Profile Builder released!

haynesc

I have a problem ...

why is the profile at an angle ?

Whaat

I have a problem ...

why is the profile at an angle ?

Strange...this should not occur if the profile was created from the face that is shown in your screenshot. Is it possible that you modified your axis?? Right click on the axis and choose reset. Then, try to make the profile again.

Is this problem repeatable?

peweuk

I just replicated what you appear to show in your image, and this is the result

Maybe there is something different about the angle that the face used to create the profile was created relative to the X and Y axis?

Make sure the face sides are parallel to the X, Y axis before your select the option to make the profile.

Whaat

@utiler said:

Thanks Dale, I'm having heaps of fun with this....

One questions: when creating a closed profile member, picking the point where you started doesn;t merge the profile. [see attached] I understand I could do it 'building along a predefined path' but seems it appears to be the long way around....
Thanks in advance.

Refer to the troubleshooting section of the manual. My only suggestion is to try using a bottom-left or bottom-right placement point with no offset. I know that this might not be the ideal location of the origin but in some cases, it is the only way to create a closed loop. I am meaning to report this as a possible SketchUp bug because this occurs far less frequent when using the standard follow-me tool, even though Profile Builder uses the follow-me method from the SketchUp API.

Whaat

@utiler said:

Thanks Dale, I'm having heaps of fun with this....

One questions: when creating a closed profile member, picking the point where you started doesn;t merge the profile. [see attached] I understand I could do it 'building along a predefined path' but seems it appears to be the long way around....
Thanks in advance.

Refer to the troubleshooting section of the manual. My only suggestion is to try using a bottom-left or bottom-right placement point with no offset. I know that this might not be the ideal location of the origin but in some cases, it is the only way to create a closed loop (i.e. placement point at corner of profile). I am meaning to report this as a possible SketchUp bug because this occurs far less frequent when using the standard follow-me tool, even though Profile Builder uses the follow-me method from the SketchUp API.

Whaat

@seasdes said:

Thanks for the plugin. Can I explain to a simpleton how I can have the walls intersect and mitre correctly when the the walls are created separately.

Walter

If you have two walls that are in separate groups and you want to intersect or mitre them, you could try doing a 'union' operation with BoolTools http://www.smustard.com/script/BoolTools.

I am not sure how else to do it (there is no function in ProfileBuilder do this). Maybe someone else could suggest an alternative method...

Whaat

@unknownuser said:

When you assign Mark numbers - ie a Prefix or Suffix eg #1,
I was expecting the original Group Name to still remain - is this deliberate or a bug ???
eg Original Group Name = UB_152x89x16
After applying Mark (Suffix) I would expect to see:
UB_152x89x16#1, UB_152x89x16#2, UB_152x89x16#3 etc
What I get is #1, #2, #3 etc
Could you please take a look at this if you get time as this feature will be so useful.
(Make original group name remain by default - unless users actually DO want to get rid of it).

Check the manual. To keep the profile name in the group name, use '$P' in the suffix or prefix.

@unknownuser said:

Something for you to ponder:
I have folders containing many profiles. One skp file = One Profile. I'm sure I'm not alone.
(eg Steel Sections).
Traditionally, this would be imported into a skp file (it would now be a component) and then extruded manually. Profile Builder gives us the ability to do our extruding a bit smarter and quicker than this - Halleluljah !!!.

My request is, could you either:

a. Add in a feature to import profiles from a directory THAT ARE INDIVIDUAL *.skp files into a Profile Library (profiles retaining their skp filenames minus the *.skp file extension ie UB_123_567.skp = UB_123_567 in profile library OR
b. A feature so that these profiles can be utilised directly (ie without importing them).

Do you know that I have steel section libraries already created and ready for download on the Smustard website? As for your suggestion, it is a good idea for the next version. I will consider it. Thanks!

