Curved Staircases

driven · 9 Feb 2014, 18:27

@Walt
what do you get if you paste this in 'Ruby Console'

 status = Sketchup.is_online

@Garry I PM'd them the other day?

john

mwm5053 · 9 Feb 2014, 20:31

@Driven

jeff hammond · 9 Feb 2014, 22:52

@garry k said:

Jeff have you tried with template of feet?

yeah.. and i encountered another error with it (using the 2013 template Engineering - Feet

i keeping getting the error 'Tread bullnose must be at least 1/2 of tread thickness'.
the settings i'm using while getting that error are:
Tread Thickness: 0.125' (or 1.5")
Tread Bullnose: 0.083' (or 1")

so the error message isn't corresponding to my settings (if i'm properly understanding the message and settings)

@unknownuser said:

My plan is to connect to web while in trial. Once a user is licensed then connecting to web site will no longer be necessary.

oh.. i see. that sounds good

Garry K · 10 Feb 2014, 15:59

Jeff - both the top and bottom of the tread get bullnosed. So you can't bullnose the top with a 1" radius and the bottom with a 1" radius.

In this case the maximum bullnose for a 1.5" tread is 0.75".

Garry K · 10 Feb 2014, 16:03

Walt - all I can think of doing is pulling out the http code and putting it into a very simple rb script ( not scrambled ).

What user ID are you using? If it isn't the default "User" "test" then I will see what my logs show at the web site. We'll see if we made it that far.

Garry K · 10 Feb 2014, 16:07

John - I looked at my PM messages - I have only received 1 since I put up version 1.0.7 08 Feb 2014, 08:39( which had the feet fix ).

Your last message had to do with the beta version 2014.

mwm5053 · 10 Feb 2014, 16:16

@ Garry username is mwm5053. I have been able to Login to website with no problems still getting 101 error after clicking ok web dialogue pops up but clicking ok for default values nothing happens heres a screenshot.

Garry K · 10 Feb 2014, 16:42

Walt - If you look at the title of the web dialog it is saying "http error 0". Sorry about the confusion. I thought that it would be good to show the web dialog whether you have an error or not? I could change the back ground color from wheat to red or something like that.

The other thing to note is that you may need more accuracy than 1/2" precision to properly draw a stair case. I'm not exactly sure how sketchup handles smaller values than precision.

If you let the defaults.txt file to "User" and "test" and connected then you should see "Testing - temporary status granted"

If you edited defaults.txt file to "mwm5053" and put in the emailed password then you should see "You have 30 days left in trial"

mwm5053 · 10 Feb 2014, 16:56

I changed defaults txt back to user / test and precision to 1/64 still get screenshot error

Garry K · 10 Feb 2014, 17:07

Walt - I went to my web site and took a look. There isn't a single http attempt for user "mwm5053".

I also looked at all of my registered users and there isn't a user "mwm5053" in that file.

You need to go to my web site - CabMaker32.com and click logon and register. You will then receive an email with your password. You can also send me a private message with your email address. I can also look in my user file and see if that email address has been registered under perhaps a different user.

mwm5053 · 10 Feb 2014, 17:14

Now thats really weird

jeff hammond · 10 Feb 2014, 17:23

@garry k said:

Jeff - both the top and bottom of the tread get bullnosed. So you can't bullnose the top with a 1" radius and the bottom with a 1" radius.

In this case the maximum bullnose for a 1.5" tread is 0.75".

that's what i thought.. you may want to consider changing the wording of the error message then:

'Tread bullnose must be at least 1/2 of tread thickness'

to something along the lines of:
max bullnose is 1/2 tread thickness.

driven · 10 Feb 2014, 17:26

@Garry
it's working in 'feet' Template now...
the cache reset took a couple of goes...

added some info so you can see what I get my end...

