delete any existing folder(s) with the name su_shapes or jwm_shapes (including all that folder's contents).

Then reinstall the current version (v2.5 at time of writing) of the plugin from the Plugin Store here.

If that doesn't work, I'm stumped.

Best wishes, and I hope this works.

John McC

Hi John -- I just updated your 3D Parametric Shapes script, and after restarting SketchUp, it works!!!!! Yeah!!!!!. -- Jo Ann

JBJDesigns

Hi John--

I get the following error message when I open SketchUp 2014; can you fix this? Thanks! Jo Ann

JBJDesigns

@tig said:

I can't get it to do that !
What's the start of the error message say ?

Hi TIG,

Doesn't matter... I just downloaded (updated) John's 3D Parametric Shapes script and it works!

Thanks,
Jo Ann

johnwmcc

Glad you got it going again with little trouble.

Einstein

Great thanks, johnwmcc, for this plugin! Did you consider designing a toolbar for it? I'm sure for many users it became one of the very basic tools in SU. Having it accessible on top of the screen would be nice