[Plugin][$] Curviloft 2.0a - 31 Mar 24 (Loft & Skinning)

fredo6

My scripts run on SU13.

Just upgrade to the latest versions, in particular LibFredo6 5.2.

Fredo

nfr_ib

Thanks! Just got around to it today. Appreciate all the work you put in with SketchUp!

du_pmm

Hi, I work with "curviloft" and "round corner" plugins every day in my office, using sketchup 8. Yesterday, in my office, I tried to install these both plugins and it worked normally after Sketchup 2013 was installed. But today, I tried to install these plugins with Sketchup 2013 in my personal computer and it simply doesn't work! It appears a messsage on the screen saying "Module Curviloft requires Sketchup version greather than 6, Current version is 13.0.3689" So, why does it work normally yesterday in my computer's office, and it doesn't work in my personal computer? What should I do?

fredo6

@du_pmm said:

It appears a messsage on the screen saying "Module Curviloft requires Sketchup version greather than 6, Current version is 13.0.3689" So, why does it work normally yesterday in my computer's office, and it doesn't work in my personal computer? What should I do?

Just upgrade to the latest versions of the scripts (in particular LibFredo6 5.2).
Indeed, it is strongly recommended you install first the Plugin Store tool and then autoinstall my plugins with the tool.

Fredo

antonio555

The Greatest Extension! Thank You!

du_pmm

Tahnk you!

antonio555

Hi. I use Curviloft 1.2 d. It works good, but I see the error every time, when I start work in my ScetchUp 8.

Error Loading File bootstrap_Curviloft.rb
uninitialized constant Curviloft::T6Error Loading File CurviloftAlgo.rb
uninitialized constant Curviloft::T6Error Loading File CurviloftCurveMover.rb
uninitialized constant Curviloft::T6Error Loading File CurviloftPalette.rb
uninitialized constant Curviloft::T6Error Loading File CurviloftTool.rb
uninitialized constant Curviloft::T6

How can I improve this?
Thank You.

fredo6

You seem to have a wrong instalation of LibFredo6.

Please check the posts and respect the footprint, or better, install the SCF Plugin Store and then autoinstall the scripts with it.

Fredo

Missy_X

Not sure if this is expected behavior but i fired up Sketchup earlier, it told me there were updates for a couple plugins (libfredo, curviloft, round corners, ...) , i used Sketchucation Plugin Store inside Sketchup to update the plugins and now Curviloft shows a progress bar in the middle of my screen whenever i use it, and it stays there until i submit, which is very annoying. Is it supposed to be like that now ?

fredo6

@missy_x said:

Not sure if this is expected behavior but i fired up Sketchup earlier, it told me there were updates for a couple plugins (libfredo, curviloft, round corners, ...) , i used Sketchucation Plugin Store inside Sketchup to update the plugins and now Curviloft shows a progress bar in the middle of my screen whenever i use it, and it stays there until i submit, which is very annoying. Is it supposed to be like that now ?

There may be a bug.
Could you open the Ruby Console before launching and check if there are messages.

Thanks

Fredo

Missy_X

@fredo6 said:

There may be a bug.
Could you open the Ruby Console before launching and check if there are messages.

Thanks

Fredo

Very strange, works like a charm now Maybe that's what i get for not giving Sketchup some love for 2 weeks Thank you anyway and i'll check the ruby console if it ever does it again

tk22

great plugin fredo...thanks..

but i have a problem. why it works in SU8 but it always crash in SU7 ?

iheartpi

Awesome plugin! You know what I am thinking. I'll draw lines on my friends face, take a snapshot, using the snapshot as reference draw the lines in sketchup, then curviloft it

uniflipp

@antonio555 said:

Hi. I use Curviloft 1.2 d. It works good, but I see the error every time, when I start work in my ScetchUp 8.

Error Loading File bootstrap_Curviloft.rb
uninitialized constant Curviloft::T6Error Loading File CurviloftAlgo.rb
uninitialized constant Curviloft::T6Error Loading File CurviloftCurveMover.rb
uninitialized constant Curviloft::T6Error Loading File CurviloftPalette.rb
uninitialized constant Curviloft::T6Error Loading File CurviloftTool.rb
uninitialized constant Curviloft::T6

How can I improve this?
Thank You.

Be sure to extract the folder CURVILOFT_Dir_12 into the plugins folder. I extracted the *.rb files straight into plugins at first and got the same errors.

woodmaster2013

I just install curviloft plug in and I cant see in my sketchup window. Any comments please? im a newbie here. Thank you admin ...

Mvmcneil

I am testing a lofting workflow on simple geometry and Sketchup keeps crashing when trying to loft simple lines.

The process is this:
Draw a line
copy 4 times some distance
move 3 lines vertically up some to distance
select each line in sequence left to right
run curviloft

The tool activates then hangs sketchup. If I loft arcs or other shapes it seems to work fine.

I am using Sketchup 8 and Sketchup2013 on OSX 10.8.5. Both seem to be affected.

Thanks,

Mike

cotty

@woodmaster2013 said:

I just install curviloft plug in and I cant see in my sketchup window. Any comments please? im a newbie here. Thank you admin ...

Some more infos woudl help us to help you (how did you install it, ...)

@unknownuser said:

select each line in sequence left to right
run curviloft

Try it the other way round: run curviloft and afterwards, select the lines in the right order.

Dave R

@woodmaster2013 said:

I just install curviloft plug in and I cant see in my sketchup window. Any comments please? im a newbie here. Thank you admin ...

As cotty says, more information would be useful. I expect you've not installed it correctly and/or you didn't bother to install the required LibFredo6 files.

Dave R

@unknownuser said:

I am testing a lofting workflow on simple geometry and Sketchup keeps crashing when trying to loft simple lines.

The process is this:
Draw a line
copy 4 times some distance
move 3 lines vertically up some to distance
select each line in sequence left to right
run curviloft

The tool activates then hangs sketchup. If I loft arcs or other shapes it seems to work fine.

I am using Sketchup 8 and Sketchup2013 on OSX 10.8.5. Both seem to be affected.

Thanks,

Mike

How about posting an example SKP file of what you tried to describe?

Mvmcneil

@dave r said:

@unknownuser said:

I am testing a lofting workflow on simple geometry and Sketchup keeps crashing when trying to loft simple lines.

The process is this:
Draw a line
copy 4 times some distance
move 3 lines vertically up some to distance
select each line in sequence left to right
run curviloft

The tool activates then hangs sketchup. If I loft arcs or other shapes it seems to work fine.

I am using Sketchup 8 and Sketchup2013 on OSX 10.8.5. Both seem to be affected.

Thanks,

Mike

How about posting an example SKP file of what you tried to describe?

The file is not complicated is it only 5 lines and nothing more and it is a fresh file just after Sketchup starts. This is created in Sketchup 8.

I did try as Cotty suggested above to run Curviloft then select the lines. It worked and didn't crash Sketchup, but other geometry seems to work without running Curviloft first.

Mike.

lines-test.skp