[Plugin] Shape Bender Beta
-
I cannot make shape bender to work. I tried a very simple test: a straight line, a grouped box and a curve. I selected the box and am prompted to select the line but I click on it with SB's cursor and nothing happens, no matter how many times I click on it. the same message keeps coming up for me to select the straight line first!
-
I solved that little problem: there was something at the tip of the straight line that preveted SB from recognizing it as a line. fine.
HOWEVER, having gone through the steps, as soon as I hit enter SU crashes every time. and I am not trying any complex operation, just to bend a simple box.
-
Edson,
Have you successfully run SB before? Have you tried closing and restarting SketchUp/opening the model after fixing your line problem?
-
@edson said:
I solved that little problem: there was something at the tip of the straight line that prevented SB from recognizing it as a line. Fine.
HOWEVER, having gone through the steps, as soon as I hit enter SU crashes every time. and I am not trying any complex operation, just to bend a simple box.The line on the red axis must be a single axial line with nothing touching it - as just have discovered.
What size are these things, if they are very small [or enormously gigantic] SUp/OpenGL can't cope.
I think the Entity info says ~382 cm ? Which I would expect to be absolutely fine, BUT have you tried scaling x10 ?
I'm on PC and have no problems with a similar sized thing ~1m high/3m long...
-
@dave r said:
Edson,
Have you successfully run SB before? Have you tried closing and restarting SketchUp/opening the model after fixing your line problem?
dave,
I had never tried it before. yes, i tried restarting SU several times. it keeps crashing.TIG,
I tried SB on a clean 7.1 install, that is, with no other plugins than the ones that ship with SU. it worked fine which leads me to believe thet either there is a conflict with some of the 200+ plugins I have installed on SU8 or some incompatibity with SU8 for mac itself. but my successful attempt with 7.1 was not without hitches: see what happened to one of the ends of the box that was bent.
-
I suppose there could be a conflict. I imagine you know what to do to sort it out so I won't go into that.
That end isn't bent. the edge/s is/are just softened. Unsoften them and it'll look right. The plugin frequently does that. I don't know if there's a script fix but it isn't that hard to rectify manually.
-
If you run it with the Ruby Console open are there any error messages at all ?
-
@dave r said:
I suppose there could be a conflict. I imagine you know what to do to sort it out so I won't go into that.
That end isn't bent. the edge/s is/are just softened. Unsoften them and it'll look right. The plugin frequently does that. I don't know if there's a script fix but it isn't that hard to rectify manually.
how does one do that? I selected the geometry and ran the slider from one side to the other but nothing happened.
-
@tig said:
If you run it with the Ruby Console open are there any error messages at all ?
no messages at all (see below). the odd thing is that the problem occurs only when the group is exactly above the straight line. if I move the group ahead the problem does not occur.
-
@edson said:
@dave r said:
I suppose there could be a conflict. I imagine you know what to do to sort it out so I won't go into that.
That end isn't bent. the edge/s is/are just softened. Unsoften them and it'll look right. The plugin frequently does that. I don't know if there's a script fix but it isn't that hard to rectify manually.
how does one do that? I selected the geometry and ran the slider from one side to the other but nothing happened.
I select the softened edges (View>Hidden Geometry) and then set the slider to 20 where it normally is by default. In the lower of your screen shots, there's a softened edge at the bottom to take care of.
-
i have same problem
i guess its about the default setting values of edge -
@howardhong said:
i have same problem
i guess its about the default setting values of edgeWhat do you mean by "default setting values of edge"?
-
dave, i said "i guess..".
when im using erase tool, i saw a sudden pop up window in the center of screen.
i didnt give any attension, and closed that window.
after that happened, i got same problem.so i said "i guess..".
-
The only possible edge setting would have to do with Smooth/Soften but it won't open when you are using the Eraser tool. What did the pop up box say?
-
i cant remember it exactly,
theres three scrool down menu and one of it said "sketchup model" or somewhat... -
I guess, if I were you, I would wait until it shows up again and note what it says. Then report back. If you can make a screen shot showing it, that would be very useful.
-
@dave r said:
I select the softened edges (View>Hidden Geometry) and then set the slider to 20 where it normally is by default. In the lower of your screen shots, there's a softened edge at the bottom to take care of.
dave,
I followed your advice and it worked. thanks. never had this problem before.
-
I selected my group and clicked the shape bender icon, i click on the straight line than the curved line, and it gives an error telling me to select the group before clicking the shape bender icon
wath is the problem? i did everything like you did in the video and it wont work
also, how can i make those really soft curved lines?
I'am not new to sketchup or somthing, but i never had problems using plugins.
-
It would be a big help if you either post the SKP file or at least a screen shot.
-
just to let you know that the crashing SU8 when running Shape Bender was due to the fact that I was running an outdated version of HOlePunchTool (1.6). as soon as I updated it the crashes stopped.
Advertisement