sketchucation logo sketchucation
    • Login
    ℹ️ Licensed Extensions | FredoBatch, ElevationProfile, FredoSketch, LayOps, MatSim and Pic2Shape will require license from Sept 1st More Info

    Medeek Wall Plugin

    Scheduled Pinned Locked Moved Plugins
    1.5k Posts 27 Posters 991.0k Views 26 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • medeekM Offline
      medeek
      last edited by

      First look at exterior trim with trapezoid windows:

      https://aws1.discourse-cdn.com/sketchup/original/3X/8/8/8843f3ca150afc0747fa07550739d5ac5490a9d1.jpeg

      The good news is that the various window modules (eg. window installation, trim, casing etc...) are independent of the wall type so enabling trapezoid windows for the various gable wall types should now proceed relatively quickly.

      Nathaniel P. Wilkerson PE
      Medeek Engineering Inc
      design.medeek.com

      1 Reply Last reply Reply Quote 0
      • medeekM Offline
        medeek
        last edited by

        First look at interior casing with trapezoid windows (Style A, B, and C):

        https://aws1.discourse-cdn.com/sketchup/original/3X/1/f/1fcc6862632b2972e43def21cd40715adce5a1b9.jpeg

        https://aws1.discourse-cdn.com/sketchup/original/3X/6/6/6642a9dba5d1d78943c6a91496a42541958a2a0d.jpeg

        Nathaniel P. Wilkerson PE
        Medeek Engineering Inc
        design.medeek.com

        1 Reply Last reply Reply Quote 0
        • medeekM Offline
          medeek
          last edited by

          First look at trapezoid windows within a gable wall:

          https://aws1.discourse-cdn.com/sketchup/original/3X/e/5/e5d05eeb5b4eeecc9049a5433845618c8b90c28e.jpeg

          https://aws1.discourse-cdn.com/sketchup/original/3X/e/7/e7e46f289d9e0fa679fd63db8b069ae7737d6e41.jpeg

          Notice how the right most window has it's header pushed up against the top plate (no cripples or insulation installed). To achieve this one must adjust the header height until it is at the correct height since "Raised" headers are not currrently enabled for gable, shed or hip walls.

          Nathaniel P. Wilkerson PE
          Medeek Engineering Inc
          design.medeek.com

          1 Reply Last reply Reply Quote 0
          • medeekM Offline
            medeek
            last edited by

            Version 2.0.6 - 04.29.2021

            • Added trapezoid windows to the window draw and edit menus for all wall types: rectangular, gable, shed and hip.

            http://design.medeek.com/resources/wallplugin/images/wall_su522_800.jpg

            Nathaniel P. Wilkerson PE
            Medeek Engineering Inc
            design.medeek.com

            1 Reply Last reply Reply Quote 0
            • medeekM Offline
              medeek
              last edited by

              Version 2.0.6b - 04.29.2021

              • Added triangle windows to the window draw and edit menus for all wall types: rectangular, gable, shed and hip.
              • Added the "Total Window Height" callout to the trapezoid window's section of the window draw and edit menus.

              http://design.medeek.com/resources/wallplugin/images/wall_su524_800.jpg

              http://design.medeek.com/resources/wallplugin/images/wall_su525_800.jpg

              http://design.medeek.com/resources/wallplugin/images/wall_su526_800.jpg

              http://design.medeek.com/resources/wallplugin/images/wall_su534_800.jpg

              Nathaniel P. Wilkerson PE
              Medeek Engineering Inc
              design.medeek.com

              1 Reply Last reply Reply Quote 0
              • medeekM Offline
                medeek
                last edited by

                Version 2.0.6b - 04.29.2021

                • Added triangle windows to the window draw and edit menus for all wall types: rectangular, gable, shed and hip.
                • Added the "Total Window Height" callout to the trapezoid window's section of the window draw and edit menus.

                http://design.medeek.com/resources/wallplugin/images/wall_su524_800.jpg

                http://design.medeek.com/resources/wallplugin/images/wall_su525_800.jpg

                http://design.medeek.com/resources/wallplugin/images/wall_su526_800.jpg

                http://design.medeek.com/resources/wallplugin/images/wall_su523_800.jpg

                Nathaniel P. Wilkerson PE
                Medeek Engineering Inc
                design.medeek.com

                1 Reply Last reply Reply Quote 0
                • medeekM Offline
                  medeek
                  last edited by

                  Version 2.0.6c - 04.30.2021

                  • Fixed a critical bug with the shutter module.

                  ******* CRITICAL FIX *******
                  If you downloaded and installed Version 2.0.6b then you will want to immediately uninstall and download Version 2.0.6c. The previous version introduced a minor bug to the shutter module which will causes errors with any windows that have shutters. Installation of Version 2.0.6c is highly recommended.

