Mini-challenge

jeff hammond

The DC is not working for me for some reason -- I see it and formulas, but no interactivity.

use 'component options'.. not 'component attributes'..

thomthom

you can find all the info of the hypotenuse (green) in a variety of ways .. (for instance, a^2 + b^2 = c^2 to get its length.. you'll know a & b in this case… then trig for the angles)

that hypotenuse is also the the hypotenuse of the un-trimmed board (red).. so you know the board width and the length of its hypotenuse which means you can get all other angles and lengths..

I was suspecting something like that - but my trigonometry knowledge was all too poor that I dared place bets on it.

@unknownuser said:

for whatever reason, i still think there might be a way to do it in sketchup itself.. maybe jean L can come up with something

I also wonder this - but I also fear it might - due to lack of true arcs.
Where is Simon Le Bon btw..?

jeff hammond

@thomthom said:

@unknownuser said:

you can find all the info of the hypotenuse (green) in a variety of ways .. (for instance, a^2 + b^2 = c^2 to get its length.. you'll know a & b in this case… then trig for the angles)

that hypotenuse is also the the hypotenuse of the un-trimmed board (red).. so you know the board width and the length of its hypotenuse which means you can get all other angles and lengths..

I was suspecting something like that - but my trigonometry knowledge was all too poor that I dared place bets on it.

SOH CAH TOA

that's one of the things that seemed to stick with me after leaving school..

Sine = Opposite/Hypotenuse
Cosine = Adjacent/Hypotenuse
Tangent = Opposite/Adjacent

Dave R

That stuck with me, too. I can't remember who I took to prom, though.

thomthom

@unknownuser said:

Sine = Opposite/Hypotenuse
Cosine = Adjacent/Hypotenuse
Tangent = Opposite/Adjacent

Trouble is that I don't even remember what to use of this. I'm really annoying - I always have to look up this stuff, reading for a while, whenever I need to do such work with my plugins. ...which, when you place plugins for 3D software... ...I really should be knowing this...

thomthom

@jason_maranto said:

Well, I figured out some of the accuracy issue on my last approach -- a bit of user error on my part since I was rotating the guidepoint to the wrong place and also the accuracy setting of the rotate tool was not set high enough... actually this still isn't exactly accurate (rotated to 45.6085) but it's pretty close now.

Try with the posts further apart - then you'll catch accuracy issue much easier. When it's close to 45 degrees it's harder to spot.

jason_maranto

Well, I figured out some of the accuracy issue on my last approach -- a bit of user error on my part since I was rotating the guidepoint to the wrong place and also the accuracy setting of the rotate tool was not set high enough... actually this still isn't exactly accurate (rotated to 45.6085) but it's pretty close now.

@Jeff - I checked every aspect of interacting with a DC, it shows nothing for me.

Edit -- Gotcha, you have to actually open the model instead of bringing it in as a component.

Best,
Jason.

jeff hammond

@jason_maranto said:

@Jeff - I checked every aspect of interacting with a DC, it shows nothing for me.

oh man.. that reminds me of some problem with sharing dynamic components.. are you directly opening the file i posted or are you bringing it in to an existing model?

you have to just open the file i posted then the options should be available..
(or something like that.. i remember having problems with bringing in DCs from the warehouse into existing models and none of the options were available.)

jeff hammond

@thomthom said:

@unknownuser said:

Sine = Opposite/Hypotenuse
Cosine = Adjacent/Hypotenuse
Tangent = Opposite/Adjacent

Trouble is that I don't even remember what to use of this. I'm really annoying - I always have to look up this stuff, reading for a while, whenever I need to do such work with my plugins. ...which, when you place plugins for 3D software... ...I really should be knowing this...

ha.. i always figured you ruby gurus were math wizards..
nice to know you're sitting around looking things up on a per case basis like the rest of us

thomthom

@unknownuser said:

ha.. i always figured you ruby gurus were math wizards..

You really don't need to muddle around with math too much when making plugins for SketchUp. Their API is doing lots of the heavy work. I don't even fully understand the transformation matrix - though reading up on that now.

@unknownuser said:

nice to know you're sitting around looking things up on a per case basis like the rest of us

I do that for everything I do - always. Simply because I like to know I'm doing stuff correct and efficient.

jason_maranto

This method still works as expected no matter the distance -- the problem is just that the rotate tool is not precise enough to put the guidepoint exactly where it should be.

@Jeff -- yeah, sorry my habit is to bring them into a model via the component browser, so it was my fault.

Best,
Jason.

gilles

I 've found a tricky way.

Mini-challenge.skp

jeff hammond

@dave r said:

That stuck with me, too. I can't remember who I took to prom, though.

(I don't think I even went to prom.. maybe)

jeff hammond

@gilles said:

I 've found a tricky way.

really? sweet!
I'm on a phone now so I can't see it but the suspense is killing me

can anyone verify?

jason_maranto

Wow, that is tricky... I never would have approached it that way.

What gave you the answer?

Best,
Jason.

andybot

Nice one! works for me!

gilles

I dont even know, just an intuition.
So do I won something?

thomthom

@gilles said:

So do I won something?

Yes - the honor of authoring the next challenge!

thomthom

Unfortunately - the lines are not parallel:

jeff hammond

@thomthom said:

Unfortunately - the lines are not parallel:
[attachment=0:1xhfujx7]Accuracy.png[/attachment:1xhfujx7]

bah!
I was hoping gilles nailed it