Tube coping template wrappers

ken

I believe this is what he requires. However, if he is working with actual tubing, something less than 3" in dia. he should scale up.

I do this procedure all the time to for Gulf of Mexico oil structures. I haven't found a plugin to accomplish this task. I do it the old hard way.

Make vertical pipe, 360 segments, so I have good accuracy on the coped pipe.
The cope pipe has segments to the amount of actual refence line I require. I alway make sure that the number of segments is always a whole number of degrees. As an example, 360 degrees divided by 50 would give you 7.2 degrees for each segment. That means there is one segment that is not whole. I usually use 36 segment, which gives me a segment for each 10 degrees.
I use the plugin "flattery" to flatten out each segment. Note to see each segment, you will have to turn on hidden lines.

There you are, the complete layout. I know it shouldn't be hard to make a plugin to do this, however, I don't have the skills. Wish you luck.

Ken

gregw

it's been many years since I've used one,but we used to call them "pipe saddle templates". We would make a pattern out of sheet metal and then trace it onto a piece of paper.

Iceracer

This is exactly what Im looking for. If there is no plug in for it I would give a go at making one if there is a tutorial on making plugins.

Dave R

Once you do the intersect faces routine, you can use Jim Foltz's Unfold plugin to lay the wrapper out flat. Or as Ken did, use the Flattery plugin.

Iceracer

Ok I just looked at some ruby stuff way over my head....

what the intersect faces routine?

Dave R

@iceracer said:

Ok I just looked at some ruby stuff way over my head....

what the intersect faces routine?

It's a basic native thing to intersect faces. Select the surface of the wrapper, right click on it and choose Intersect Faces>With Model to create the intersection. Make the pipe a component or group first so it doesn't get modified during the intersection process.

sdmitch

@iceracer said:

This is exactly what Im looking for. If there is no plug in for it I would give a go at making one if there is a tutorial on making plugins.

Tube Coping.gif
Here is a quick and dirty Plugin that duplicates Ken's process.

def tube_coping

mod = Sketchup.active_model
ent = mod.active_entities
sel = mod.selection
vue = mod.active_view
@vtd ||= 6; @htd ||= 4
val = UI.inputbox(["V Tube Dia;","H Tube Dia;"],[@vtd,@htd],"Tube Coping")
if val
 @vtd,@htd = val; grp = ent.add_group; gent = grp.entities
 cir = gent.add_circle(ORIGIN,Z_AXIS,@vtd/2,360)
 fac = gent.add_face cir
 fac.pushpull -@htd*2
 opt = ORIGIN.offset(X_AXIS,@vtd).offset(Z_AXIS,@htd)
 htc = gent.add_circle(opt,X_AXIS,@htd/2,36)
 vts = htc[0].curve.vertices.map{|v|v.position}
 hpt = []; del = Math;;PI*@htd/36
 #vts << vts[0]
 vts.each{|v| hpt << mod.raytest([v,X_AXIS.reverse])[0]}
 opt = ORIGIN.offset(X_AXIS,@vtd*2).offset(Z_AXIS,@htd/2);lpt=opt.clone
 cpt = []; cpt << opt
 for i in 0...vts.length
  npt = lpt.offset(Z_AXIS,vts[i].distance(hpt[i]))
  cpt << npt; lpt.offset!(X_AXIS,del) if i<vts.length-1
 end
 cpt << lpt
 ent.add_face cpt
 grp.erase!
end

end

ken

Darn sdmitch your quick on the draw.

One problem with your plugin, I show a 90 angle just to simplify the drawing. However, the angle can be any reasonable angle.

So if you add an input for the angle it should be good to go.

Thanks

Ken

sdmitch

@unknownuser said:

Darn sdmitch your quick on the draw.

One problem with your plugin, I show a 90 angle just to simplify the drawing. However, the angle can be any reasonable angle.

So if you add an input for the angle it should be good to go.

Thanks

Ken

How is the angle measured? From vertical? What should the min and max angle be?

Iceracer

The angle should be calculated from a existing centerline in two steps possibly 1 -3 tubes intersecting then select the tube we want to cope to the node.
Sdmitch are you in the US?

sdmitch

@iceracer said:

The angle should be calculated from a existing centerline in two steps possibly 1 -3 tubes intersecting then select the tube we want to cope to the node.
Sdmitch are you in the US?

Yes I am.

Please post a sample model,version <= 2014, to play with.

Please describe just how you would envision how the plugin should work and make it "Coping for Dummy's"

Iceracer

Ill have to get it Tommoro I can snap a picture of the actual piece and send you a file tommoro if you need it. And I appreciate the coping for dummies. This is way out of my expertise.

Iceracer

Here is my dilema coping a single angle is not a issue but adding multiple tubes and then rotating and angling back makes it difficult and then coming in on the other end of the tube make it more interesting.
Mitch apparently I cant add a skp file here for you. send me a pm with a email and Ill send the joint to you so you can see it more clearly with all the angles happening.