                  Nathaniel P. Wilkerson PE
                  Medeek Engineering Inc
                  design.medeek.com

                  1 Reply Last reply Reply Quote 0
                  • medeekM Offline
                    medeek
                    last edited by

                    I am very excited with the solid progress made on the Wall plugin these last few weeks and months, especially with the recent addition of both trapezoid and triangular windows. In light of the recent progress and in hopes of allowing more users access to the features of the plugins I will be immediately offering 40% off of the mdkBIM bundle price using the coupon codeMOTHERSDAY21. (May 1, 2021 thru May 10, 2021).

                    This will reduce the bundle price from $170.00 USD to $102.00 USD. This promo code does not apply to any of the extensions purchased separately or to the electrical plugin. The offer ends on May 10th and no rain checks will issued thereafter.

                    http://design.medeek.com/ads/MOTHERSDAY21_BANNER_800.jpg

                    Nathaniel P. Wilkerson PE
                    Medeek Engineering Inc
                    design.medeek.com

                    1 Reply Last reply Reply Quote 0
                    • medeekM Offline
                      medeek
                      last edited by

                      Version 2.0.7 - 05.01.2021

                      • Fixed a bug with the tee intersection gypsum cutout algorithm for shed walls.

                      http://design.medeek.com/resources/wallplugin/images/wall_su527_800.jpg

                      A similar fix will probably be required for gable and hips walls but I haven't dug into that section of the code just yet.

                      Nathaniel P. Wilkerson PE
                      Medeek Engineering Inc
                      design.medeek.com

                      1 Reply Last reply Reply Quote 0
                      • medeekM Offline
                        medeek
                        last edited by

                        Version 2.0.7b - 05.01.2021

                        • Fixed a bug with the tee intersection gypsum cutout algorithm for gable and hip walls.

                        Nathaniel P. Wilkerson PE
                        Medeek Engineering Inc
                        design.medeek.com

                        1 Reply Last reply Reply Quote 0
                        • medeekM Offline
                          medeek
                          last edited by

                          Here is an interesting framing situation. You have two internal walls that tee into a wall which has a pocket door that bisects the tee:

                          https://aws1.discourse-cdn.com/sketchup/original/3X/d/c/dc68eb13e7f0091900a65f5d36253a119f51a479.jpeg

                          Overall no major problems the three walls can be configured correctly with "tee" intersections and the offset can be set to 1.75" for the two tee walls so that they meet properly at the top plate.

                          The only issue is the that the gypsum backer studs are drawn full length and should be truncated at the header (hence the clash). The offending gypsum backer is colored red in the screenshot.

                          The manual work around is to use the Trim Tool (Medeek Truss) and quickly trim the gypsum backers. I will have to examine this situation further and see if some additional logic can remedy this clash. This is not a huge deal breaker/ hot item in my opinion but it is a special framing case that needs a second look.

                          The other obvious (simple) solution is to turn off the tee intersection backers in the global settings but this is really not a good option since it will disable the gypsum backers for all the walls in the model, not just this one.

                          View model here:

                          Link Preview Image
                          3D Warehouse

                          3D Warehouse is a website of searchable, pre-made 3D models that works seamlessly with SketchUp.

                          favicon

                          (3dwarehouse.sketchup.com)

                          Nathaniel P. Wilkerson PE
                          Medeek Engineering Inc
                          design.medeek.com

                          1 Reply Last reply Reply Quote 0
                          • medeekM Offline
                            medeek
                            last edited by

                            First look at "Pentagon" windows:

                            https://aws1.discourse-cdn.com/sketchup/original/3X/6/b/6bd497e09085ab60b6274b9a2244ed99c2c79751.jpeg

                            Note that if one sets the window height to zero you can also achieve an isosceles or equilateral triangle window (the degenerate cases).

                            Since I'm fresh on windows right now I thought that it might be the opportune time to add in the pentagon picture window as well, one less monkey on my back. The only other significant window missing is probably the quarter circle.

