[Plugin] ReGlue

[rv1974]

@tig said:

@rv1974 said:

Does this API the Great and Powerful, allows to select all the components glued to a preselected face? If yes, maybe the script could take one face, select all the glued and reglue; then go to another face, repeat reglueing, and so on?
ToomyK's version a few posts back does that.
Just replace the text in the RB file with his alternative and save it.
Use a plain-text editor like Notepad++ to do the editing.

No, TommyK's code works only with one face.
@Pixero, the connection between MoveAlong and reglueing slips away from me.

[rv1974]

@tig said:

How is the code to determine which of the selected components gets glued to which selected face ?
Please outline the 'logic'...

Thats what I tried to ask you earlier- Whether API allows to detect the components glued to a preselected face. IF the answer is YES, then MAYBE the script could(?) progressevly take face by face and reglue corresponding components.

[hdpv]

@rv1974
I did this but it’s small script. Select face and components for reglue.

[rv1974]

@hdpv said:

@rv1974
I did this but it’s small script. Select face and components for reglue.

and components? or face only?

[TIG]

There is a method:
glued = face.get_glued_instances
And it'd be easy to grep then iterate all of the faces and their glued components etc...
BUT there's no API ' .could_be_glued_instances' method...

BUT here's some possible [pretty much untested] code which might just do it...

ctr=0
model=Sketchup.active_model
faces=model.active_entities.grep(Sketchup;;Face)
comps=model.active_entities.grep(Sketchup;;ComponentInstance).find_all{|e|
  e.definition.behavior.is2d? && ! e.glued_to
}
### collect if comp can glue, but not glued !
cct=comps.length
faces.each{|f|
  plane=f.plane
  norm =f.normal
  comps.dup.each{|e|
    pt=e.transformation.origin
    nm=e.transformation.zaxis
    if pt.distance_to_plane(plane)==0 && norm==nm
      ### glue-able
      cp=f.classify_point(pt)
      if cp==Sketchup;;Face;;PointInside || cp==Sketchup;;Face;;PointOnEdge || cp==Sketchup;;Face;;PointOnVertex
        ### on face so can glue
        e.glued_to=f
        comps.delete(e)
        ctr+=1
        ### reduce tested comps collection for speed
      end
    end
  }
}
puts "\n\nReglued #{ctr} of #{cct}" ### print how many reglued

[rv1974]

@TIG This plugin reglues multiple components in SU 2022. In v2023 and newer it reglues only one component.
What is the reason for this degradation? Thanks

[TIG]

@rv1974

This plugin is over a decade old !
As far as I recall, and tell from the code and version, it has always needed a selection of one face and one component to work. for 19 years.
Although I do see from my posts do speaks of one or more components being processed...

As far as I can see this old code is very simplistic... e.g.

It does not check for gluing properties, or face-normal, or Z-axis, or position on the face.plane, or transformation.origin point on the face at all.

If it checked for several components being on the face and sharing the face.normal as their Z-axis etc, then it would be possible the get it to process several gluing components. However, this would require a complete rewrite...

I'll back check...

[TIG]

Here's v2.0 in the PluginStore...
https://sketchucation.com/pluginstore?pln=Re_Glue
It now allows multiple pre selected component-instances, but still only one preselected face.
These are glued to the face [is possible], any errors or unsuitable instances are reported in the Ruby Console...

[rv1974]

@TIG Many thanks!

[designerbursa]

@rv1974

def self.glue_components_to_faces
  model = Sketchup.active_model
  selection = model.selection

  return UI.messagebox("Error: No selection!") if selection.empty?

  faces = selection.grep(Sketchup::Face)
  components = selection.grep(Sketchup::ComponentInstance)

  return UI.messagebox("Error: Select faces and components!") if faces.empty? || components.empty?
  
  model.start_operation("Glue Components to Faces", true)

  begin
    components.each do |component|
      closest_face = find_closest_aligned_face(component, faces)
      component.glued_to = closest_face if closest_face
    end
  ensure
    model.commit_operation
  end
end

def self.find_closest_aligned_face(component, faces)

  component_normal = component.transformation.zaxis
  closest_face = faces.min_by { |face| face.normal.angle_between(component_normal) }
  closest_face

end

[rv1974]

@designerbursa what do you mean?

