Altared Images
-
Close, its definitely for holding something down
-
Paul
So glad to see you back. The Church imagery is beyond stunning.
As for your personal project, it looks to me like it is a mounting platform for The Antikythera mechanism, or a really large septic field "D" box.
Welcome back. -
@paul russam said:
It may seem like I've only ever worked on this project bit its not true, ITS NOT TRUE I TELL YOU!!!
They've either been for too boring or in the case of the prison far to sensitive to show.
This is a little something I'm having fun with for my own self gratification, can you guess what it is?You said it yourself. It is a self-gratification machine.
-
-
I've just kicked off this weekends panorama, I've set Twilight to save it every 10mins to my dropbox folder.
Here's a link to it:Twilight tends to create big jpegs (opening and resaving them usually halves their size) so be warned if you chose to view it. It could be 10Mb or more hence why I've done a URL link and not an IMG link here.
As I said it'll be updated every 10mins so it'll get more refined as time goes on.
-
well head or blowout preventer
-
@paul russam said:
Here's a link to a very rough YouTube vid showing the Pixeet app on my iPad:
very very
-
@roger
Only in a darkened room@Fletch
You try holding an iPhone next your your ear with an iPad at arms length and spinning on the spot. If it wasn't for the fact that I'd sensibly had my 11am whisky it'd been a lot worse.
@unknownuser said:
well head or blowout preventer
Nope
I'll give you a clue, Inside the VAB an S-IC, S-IIB, S-IVB, LM,SM and CM are stacked on an MLP/LUT and then taken using the CT to either LC39A or LC39B whereupon the CT parks the MLP/LUT upon 6 of the things above
Come on I'm practically drawing you a picture
-
Tiedowns for the Mobile Launch Platform
VAB - Vehicle Assembly Building
S-IC, S-IIB, S-IVB, LM,SM and CM - Vehicle stages
MLP/LUT - Mobile Launch Platform/Umbilical Tower
CT - Crawler Tractor
LC39A or LC39B - Launch Pads -
@paul russam said:
Inside the VAB an S-IC, S-IIB, S-IVB, LM,SM and CM are stacked on an MLP/LUT and then taken using the CT to either LC39A or LC39B whereupon the CT parks the MLP/LUT upon 6 of the things above
How many whiskies did you say you had?
-
Mr James is quite right.
I got the as built drawings for the Mobile launch platform/Launch umbilical tower for the SaturnV, the scale of it is just fantastic. 78 pages of what you see below!I've seen a few models but I fancied doing my own, There are lots of photos of the Saturn V but finding good reference photos of the launch platform is hard work.
-
You'd think that with something this massive they could have sprung for something a little beefier than those '49 Buick shock absorbers
-
If I've understood it right, they're adjusters. the top and bottom connectors are threaded into the centre section and it's 8 sided like a big nut. Turning it with what must be the mother of all spanners would enable them to adjust the tie down's angle. That part of the drawing was hard to read.
There are 2 ball joints (one at the top, one at the bottom) within the tie down post. I asume they'd have to adjust the tie downs position due to thermal expansion etc on the Launch platform.
-
This project is staggering. Wow. I have thoroughly enjoyed seeing all your fabulous WIP shots. Thanks for posting.
-
@paul russam said:
Last nights render.....
...O-O-o!
...Great,really Great!Thanks Paul!
-
Here's this weekend's panorama. 64 hours on a Core2 Quad 2.5Ghz 4000x2000 jpeg
-
Could I ask what the stats for this model? (Apologies if I've missed it elsewhere).
Faces/mb etc?
-
Edges : 4,573,393
Faces : 2,120,510
Components : 35,953
Groups : 6,100
Comp Definitions : 958
Layers : 63
Material : 256Size : 65.5 Mb
Zipped : 41.5 Mb -
really great stuff. Nice idea with the panoramas. Very inspiring!
I have some problems with twilightrender with huge models and big imagesizes. Mostly twilightrender gets stuck.
-
I'm using XP and this model wouldn't render, it would get through the processing stage and then go straight to Complete without rendering anything. I then found this thread on the Twilight forum and it enabled me to have enough free memory to render it.
Additionally I used ThomThom's CleanUp plugin a extensively to purge a lot of waisted faces/edges etc. At one point I copied the model several times and in each one cleared out everything except floors or walls or windows etc. I then cleaned that particular model of everything (layers/styles/scenes/edges/faces etc etc)and then reimported it into a clean SketchUp file. This got rid of a lot of stuff I didn't even know was in there.
I thought I'd been efficient in my modeling but CleanUp showed just how wrong I was.
Advertisement