Subdivision Modeling Furniture
-
@gilles said:
Nice work, but be care with Le Corbusier copyright:
no way will that hold up in court.
but yeah, nice work for sure
-
Nice modeling, blender is one of the best SubD modeling...
allanx
-
I have to agree that the modelling skills on display here really are superlative - easily on a par with the best stuff offered for sale. Just the right amount of detail, imperfection and deformation.
Are the modelling techniques similar to those used with Artisan.....in other words, is it a transferable skill - either using SU skills in max and blender, or using max and blender skills in SU?
-
Nice modeling!
@hieru said:
Are the modelling techniques similar to those used with Artisan.....in other words, is it a transferable skill - either using SU skills in max and blender, or using max and blender skills in SU?
Using Artisan is no Sub-D modeling... it subdivides geometry yes, but destructive and using tris.
-
I appreciate that, but wondered whether there are any commonalities in the approach to creating proxies.
-
Hi Guys,
Thanks for the nice words about the model. Great to hear that you like the models. I'will prepare a model for SU and post it here for you to download. Love to see it in one of your renders or work.
Here is another Chair I made and a test I did trying the model the Chesterfield look thingy. I decided to first try it out on a lamp.
@Hieru:
The modeling proces is more or less the same as with artisan. It's all about where you cut the geometry with the knife tool. Most used tools are Bevel, Extrude, and a lot of loop selections and moving pointsGreetz Twan
-
@pugz1983 said:
The modeling proces is more or less the same as with artisan. It's all about where you cut the geometry with the knife tool. Most used tools are Bevel, Extrude, and a lot of loop selections and moving points
I had a look at various tutorials over the weekend and could definitely see some crossover
and useful approaches that might work with Artisan.Keep up the good work and thanks for inspiring me to up my game
-
is there a particular reason you are going into Sub-D rather than NURBS?
i am asking becoz i have just started to get my hands dirty with Rhino. I just want to make sure i am making the right decision. My primary focus is in architecture, but i dont mind diving into furnitures and other industrial designs in the future! -
@unknownuser said:
@gilles said:
Nice work, but be care with Le Corbusier copyright:
no way will that hold up in court.
but yeah, nice work for sure
"The French courts have found in favor of the Le Corbusier rights-holders who initiated these claims." looks like they have case already win in court, but Getty Images is appealing...
French courts seem quite interesting as one publish pictures of the Eiffel tower in daylight, but not with a nigh illumination http://www.eiffel-tower.com/the-eiffel-tower-image-and-brand/image-rights-the-eiffel-tower-brand.htmlGreat modelling anyways!
-
Should I add this? Here?
Recently, zbrush 4 r6 is out. What's new?
A great new z remesher, meaning a new auto retopology tool. Amazing, after my first tests.
Just sculpt the basics, under dynamesh mode, ask for retopology then.
Here an example.After auto retopology (ZBrush imported to blender)
After UV ing (blender is one of the best UV editors around) applying displacements (bumps) and AO maps.
A ~24 k faces model.
-
Hi Micha,
Love your style. Seems you got the whole UV mapping and displacement thing under control. I've had a look at Z-brush. I like to possibilities of teh app but the navigation and UI are not my cup of tea. Can't get my head around the navigation. For the basic sculpting of furniture I use other sculpting app.
Greetz Twan
-
thanks Twan
Though real displacements can be activated, what you see in render is only a new bumps algorithm of cycles.Plus the use of a pre baked AO map.
Problems with the zbrush navigation? There's a whole documentation located in zb folder.
However, because you obviously prefer the SUp style, instead of the default xyz, select the y. (the buttons column on the right)
-
@unknownuser said:
Problems with the zbrush navigation? There's a whole documentation located in zb folder.
And when you press Ctrl when your mouse is over an Icone you will have some help's text!
-
Twan - these models are stunning!!!!!
I look forward to your suggestion of getting them into the SCF store! Will be a great inclusion!
-
@unknownuser said:
The hardest part in my opinion is the creases of the fabric. There are a few methods to make creases like sculpting or using displacement maps. I'm still not sure what the best method is. Still a long way to go but I hope I'm on the right track. Love some comments on the model and render.
Your modeling is impressive.
Fabric creases isn't that hard. Your best option is the excellent sculpt mode (multiresolution modifier) of blender.
Then you can have UVs (blender is one of the most advanced on this matter) and bake displacements or bumps or normal maps (from multires). This is important for exporting these models as low poly base with displ or bumps.
Staying in blender/cycles render, you don't need it. Because you can have the low poly in preview scene, sending the hi subd data to the render engine.
The hardest part, IMO, is the UV mapping. Especially on geometrical patterns like fabrics tartans etc. You may need to have the unwrapped faces (in UV editor) aligned to these patterns. Manually this is quite a PITA.
In blender there's a wonderful method of unwrapping. "Follow active quad". Not the right place to explain it further but you may visit my small tutorial on such methods http://blenderartists.org/forum/showthread.php?273033-Sculpting-with-UVs-and-displacements&p=2245866&viewfull=1#post2245866
Though this method deals with something different, the way I use the UV editor may interests you.You mentioned the term "crease". But it was about sculpting.
However, in subdivision modeling there is an important hidden trick.
You can select loops, edges, and apply a crease value. When subd (catmul clark smoothing) takes place, these edges will remain sharp-er according to the value of crease.
Great !! But, exporting as obj there may be an issue. Will crease data will exported as well? Obj supports it. Blender? You have to try the most recent betas from official http://builder.blender.org/download/
I'm sure, C4D already supports it.
If you export low poly assets + displ maps in SUp, you just apply the subsurf modifiers, so, no issues on this.
In recent blender builds, collada works just fine. This is how you export in SUp. -
@unknownuser said:
If you export low poly assets + displ maps in SUp, you just apply the subsurf modifiers, so, no issues on this.
In recent blender builds, collada works just fine. This is how you export in SUp.Some of us have a .obj exporter for SketchUp that can export tri'd quads into Blender and in Blender it is only Quads
-
Your thread is Epic! (48 pages for the moment)
By Michalis -
Thanks pilou, too kind of you. 48 pages, but I posted a synopsis in the second post of the most important tricks and post around these pages.
@Rich, we're talking about the opposite.Exporting from SUp to blender or to other apps can be a PITA.
We suggest TIG's free obj exporter, I guess so. Excellent to export a rather huge SUp scene and render in cycles.- triangulation.
- not welded vertices. Edit mode (blender) selelct all [W] menu, delete doubles
- Select all, [ctrl+F] menu in blender, tris to quads, cross your fingers.
- UVs in SUp: Every face is a UV not connected island. -10 for SUp. LOL
(Most SUp users fear to get involved into a decent UV editor. If they knew all about the SUp UV editor... well nevermind). UV editor ha ha. Just use blender, select [U] menu, reset/ ctrl+P to pack these separated faces on UV texture map and have something similar to the SU UV editor. Ask for follow active quad and have something much more interesting. If it is a house something walls, select cubic and have something better. Or, like me, start thinking how great is to have an advanced UV editor for free. Learn how to use it. For archi vis use, it is one of the most important tools anyway.
-
We speak the same Mick.
I now use Blender extensively and where i deal SU models I use the unreleased SU2Blender obj exporter that removes tris from SU mesh and delivers to blender quad only mesh.
It does mean adopting a new modeling philosophy in SU but that is what users need to do anyway if they wish to become proficient in Blender.
-
@unknownuser said:
I now use Blender extensively and where i deal SU models I use the unreleased SU2Blender obj exporter that removes tris from SU mesh and delivers to blender quad only mesh.
Some more informations Rich?
Advertisement