Scripting help. Where to start.....

sdmitch

Great, thank you for all of your help! I'm really sorry to keep asking you to push this further! I have two more questions.

Currently the script is locating each block at a random point within the predefined cube. Can this cube be removed so that the structure is free to grow in any direction ( on second thoughts maybe removing the ability to grow in the -z plane direction?

If this process was replicated in the physical word we would have to build from the bottom, securing the structure as we go. If we were to build it, the construction process would be similar to that of a growing tree (for every incremental increase in height there is an increase in the diameter), this helps the structure to retain its integrity. Could this process be replicated? So that the script builds from the bottom -up?

As always thanks again for your help, I really appreciate it!

I would assume so but probably produce some very weird results. Not sure what "-z plane direction" is.
Not sure why the order of creation would effect the construction. Varying the "diameter" of the pieces from level to level would be easy enough to do.

o0rico0o

I'm all about the weird results! when I said '-z direction' I was referring to nothing below the ground plane.
I was thinking in terms of varying the diameter of the overall structure, to create an overall form that is similar to that of a truncated square pyramid.
my original image also allows for T connections. how easy would it be to integrate this into the script?

sdmitch

@o0rico0o said:

I'm all about the weird results! when I said '-z direction' I was referring to nothing below the ground plane.

This code creates a path which can get a little weird. Plus it varies the "diameter" relative to the height.

mod = Sketchup.active_model
> ent = mod.active_entities
> sel = mod.selection
> # create a 3d node network
> nodes = []; nhsh = {}
> for z in 0..5
>  for y in 0..5
>   for x in 0..5
>    nodes << Geom;;Point3d.new(x.to_s.to_l,y.to_s.to_l,z.to_s.to_l)
>    nhsh[nodes.last]=0
>   end
>  end
> end
> #random connected path
> begin
>  node = nodes[rand(nodes.length)];#pick starting node
> end until node.z==0
> mps = []; loops = 0; 
> loop do
>  try = 0;dist=0
>  begin
>   near = nodes[rand(nodes.length)]
>   try += 1
>   unless near==node
>    dist = node.distance(near)
>    mp = Geom;;Point3d.linear_combination(0.5,node,0.5,near)
>    unless (dist > '1.75'.to_l || mps.include?(mp))
>     mps << mp
>     break
>    end
>   end
>  end until try==nodes.length
>  if try < nodes.length
>   cdn = ['Black-Black','Blue-Blue','Blue-Black','Green-Green','Green-Blue','Green-Black','Yellow-Yellow','Yellow-Green','Yellow-Blue','Yellow-Black','Red-Red','Red-Yellow','Red-Green','Red-Blue','Red-Black']
>   cd = mod.definitions[cdn[rand(cdn.length)]]
>   ci = ent.add_instance(cd,Geom;;Transformation.new())
>   xys = '1'.to_l * (1.0 + (3.0-node.z)/10.0)#vary diameter relative to height
>   tr = Geom;;Transformation.scaling(xys,xys,dist)
>   ci.transform! tr
>   vector = node.vector_to(near).normalize
>   xa,ya,za = vector.axes
>   tr = Geom;;Transformation.axes(node,xa,ya,za)
>   ci.transform! tr
>   Sketchup.active_model.active_view.refresh
>  else
>   puts "trys exceeded nodes"; return
>  end
>  node = near
>  loops += 1; break if loops > 250
>  Sketchup.set_status_text "Segment #{loops}"
> end
>

node network path.jpg

I was thinking in terms of varying the diameter of the overall structure, to create an overall form that is similar to that of a truncated square pyramid.

This code variation produces something like a pyramid.

for z in 0..3
>  for y in z..5-z
>   for x in z..5-z
>

node network pyramid.jpg

my original image also allows for T connections. how easy would it be to integrate this into the script?

Nothing I do prevents "T" connections.

o0rico0o

Brilliant this is perfect! The only issue that I'm having is that the model is too small, How can I change the script to make the individual elements 50x50x800mm? Thanks again!

sdmitch

@o0rico0o said:

Brilliant this is perfect! The only issue that I'm having is that the model is too small, How can I change the script to make the individual elements 50x50x800mm? Thanks again!

Unless you eliminate all diagonal elements, they can't all be 800mm.

o0rico0o

No thats fine, I don't mind variation, I was just wondering how to adapt the script to work at a larger scale. At the moment the elements are drawn at 0.2x0.2x3mm

sdmitch

@o0rico0o said:

No thats fine, I don't mind variation, I was just wondering how to adapt the script to work at a larger scale. At the moment the elements are drawn at 0.2x0.2x3mm

This variation produces 50X50X800mm elements.

mod = Sketchup.active_model
ent = mod.active_entities
sel = mod.selection
# create a 3d node network
nodes = []; nhsh = {}
for z in 0..5
 zz = (z*800.mm).to_s.to_l
 for y in 0..5
  yy = (y*800.mm).to_s.to_l
  for x in 0..5
   xx = (x*800.mm).to_s.to_l
   nodes << Geom;;Point3d.new(xx,yy,zz)
   nhsh[nodes.last]=0
  end
 end
end
#random connected path
begin
 node = nodes[rand(nodes.length)];#pick starting node
end until node.z==0
mps = []; loops = 0;
loop do
 try = 0;dist=0
 begin
  near = nodes[rand(nodes.length)]
  try += 1
  unless near==node
   dist = node.distance(near)
   mp = Geom;;Point3d.linear_combination(0.5,node,0.5,near)
   unless (dist > 1400.mm || mps.include?(mp))
    mps << mp
    break
   end
  end
 end until try==nodes.length
 if try < nodes.length
  cdn = ['Black-Black','Blue-Blue','Blue-Black','Green-Green','Green-Blue','Green-Black','Yellow-Yellow','Yellow-Green','Yellow-Blue','Yellow-Black','Red-Red','Red-Yellow','Red-Green','Red-Blue','Red-Black']
  cd = mod.definitions[cdn[rand(cdn.length)]]
  ci = ent.add_instance(cd,Geom;;Transformation.new())
#  xys = '1'.to_l * (1.0 + (3.0-node.z)/10.0)
  tr = Geom;;Transformation.scaling(15.7480315,15.7480315,dist)
  ci.transform! tr
  vector = node.vector_to(near).normalize
  xa,ya,za = vector.axes
  tr = Geom;;Transformation.axes(node,xa,ya,za)
  ci.transform! tr
  Sketchup.active_model.active_view.refresh
 else
  puts "trys exceeded nodes. dist=#{dist}"; #return
 end
 node = near
 loops += 1; break if loops > 250
 Sketchup.set_status_text "Segment #{loops}"
end

o0rico0o

Hmmmm, did it work for you? Im getting this?

Screen Shot 2014-12-01 at 17.17.10.png

sdmitch

@o0rico0o said:

Hmmmm, did it work for you? Im getting this?

[attachment=0:12yqg6cm]Screen Shot 2014-12-01 at 17.17.10.png[/attachment:12yqg6cm]

Yes it works for me. Are you using the model I sent you? Have you created your own components? Have you changed the model units from inches?

o0rico0o

Ahhh, yes, I changed It from inches to mm. That could be the issue, Thanks!