Ruby version is _____________ 1.8.5 Sketchup version is __________ 13.0.4811 Sketchup version path is __________ /Applications/SketchUp 2013/SketchUp.app Sketchup process pid is __________ 86823 @modPath is __________ unsaved stair time 0.922734 stair time 0.922350

<html><head>
<meta http-equiv="MSThemeCompatible" content="Yes">
<style type="text/css">

  * { padding; 0; margin; 0; }
  body { background-color; #F9EBD1}
  fieldset { float; left; background-color; #F9EBD1; border-color; black; margin; 3px;}

  fieldset p {display; table-row;
			  font-family; Arial, Helvetica, sans-serif;
			  font-size; 90%; color; black; height; 27px;}

  fieldset input,
  fieldset select,
  fieldset label {display; table-cell; margin; 2px; width; 120px;}

  fieldset label {text-align; right;}

  fieldset input,
  fieldset select {margin-left; 10px; background-color; wheat;}
</style>
</head>

<body>
<form>

    <fieldset>
        <p><label>Inside Stringer;</label><select id="inside_stringer"><option>Housed</option><option>Sawtooth</option><option>None</option></select></p>
        <p><label>Options;</label><select id="inside_option"><option>Has Heel</option><option>Has Foot</option><option>Both</option><option>None</option></select></p>
        <p><label>Thickness;</label><input type="text" id="inside_thickness"></p>
        <p><label>Width;</label><input type="text" id="inside_width"></p>
        <p><label>Rail Options;</label><select id="inside_rail"><option>Guard Rail</option><option>Wall Rail</option><option>None</option></select></p>
    </fieldset>

    <fieldset>
        <p><label title="Set to none for a spiral where spindles are used to tie the treads togethers">Outside
            Stringer;</label><select id="outside_stringer"><option>Housed</option><option>Sawtooth</option><option>None</option></select></p>
        <p><label>Options;</label><select id="outside_option"><option>Has Heel</option><option>Has Foot</option><option>Both</option><option>None</option></select></p>
        <p><label>Thickness;</label><input type="text" id="outside_thickness"></p>
        <p><label>Width;</label><input type="text" id="outside_width"></p>
        <p><label>Rail Options;</label><select id="outside_rail"><option>Guard Rail</option><option>Wall Rail</option><option>None</option></select></p>
    </fieldset>

    <fieldset>
        <p><label>Stair Direction;</label><select id="direction"><option>Clockwise</option><option>Anti Clockwise</option></select></p>
        <p><label>Stair Width;</label><input type="text" id="stair_width"></p>
        <p><label title="Set to 0 and StairMaker will calculate based on degrees and Average Run">Radius;</label><input type="text" id="radius"></p>
        <p><label title="Set to 0 and StairMaker will calculate based on radius and Average Run">Degrees;</label><input type="text" id="degrees"></p>
        <p><label>Rail Style;</label><select id="rail_style"><option>Classic</option><option>Modern</option><option>Round</option><option>Square</option><option>Standard</option><option>Traditional</option></select></p>
        <p><label>Open Risers;</label><input type="checkbox" id="open_riser"></p>
        <p><label>Total Rise;</label><input type="text" id="total_rise"></p>
        <p><label>Risers;</label><input type="text" id="risers"></p>
        <p><label>Riser Thickness;</label><input type="text" id="riser_thickness"></p>
    </fieldset>

    <fieldset>
        <p><label>Tread Thickness;</label><input type="text" id="tread_thickness"></p>
        <p><label title="Average Run is ignored if both Radius and Degrees are set">Average Run;</label><input type="text" id="average_run"></p>
        <p><label>Tread Bullnose;</label><input type="text" id="tread_bullnose"></p>
        <p><label>Nosing;</label><input type="text" id="nosing"></p>
        <p><label>Flare Amount;</label><input type="text" id="flare_amount"></p>
		<p><label>Progressive Flare;</label><input type="text" id="progressive_flare"></p>
        <p><label>Flare Count;</label><input type="text" id="flare_count"></p>
        <p><label>Floor Thickness;</label><input type="text" id="floor_thickness"></p>
        <p><label>Create Stair;</label><input type="button" onclick="do_click()" style="background; silver" value="OK"></p>
    </fieldset>