[designerbursa]

@rv1974 I developed the code for pasting on all selected surfaces at once, it would be useful for everyone if it is updated in this way.

[rv1974]

@designerbursa
I might be missing something but currently I can do it without any plugin

[designerbursa]

@rv1974 If you can paste without extensions, I really congratulate you...

[rv1974]

@designerbursa
?

[designerbursa]

@rv1974 I am using Sketchup 2021 version

[designerbursa]

@designerbursa ```

module GlueComponentsToFaces
  extend self

  def glue_components_to_faces
    model = Sketchup.active_model
    selection = model.selection

    if selection.empty?
      return UI.messagebox("Error: No selection! Please select faces and components.")
    end

    faces = selection.grep(Sketchup::Face)
    components = selection.grep(Sketchup::ComponentInstance)

    if faces.empty? || components.empty?
      return UI.messagebox("Error: Select faces and components!")
    end

    model.start_operation("Glue Components to Faces", true)

    begin
      components.each do |component|
        closest_face = find_closest_aligned_face(component, faces)
        component.glued_to = closest_face if closest_face
      end
    rescue => e
      UI.messagebox("An error occurred: #{e.message}")
    ensure
      model.commit_operation
    end
  end

  def find_closest_aligned_face(component, faces)
    component_normal = component.transformation.zaxis
    closest_face = faces.min_by { |face| face.normal.angle_between(component_normal) }
    closest_face
  end
end

# Adding a menu item for ease of use in SketchUp
if not file_loaded?(__FILE__)
  UI.menu("Plugins").add_item("Glue Components to Faces") {
    GlueComponentsToFaces.glue_components_to_faces
  }
  file_loaded(__FILE__)
end

### I haven't tested it on the 2024 version but you can try this, maybe it will work. It works smoothly on my 2021 version

[rv1974]

@designerbursa I took a closer look.. your version is indeed more advanced and user friendly, many thanks!
P.S. you can cut and paste in place multiple and un-glued components in any SU version to get the same positive result, but your script is less laborious indeed.

[designerbursa]

module Reglue
    extend self

    # Menü öğesinin eklenme konumunu belirleyen değişken
    SUPPORT_MENU_POSITION ||= Sketchup::Menu.instance_method(:add_item).arity != 1 ? 8 : nil

    def glue_components_to_faces
      model = Sketchup.active_model
      selection = model.selection

      if selection.empty?
        UI.messagebox("Hata: Hiçbir seçim yapılmadı!")
        return
      end

      faces = selection.grep(Sketchup::Face)
      components = selection.grep(Sketchup::ComponentInstance).select { |comp| comp.glued_to.nil? }

      if faces.empty? || components.empty?
        UI.messagebox("Hata: Lütfen hem yüzeyleri hem de yapıştırılabilir bileşenleri seçin!")
        return
      end

      model.start_operation("Bileşenleri Yüzeylere Yeniden Yapıştır", true)

      components.each do |component|
        closest_face = find_closest_aligned_face(component, faces)
        component.glued_to = closest_face if closest_face
      end

      model.commit_operation
    end

    def find_closest_aligned_face(component, faces)
      component_normal = component.transformation.zaxis
      faces.min_by { |face| face.normal.angle_between(component_normal) }
    end

    unless @loaded
      UI.add_context_menu_handler do |menu|
        selection = Sketchup.active_model.selection
        next if selection.empty?

        has_faces = selection.any? { |entity| entity.is_a?(Sketchup::Face) }
        has_glueable_components = selection.any? { |entity| entity.is_a?(Sketchup::ComponentInstance) && entity.glued_to.nil? }

        if has_faces && has_glueable_components
          position = SUPPORT_MENU_POSITION
          menu.add_item("Reglue", position) { glue_components_to_faces }
        end
      end

      @loaded = true
    end
end