[Plugin][$] FredoSpline - v2.6a - 01 Apr 24

Arc · 30 Apr 2020, 02:34

Convert Curves Error.

Error; #<TypeError; no implicit conversion of nil into Hash>
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_fredospline/fredosplinetool.rbe;5847;in `update'
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_fredospline/fredosplinetool.rbe;5847;in `edge_picking_init'
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_fredospline/fredosplinetool.rbe;244;in `initialize'
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_fredospline/bootstrap_fredospline.rbe;291;in `new'
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_fredospline/bootstrap_fredospline.rbe;291;in `launch'
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_fredospline/bootstrap_fredospline.rbe;245;in `action__mapping'
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe;126;in `call'
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe;126;in `launch_action'
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe;224;in `launch_action'
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_fredospline/bootstrap_fredospline.rbe;118;in `launch_action'
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_fredospline/bootstrap_fredospline.rbe;183;in `block in declare_command'
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe;1321;in `command_invoke'
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe;1303;in `block (2 levels) in build_config_commands'
c;/users/xwtao/appdata/roaming/sketchup/sketchup 2019/sketchup/plugins/fredo6_!libfredo6/lib6traductor.rbe;1372;in `block in add_command'

fredo6 · 30 Apr 2020, 08:17

@Arc

Did you update to FredoSpline v1.2a?

The error lines seems outdated.

Fredo

Arc · 3 May 2020, 08:39

It is fixed, thank you.

reza1813 · 4 May 2020, 22:41

Dear Fredo,
Hello, is it any possibility to add Gumball to Fredospline like the Rhino? I know that we have it now in these plugins, but regarding the graphical concern, it would be great when we select the point, then we can see a Gumball on top of the point. Thanks.

fredo6 · 5 May 2020, 09:03

@reza1813 said:

Dear Fredo,
Hello, is it any possibility to add Gumball to Fredospline like the Rhino? I know that we have it now in these plugins, but regarding the graphical concern, it would be great when we select the point, then we can see a Gumball on top of the point. Thanks.

You have the direction inferences on axes (global and local), you can also lock any direction. And once the direction is locked or inferred, you can type a distance.

The interest of the gumball (as I see it in the other software) is that you can select several control points (via a selection rectangle) and move them together.

Pixero · 6 May 2020, 09:11

I have always wanted a bezier tool in SketchUp that behaves like in 2D vector programs such as Freehand or Affinity Designer.

Here is an old little test I did with paperjs where I made a simple drawing tool in the browser.
Click to create straight lines. Click and hold and drag to create smooth corners.
What I like is the control and the preview of the next curve segment before you click to place it.
Close the curve to create a new curve.
(In this little test you can't go back and edit already made curves.)

555 Security Incident Detected

(pixero.com)

This is exactly like how it works in for example Freehand (Which in my humble opinion was a much better vector program than Illustrator before Adobe bought and killed it.)

Would it be possible with FredoSpline?

rv1974 · 6 May 2020, 13:03

@Pixero:
This is what I suggested: single click for Corner, click & drag for Bezier Smooth, Backspace for last input Undo. Rather standard cross platform behavior.

fredo6 · 25 May 2020, 10:46

NEW RELEASE: FredoSpline v1.3a - 25 May 20

Requirements

LibFredo6: v10.5a
Sketchup version: SU2017 and above

FredoSpline 1.3a is a maintenance release for bug fixing and cosmetic adjustments for Mac

Home Page of FredoSpline for information and Download.

Main post of this FredoSpline thread.

fredo6 · 1 Jun 2020, 06:57

NEW RELEASE: FredoSpline v1.4a - 01 Jun 20

Requirements

LibFredo6: v10.6a
Sketchup version: SU2017 and above

FredoSpline 1.4a is a maintenance release for bug fixing and cosmetic adjustments for Mac

Home Page of FredoSpline for information and Download.

Main post of this FredoSpline thread.

Gray Gardner · 16 Jun 2020, 21:14

File won't seem to install in my sketchup. "failed to install FredoSpline_v1.4a.rbz"

fredo6 · 20 Jun 2020, 06:38

@unknownuser said:

File won't seem to install in my sketchup. "failed to install FredoSpline_v1.4a.rbz"

Difficult to help without more information....

fredo6 · 19 Aug 2020, 20:16

NEW RELEASE: FredoSpline v1.5a - 19 Aug 20

Requirements

LibFredo6: v11.0a
Sketchup version: SU2017 and above

FredoSpline 1.5a is a maintenance release for cosmetic adjustments and extension of validity

Home Page of FredoSpline for information and Download.

Main post of this FredoSpline thread.

rv1974 · 6 Oct 2020, 10:16

Fredo, is Covert curves command able to alter radius of already existing fillets (in polycorner arc curve)? Or at least remove all fillets (= radius 0)?

fredo6 · 6 Oct 2020, 14:36

@rv1974 said:

Fredo, is Covert curves command able to alter radius of already existing fillets (in polycorner arc curve)? Or at least remove all fillets (= radius 0)?

If you wish to remove all fillets, then SWAP it to Polyline.

Remember the difference between Edit, Swap and Convert:

EDIT allows to change the parameters (as well as control points) of a single existing FredoSpline curve. Actually, you can also change the type.

SWAPchanges the type of an existing FredoSpline curve. The benefit of Swap is that you can preselect several curves
CONVERTis used to make a FredoSpline curve of a given type from one or several non-FredoSpline sequences of segments. Indeed, it also works with a FredoSpline curves; in which case, it would be equivalent to Swap.

rv1974 · 6 Oct 2020, 19:56

thank you for clarification, Swap function is divine as well as all toolset

Michelfad · 11 Oct 2020, 10:23

HOW TO UPDATE FOR THE LATEST VERSION

rv1974 · 21 Oct 2020, 09:09

Fredo, here is a small but important suggestion:
When editing* polycorner's fillets with mouse scrolling (or slider) it'd be great to have ability to snap to user defined rounding values (like 10\50\100 cm)
It could be implemented by continuously pressing one of modifier keys while scrolling
*- Usually people work with 2+ digits after point precision, and using mouse scroll\slider nowdelivers bad radius values.
Thank you for attention

fredo6 · 21 Oct 2020, 12:20

@rv1974 said:

Fredo, here is a small but important suggestion:
When editing* polycorner's fillets with mouse scrolling (or slider) it'd be great to have ability to snap to user defined rounding values (like 10\50\100 cm)
It could be implemented by continuously pressing one of modifier keys while scrolling
*- Usually people work with 2+ digits after point precision, and using mouse scroll\slider nowdelivers bad radius values.
Thank you for attention

Maybe I'll add an explicit configuration parameter, because there are issues with guessing the right increment:

imperial and other exotic units could be used
the order of magnitude is difficult to infer, as curves are drawn outside of context. You wish 10/50/100 cm, but another user may want 10/50/100 m)

rv1974 · 21 Oct 2020, 18:55

BTW For some reason Profile Builders assemblies don't like closed polyacrc curves- they need to be converted to regular polylines (or exploded) in order to be treated as paths

fredo6 · 22 Oct 2020, 18:43

@rv1974 said:

BTW For some reason Profile Builders assemblies don't like closed polyacrc curves- they need to be converted to regular polylines (or exploded) in order to be treated as paths

I don't have Profile Builder installed. This is strange, because FredoSpline generate geometry as true Sketchup curves, with some extra attributes. So, it should be transparent to Profile Builder.

The problem with closed curves is the start point of the curve, which may not be what you would visually expect.