[Plugin][$] FredoScale - v3.6a - 01 Apr 24
-
Scale to Target imposes to have the origin in a valid area. For some reasons, I have put the a tolerance of about 10% due to problems I have found, which I don't remember very well).
In your cases, why do you want to use the Scale to Target mode, not the regular mode?
Fredo
-
Well, I need the corner of the bottom edge of the shape (the arch, in my case) to touch a line.
Of course I could measure the ratio by hand, but it won't give accurate enough results so that the corner is exactly on the line. That's why I was hoping this tool would do it for me. When I tried the scale tool in normal mode, it does not snap correctly to the other edge, even if I put a guide point or an endpoint there. The little yellow box does snap to an endpoint, but it doesn't correlate with behavior of the scale tool, ie. it ignores the snap target completely and scales in freeform.
-
@icchan said:
Well, I need the corner of the bottom edge of the shape (the arch, in my case) to touch a line.
if that's an arc (as in, SU will say it's an arc in entity info), then just use the move tool
don't select the arc first.. just place the move tool cursor on the end of the arc, click and move it to the end..
if it's an arc, it will scale accordingly.[actually, that should work with polylines or welded lines as well]
[edit] yeah, forget the bit about it needing to be an arc..
-
Thanks for the tip, it does work as I needed with arcs, but the problem remains for rectangles or other non-regular shapes.
-
@icchan said:
Thanks for the tip, it does work as I needed with arcs, but the problem remains for rectangles or other non-regular shapes.
You can do it with rectangles and odd shapes as well but it requires a little setup. There's another way to do this with a rectangle too.
I'm on a phone right now but when I get back to the hotel tonight, I'll post a little tutorial. -
if you weld the segments into a polyline, the scaling with the move tool will work..
with the rectangle, you weld 3 sides and leave the bottom untouched.. after scaling, select the 3 welded lines and explode if you wish..i also included an alternate method using guide lines to create an intersection which the scale tool will snap to..
[i use jim's cline tool for the diagonal]
http://sketchuptips.blogspot.com/2008/02/plugin-construction-line-tool.html[flash=800,475:m8lhsjxs]http://www.youtube.com/v/4Zx7dt58v7w?fs=1&hl=en_US&rel=0&hd=1&color1=0x2b405b&color2=0x6b8ab6[/flash:m8lhsjxs]
-
Wow... I was at most expecting an explanation for the tool behavior, was not definitely expecting a detailed tutorial! Excellent job, I hope others with similar problems will find this also. Thanks!
-
Getting this error now when I open SketchUp.
I thought I updated a bunch of Plugins... apparently something went wrong.
-
@bmike said:
Getting this error now when I open SketchUp.
I thought I updated a bunch of Plugins... apparently something went wrong.I think it is not compatible with sketchup 8 yet. Is there a FredoScale for Skup8?
please update.... I looooooove this tool -
It's working with SU8.
Have you ensure you have installed the files correctly? -
I got it working now. it is WORKING with skup8. its confirmed. i just miss-copied a folder previously, thats all. (stuipd me
) -
fixed. cleaned up my plugins folder and went back / downloaded / reinstalled all relevant files.
loading now, and toolbars popped up.
will test later when i get into a model. -
stretching with orientation of scaling box
small error.
does not work "stretching with orientation of scaling box", with arcs and polylines
possible, correct this error?
-
You could temporarily add another line between the arc's ends to form a face then scale the lot then erase the temporary line on completion...
-
hi tig. Yes, I thought the same, but does not work
-
Arcs and Curves applies constraints on transformations unless they are exploded.
-
So Explode them, Scale and then re-Weld into Curves ?
-
@thomthom said:
Arcs and Curves applies constraints on transformations unless they are exploded.
yes?
is strange that all fredoscale tools work well with arc and polylines.
no need to exploit the arcs and polylines -
@diego-rodriguez said:
stretching with orientation of scaling box
small error.
does not work "stretching with orientation of scaling box", with arcs and polylines[attachment=0:lcmr75ft]<!-- ia0 -->Untitled.gif<!-- ia0 -->[/attachment:lcmr75ft]
possible, correct this error?
Diego,
As mentioned in the Doc, FredoScale does not stretch the SU curves. That's just a design choice, because SU does not stretch curves and I would have had to explode the curve, strech the edges and then reconstruct the curves (thios would have been destructive and probably not possible for an interactive visual deformation). It stretches normally if the curve if exploded.
Fredo
-
thank you all for the explanation
Advertisement