</form>
<script type="text/javascript">

if ( document.addEventListener )
	document.addEventListener( "DOMContentLoaded", ready, false );
else if ( document.attachEvent )
	document.attachEvent( "onreadystatechange", check_ready );

function do_click()
{
   var items  = document.getElementsByTagName( '*' );
   var count  = items.length;
   var text   = "";

   for ( var i = 0; i < count; i++ )
   {
	  if ( items[i].type == "select-one" )
		 value = items[i].options[items[i].selectedIndex].value;
	  else if ( items[i].type == "text" )
		 value = items[i].value.replace(/'/g, '`');
	  else if ( items[i].type == "checkbox" )
		 value = items[i].checked.toString();
	  else
		 value = "";

	  if ( value.length > 0 )
	  {
		  if ( text.length > 0 )
			 text += "&";

		  text += ( items[i].id + "=" + value );
	  }
   }

   ruby_call( text );
}

function from_ruby( data )
{
	var element;
	var pair;
	var pairs = data.split( '&' );
	var count = pairs.length;

	for ( var i = 0; i < count; i++ )
	{
		pair = pairs[i].split( '=' );

		element = document.getElementById( pair[0] );

		if ( element.type == "select-one" )
		{
			if ( pair[1].indexOf('|') == -1 )
				element.selectedIndex = pair[1];
			else
				populate_drop_down( element, pair[1] );
		}
		else if ( element.type == "text" )
			element.value = pair[1].replace(/`/g, "'");
		else if ( element.type == "checkbox" )
			element.checked = pair[1] == '1';
	}
}

function populate_drop_down( element, data )
{
	var options = data.split( '|' );
	var count   = options.length;
	var option;

	element.innerText = "";

	for ( var i = 0; i < count; i++ )
	{
		option = document.createElement( "option" );
		option.text = options[i];
		element.add( option, null );
	}
}

function ruby_call( text )
{
   query = 'skp;ruby_callback@' + text;
   window.location.href = query;
}

function check_ready()
{
	if ( document.readyState === "complete" )
		ready();
}

function ready()
{
   ruby_call( 'loaded' );
}

</script>


</body></html>

Garry K · 10 Feb 2014, 17:49

Jeff - Good catch. You are correct - the message is worded wrong. I have changed it for the next version.

Garry K · 10 Feb 2014, 17:52

Walt - that is wierd - you normally don't see that screen. The web hosting site has been experiencing hack attacks. Please tell me if you see this screen again.

Garry K · 10 Feb 2014, 18:51

Walt - put this rb into your plugins folder and see what you get.

There will be a menu item under plugins called "Web Dialog Test"

test file

mwm5053 · 10 Feb 2014, 20:56

Here's my results.

Garry K · 10 Feb 2014, 21:38

Walt - I'm sorry but I can't answer that question. I haven't heard anyone else having that problem. It may have something to do with http configurations on your specific machine.

Maybe someone else can answer it. Perhaps start a new thread on this. Maybe the developer forum will catch some attention.

As you can see - the code isn't doing a whole lot.

mwm5053 · 10 Feb 2014, 23:39

@ Garry you're right I installed 1.0.8 rbz on Mac Book Pro and works great with no hitches. Mac Pro (desktop) running SU 8 and Lion and Mac Book Pro (laptop) running SU 8 and Mavericks.

Garry K · 17 Feb 2014, 03:36

I now have language translation working. There is a folder called translations and currently there are 4 files in it.

en.lang - English
fr.lang - French
ru.lang - Russian
zh.lang - Chineses ( traditional )

Near the top of the defaults.txt file there is a language= section where you can enter the 2 character language code. If you leave the language= blank the system will try to figure out the locale code.

These language files are straight translations and as a result there might be some funny and or inappropriate translations.

Anyone interested in helping out with any language translation can get a hold of me.