BTW, I intend to create more free downloadable profile libraries based on user requests. There are also ways to create to Profile Libraries from an Excel spreadsheet. I hope to create a tutorial for this someday. If you take a look at the file format for the PLB files, you can probably figure it out. The format is 'NAME x1 y1 x2 y2 x3 y3 ....'

david_h

Thanks Whaat. I am sure there is a Knighthood in this for you.

David

dtrarch

Dale
You said

BTW, I intend to create more free downloadable profile libraries based on user requests. There are also ways to create to Profile Libraries from an Excel spreadsheet. I hope to create a tutorial for this someday. If you take a look at the file format for the PLB files, you can probably figure it out. The format is 'NAME x1 y1 x2 y2 x3 y3 ....'<

Please explain how to format for spread sheet (CSV ?) and also how to convert the spread sheet to a vector graphic of each profile.

We all would like to share libraries and just need a little help to set them up and edit outside of PB.

Thank you

dtr

haynesc

problem fixed, my axis were incorrect ...

utiler

@utiler said:

Another few things:

the "build" icon sit right over the cursor which makes it difficult to snap to points... in your video you used the standard cursor which was a little easier, can you look at this?

the X and Y offset values don't seem to be saved with the profile. I think this is imperative that they are. When you chose another library and or profile the offset values stay the same as the previous profile which means working it out for each one. For simple profiles, sure it's easy but complex profiles this is very tedious....

Dale, any comment on these issues...?

utiler

Just wondering if you guys see this suggestion for enhancing PB worthwhile:

I'd like to see Profiles not just be restricted to faces but also 'profiles' as well. Not all modeling needs a thickness [eg: wall and roof sheeting / purlins / gutters] Would be great to be able to create a profile out of a polyline and build a path, pre-defined or as you go...

Also, a thinking a little beyond PB. Dale has obviously bought us some scripts of late that are like no other; they're more 'activities' rather than functions within SU. I think Dale is not far from bringing us a complete set of 'activities' specific to individual industries. Eg: I'm in the architectural field; I'd like to see building components targeted such as windows, doors, stairs and roofs. As we all know we are yet to work out how to cut two planes with SU to make windows and doors easy to handle. It seems if Dale's Booltools were integrated with a script to create windows and doors, we shouldn't be far from getting it right!!!
These additions along with TIG's "roof" script would almost complete SU for me. What are your thoughts?

david_h

I tried to use a profile to make a picture frame and it wouldn't close (miter) properly at the end as it would do with just the normal follow-me? What am I doing wrong?

David

utiler

David, try setting the offset to zero and starting from the bottom left or bottom right location. I found this to happen also but seems to close only when using these placement points....which renders the offset options a little useless really.

kagrani

I had the same problem when I started playing with PB yesterday, but I think I stumbled upon a fix: just continue the path around/past the 4th corner as well, and it will miter correctly. And I couldn't find excessive geometry afterwards.

Can anyone confirm?

Knut

plot-paris

I think that is because PB relies on SketchUp functions to draw the members. so the actual problem doesn't lie with ProfileBuilder, but with SketchUp. it works indeed better, if the offset is set to one corner of the profile (can be quite difficult to determine, when you have a complicated profile, of course).
but I think Whaat has covered all this in his superb manual

thomthom

Would it be possible to make the script set focus to the SU window after you click the Build tool button? I find that I often want to start at a location on another profile's path, but in order to do that I need to enable the PMPI. When I click the build button I have to first set focus to the SU window before I can begin. It's something that I do often so it'd be very nice if the plugin would do this automatically.

Also: Hotkeys for each of the buttons in the PB window? Pleeeease? I'm a hotkey addict.

utiler

Thomas, why don't you make your own hotkeys to suit?

thomthom

I can't. When you go to the SU preferences for hotkeys it doesn't the commands.

And I did mean that I wanted to be able to set my own and not hard coded hotkeys. Might not been clear.

david_h

@unknownuser said:

but I think Whaat has covered all this in his superb manual

You mean I have to read something?

Thanks for the input!