[Plugin][$] RoundCorner - v3.4a - 31 Mar 24

TIG · 17 Jan 2015, 12:18

All of Fredo's tools should work with v2015, but you need to install the latest versions from the PluginStore.
AND you must have the latest version of LibFredo installed also available there...
http://sketchucation.com/pluginstore?pln=LibFredo6
The invalid byte UTF-8 suggests an older file version.
It also sometimes occurs with file-paths including weird accented characters etc [although your user-path looks innocuous enough !]

Another issue might be if you have copied over lots of files from an earlier SketchUp version's Plugins folder - you might have copied some old files across which are incompatible/unwanted - wherever possible you should always install fresh/latest copies when setting up your new SketchUp version...

If getting the LibFredo etc doesn't fix things, then please provide screenshot[s] of your Plugins folder's contents, so we can see if you have any old/wrong files that need removing...

NicholasElliott · 17 Jan 2015, 14:35

How do you download the file in the first place!?
I need the link to the file in order to install… there used to be a clear button that said ‘DOWNLOAD’!
Where has that gone!?

Dave R · 17 Jan 2015, 15:41

@nicholaselliott said:

How do you download the file in the first place!?
I need the link to the file in order to install… there used to be a clear button that said ‘DOWNLOAD’!
Where has that gone!?

From the first post in this thread:

It seems pretty clear to me. Do you need more help than that?

TIG · 17 Jan 2015, 19:33

Almost every Plugin's RBZ in the SketchUcation PluginStore has a red 'Download' button.
This downloads the RBZ onto your compuyter so you can install it...

In the SketchUcation PluginStore Toolset dialog that is red 'AutoInstall' button, this skips the download step and simple installs it for you...

There are clear links in that post to the PluginStore's pages with the Download button...
For both the Plugin itself and the Lib helper that it needs...

How easier could we make it ?

aounallah anis · 23 Jan 2015, 20:54

hi

Gormon · 5 Feb 2015, 11:00

Terribly enrages! I don't see the button or the link to downloading of very useful plug-in. Marasmus!

Dave R · 5 Feb 2015, 12:07

@gormon said:

Terribly enrages! I don't see the button or the link to downloading of very useful plug-in. Marasmus!

Really? It's very clearly spelled out in the first post of the thread.

TIG · 5 Feb 2015, 14:24

Almost all Plugins are now hosted on the SketchUcation PluginStore page.
The page in question links to that directly...
http://sketchucation.com/pluginstore?pln=RoundCorner

Or you can browse the many entries yourself - by search, by author, by recent etc...
http://sketchucation.com/pluginstore

Also please note that most of Fredo's tools also require his LibFredo installed.
That is also available from the PluginStore - again it's linked...
http://sketchucation.com/pluginstore?pln=LibFredo6

I trust you know how the install RBZ files ?
http://sketchucation.com/resources/tutorials/beginner/108-installing-sketchup-plugins

gokhan0322 · 1 Mar 2015, 09:06

thnx bro

Stepanov · 8 Mar 2015, 11:17

good afternoon!
I can not download the plugin
I do not see download button

Gábor · 9 Mar 2015, 11:12

@stepanov said:

I can not download the plugin
I do not see download button

Do you have AdBlock on? Do you see the advertisements on the site?
As the site is maintained partly based on the support from advertisers, only those are allowed to download plugins who do not block ads.

pvidal · 9 Mar 2015, 14:41

Hi there!

I have a serveral issue to round a complex edge

when I check whith the solid Inspector plugin, the result is fine

I set the round Corner Plugin and run

and the result is full of surfaces borders and internal faces edges.

can you tellme why?

Thanks a lot!

Dave R · 9 Mar 2015, 16:15

Too small. Try scaling the model up by a factor of 100 or more before running Round Corners.

pvidal · 9 Mar 2015, 17:11

Thanks Dave
But, when I scaling up the model, it is not necessary also scale the offset factor too?
in this case the problem is not still happening?

thanks

Dave R · 9 Mar 2015, 17:29

Yes. You have to scale the offset by the same factor.

pvidal · 9 Mar 2015, 18:39

When I do, the errors in geometry are the same, like if I had not scaled...

TIG · 9 Mar 2015, 18:41

Then maybe x1000 ?

pvidal · 9 Mar 2015, 19:26

I just do that!, and still happens.
I go upload a .skp file and a picture of the element what I need model.
Is a Sheet of steel, what simulate a tile roof.

a thousand of thanks!!

PD: the escale in the skp file is 1000/1

SU version: Sketchup Pro 2014

gilles · 9 Mar 2015, 20:00

Don't know how you did this but your model is full of bad geometries, a basic profile push-pull should provide good geometries.

Round corner will go crazy trying to round this.

Redraw from scratch.

pvidal · 9 Mar 2015, 23:43

Thanks Gilles!

I did the model from two extruded shapes and intersect them, after I generate the shape of the phase shift, like the components in the file I upload before, then I explode all components. (basicly)