[Plugin][$] RoundCorner - v3.4a - 31 Mar 24

fredo6 · 8 Sept 2017, 17:45

Est ce qu'il serait possible dans une futur mise a jour de prévoir des chanfreins avec 2 cotes différentes

Asymmetric rounding is indeed an interesting features, requested by very few users however. With the current approach of RoundCorner, would be a little bit difficult. So It will have to wait for a full refresh.

Fredo

countercharge · 27 Sept 2017, 18:02

Hi, sorry for the noob question but I've installed this plugin and even after reading the documentation I can't figure out how to use it. I don't see any way to bring up the interface after selecting the edge I want to round.. nothing in the toolbar, nothing in the menu. The plugin is enabled but I'm totally at a loss as to how to use it.

edit: nevermind, the interface showed up

fredo6 · 27 Sept 2017, 20:33

@countercharge said:

edit: nevermind, the interface showed up

Did you identify what was the problem (in case this happens to other users)?

Fredo

countercharge · 28 Sept 2017, 15:52

@fredo6 said:

@countercharge said:

edit: nevermind, the interface showed up

Did you identify what was the problem (in case this happens to other users)?

Fredo

I did not, but I think it appeared when I closed and re-opened sketchup. I assumed it would load once the plugin was loaded and enabled.

Loving it so far but I can't figure out how to round edges that are on the inside/interior of an object. If I try to do that, it covers the opening. I'm sure that's somewhere in this long thread.. any idea what page to look at?

fredo6 · 28 Sept 2017, 16:21

@countercharge said:

Loving it so far but I can't figure out how to round edges that are on the inside/interior of an object. If I try to do that, it covers the opening. I'm sure that's somewhere in this long thread.. any idea what page to look at?

Just erase the cover face(s). The rounding is underneath.

Fredo

fredo6 · 25 Oct 2017, 14:08

NEW RELEASE: RoundCorner v3.2e - 25 Oct 17

RoundCorner 3.2e is a maintenance release. It fixes a weird issue on French platforms, preventing the plugin to launch (in relation with decimal separator differences)..

Home Page of RoundCorner for information and Download.

Main post of this thread.

jtri · 11 Nov 2017, 21:34

I am working on knife and when I use the round over tool I loose faces. A copy of the handle is at 1000x as I wanted to show that scaling up does not fix the issue I have. My model is at the origin original size and it has a volume.
I have used this wonderful tool many times before but I seem to have developed this model in a way that is not compatible with the round over tool.
I used Cuviloft to skin if that is a factor. Also I welded all the perimeter lines hoping that might help, it did fix some issues.
Thanks
Jeff

Test.skp

Dave R · 11 Nov 2017, 22:33

Even scaled up, the tiny radius on the round overs creates some bad geometry. Make a reasonable radius and it works. I used 10 in.

jtri · 11 Nov 2017, 23:20

Dave
Thanks for you quick reply but I am unable to duplicate your results. Maybe the screen shot can help
Thanks
Jeff

fredo6 · 11 Nov 2017, 23:32

It all depends on your geometry.

As it has been generated by Curviloft, I imagine it is triangulated. Just turn on Hidden Geometry to verify it.

In that case, I am afraid that RoundCorner will have difficulty to perfrom its task, whatever the scale is. Sorry for that. Another algorithm is needed to handle those cases.

Fredo

Dave R · 11 Nov 2017, 23:33

Did you try with a larger radius? I used 10 in., not 5 in.

Edit to add: I redrew the shape rather than trying to reconstruct yours. I didn't use Curviloft so I didn't have the triangulation.

jtri · 12 Nov 2017, 01:14

Thanks so much for the help!

riuslyp · 21 Nov 2017, 10:11

I had some trouble in using this plugin. The object I had rounded seemed like useless afterwards, I could not move nor color it, or anything else since my SU 2013 would crash if I do that. Before rounding, I have set the offset etc to the appropriate value. Could someone advice me what to do? I have also installed the newest LibFred

Dave R · 21 Nov 2017, 10:22

@riuslyp said:

I had some trouble in using this plugin. The object I had rounded seemed like useless afterwards, I could not move nor color it, or anything else since my SU 2013 would crash if I do that. Before rounding, I have set the offset etc to the appropriate value. Could someone advice me what to do? I have also installed the newest LibFred

Can you share an example?

What is your graphics card? Are it's drivers up to date?

riuslyp · 22 Nov 2017, 06:55

@dave r said:

@riuslyp said:

I had some trouble in using this plugin. The object I had rounded seemed like useless afterwards, I could not move nor color it, or anything else since my SU 2013 would crash if I do that. Before rounding, I have set the offset etc to the appropriate value. Could someone advice me what to do? I have also installed the newest LibFred

Can you share an example?

What is your graphics card? Are it's drivers up to date?

I use AMD A8-7410 APU with AMD Radeon R5 Graphics, 2200 Mhz, 4 Core(s), and yes, my graphic card is up to date.
I was just trying to round a cube and I wanted to move it, but my SU then suddenly crashed. I had also tried to uncheck the 'hardware accelerator' but for no use.

fredo6 · 22 Nov 2017, 08:45

Are you really running SU2013 (as your profile indicates)?

Fredo

VancoD · 9 Feb 2018, 17:41

Thanks for the plug-in Fredo. It seems to do a fine job.

My issue is not in getting the tool to work - my issue is what is happening you my shape after the round-over.

What I'm working on is not a complex shape - it's essentially a rectangle 15x100x455 mm. The top face has a radius of 254mm into it. It's a long box with a grove in it

My issue is that after I round all my edges the "entities" in SketchUp are basically lost. I now have an amorphous rectangle shape and I've lost all the "dimensional attributes" to all the elements/faces - I cannot submit this to a manufacturer for production with the dimensional data visible as I'd like to.

I am arguably very new to SketchUp - have I missed something obvious here - perhaps some sort of layering or overlay where I can apply the round-over and still have all the "square" reference data in place?

EDIT:
Well - I can use the dimensions tool to indicate the dimensions, and that's technically "good enough" for my need. But I'm still curious to know if there's a way to keep that entity data in place.....

Dave R · 9 Feb 2018, 17:49

How about sharing the SKP file so we can see exactly what you've got and give you some guidance?

fredo6 · 9 Feb 2018, 19:49

@vancod said:

My issue is that after I round all my edges the "entities" in SketchUp are basically lost. I now have an amorphous rectangle shape and I've lost all the "dimensional attributes" to all the elements/faces - I cannot submit this to a manufacturer for production with the dimensional data visible as I'd like to.

That's not a problem with the plugin. If you were doing the rounding manually, you would have the same problem. You need to modify the faces affected by the rounding and create new facets.
So, it's more the sequence in your workflow. Do the rounding first (and other editing tasks) and then put the decoration (dimensions, textures, ...)

Fredo

99hash · 24 Feb 2018, 10:00

Hi Fredo,

Absolutely amazing plugin, I am new to Sketchup and am busy playing with some designs to see if it is worth buying a 3d printer, no point in getting a printer if I cannot create designs to print. This plugin works perfectly for external corners but I cannot seem to get this to work on internal shapes. For example I have cube with a hole through it and would like the edge of the hole rounded. When I use this tool it just erases the hole completely. Is this normal behavior or am I being stupid?

Thank you for all this work you have put in your tool

Nick