Sand Box and Road Curbs
-
Im a trying to add curbs on a roadway. is there a way that i can basically drop my road 6" so there will be a hard corner for a curb?
-
There probably is but without some picture for reference it's hard to suggest the best method. Does the road slope?
-
This is the road. I want to drop it 6" consistently on the model but follow the slopes
-
The JointPushPull plugin:
http://forums.sketchucation.com/viewtopic.php?t=6708Use the ector PushPull mode to PP along the Z axis.
Note that your roads must be properly draped first (i.e. you will need to be able to separately select the road surface). Also, with a difficult mesh, the operation may take a while so be patient. -
one method I have used for this is to copy the whole terrain down by the height of your curb then to create a block from the extrusion of your roads and intersect it with the whole model. after that clean up the model and you will have curbs and roads at a lower level than sidewalks. there is some work involved in it but it works.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Advertisement