                            Nathaniel P. Wilkerson PE
                            Medeek Engineering Inc
                            design.medeek.com

                            1 Reply Last reply Reply Quote 0
                            • medeekM Offline
                              medeek
                              last edited by

                              Pentagon window with "Perimeter" style grill:

                              https://aws1.discourse-cdn.com/sketchup/optimized/3X/f/3/f30fd874b1d23d5d273da5ff5336c9350284d5fd_2_690x396.jpeg

                              Nathaniel P. Wilkerson PE
                              Medeek Engineering Inc
                              design.medeek.com

                              1 Reply Last reply Reply Quote 0
                              • medeekM Offline
                                medeek
                                last edited by

                                First look at exterior trim with a Pentagon window:

                                https://aws1.discourse-cdn.com/sketchup/original/3X/1/5/15e5f9516ad9cf074bb0dab085c8aeb18bdd9c92.jpeg

                                Nathaniel P. Wilkerson PE
                                Medeek Engineering Inc
                                design.medeek.com

                                1 Reply Last reply Reply Quote 0
                                • medeekM Offline
                                  medeek
                                  last edited by

                                  First look at pentagon windows with the various casing options:

                                  https://aws1.discourse-cdn.com/sketchup/original/3X/8/f/8faa924f666154f3665db8c66c1fb89e6b7d80d2.jpeg

                                  Nathaniel P. Wilkerson PE
                                  Medeek Engineering Inc
                                  design.medeek.com

                                  1 Reply Last reply Reply Quote 0
                                  • medeekM Offline
                                    medeek
                                    last edited by

                                    First look at a gable wall with a combination of rectangular, trapezoid and pentagon windows:

                                    https://aws1.discourse-cdn.com/sketchup/original/3X/0/6/064fbbb315cc67374ecc6a740531ad816275d7b6.jpeg

                                    https://aws1.discourse-cdn.com/sketchup/original/3X/b/5/b53f59e34970f34239af920efdaa59ee32338f34.jpeg

                                    https://aws1.discourse-cdn.com/sketchup/original/3X/3/8/388ffbf9a5ed4c6fa179455742efe0e64b9c92cb.jpeg

                                    https://aws1.discourse-cdn.com/sketchup/original/3X/f/5/f5a8c75e6931185053c43957e02c85b82fe35c05.jpeg

                                    This type of gable wall would probably be used with a scissor truss set where the bottom pitch of the truss set aligns with the pitch/slope of the windows.

                                    View model here:

                                    Link Preview Image
                                    3D Warehouse

                                    3D Warehouse is a website of searchable, pre-made 3D models that works seamlessly with SketchUp.

                                    favicon

                                    (3dwarehouse.sketchup.com)

                                    Nathaniel P. Wilkerson PE
                                    Medeek Engineering Inc
                                    design.medeek.com

                                    1 Reply Last reply Reply Quote 0
                                    • medeekM Offline
                                      medeek
                                      last edited by

                                      Version 2.0.8 - 05.05.2021

                                      • Added pentagon windows to the window draw and edit menus for all wall types: rectangular, gable, shed and hip.
                                      • Added isoceles/equilateral triangle windows to the window draw and edit menus for all wall types: rectangular, gable, shed and hip.

                                      Nathaniel P. Wilkerson PE
                                      Medeek Engineering Inc
                                      design.medeek.com

                                      1 Reply Last reply Reply Quote 0
                                      • medeekM Offline
                                        medeek
                                        last edited by

                                        Version 2.0.8b - 05.06.2021

                                        • Fixed a bug with exterior trim and wainscoting for trapezoid and pentagon windows.

                                        http://design.medeek.com/resources/wallplugin/images/wall_su537_800.jpg

                                        ***** CRITICAL BUG FIX *****
                                        If you are using either trapezoid or pentagon windows with exterior trim or wainscoting this is a critical bug fix. It is highly recommended to upgrade to this latest release to address this issue.

                                        Nathaniel P. Wilkerson PE
                                        Medeek Engineering Inc
                                        design.medeek.com

                                        1 Reply Last reply Reply Quote 0
                                        • medeekM Offline
                                          medeek
                                          last edited by

                                          Tutorial 20 - Trapezoid and Pentagon Windows (16:59 min.)

                                          Nathaniel P. Wilkerson PE
                                          Medeek Engineering Inc
                                          design.medeek.com

                                          1 Reply Last reply Reply Quote 0
                                          • medeekM Offline
                                            medeek
                                            last edited by

                                            Version 2.0.8c - 05.06.2021

                                            • Minor update to the window draw and edit menus.
                                            • Customized the wireframe preview for the Trapezoid and Pentagon window geometry.

                                            Nathaniel P. Wilkerson PE
                                            Medeek Engineering Inc
                                            design.medeek.com

                                            1 Reply Last reply Reply Quote 0
                                            • 1
                                            • 2
                                            • 52
                                            • 53
                                            • 54
                                            • 55
                                            • 56
                                            • 73
                                            • 74
                                            • 54 / 74
                                            • First post
                                              Last post
                                            Buy SketchPlus
                                            Buy SUbD
                                            Buy WrapR
                                            Buy eBook
                                            Buy Modelur
                                            Buy Vertex Tools
                                            Buy SketchCuisine
                                            Buy FormFonts

                                            Advertisement