New Pattern Fill feature in Layout
-
I did try the exploding/gluing method like you mentioned and thought it took longer then actually drawing new shapes on top of sketchup geometry, sometimes. And it's also a destructive method.
But nevertheless it's a good solution too. And I guess what works best depends on what kind of geometry one is dealing with.
LO 2013 is pretty new. I'm sure after some time there will some nice new workflow ideas
that will improve things. -
@jolran said:
I did try the exploding/gluing method like you mentioned and thought it took longer then actually drawing new shapes on top of sketchup geometry, sometimes. And it's also a destructive method.
But nevertheless it's a good solution too. And I guess what works best depends on what kind of geometry one is dealing with.
LO 2013 is pretty new. I'm sure after some time there will some nice new workflow ideas
that will improve things.It is and I find it quicker to draw new ones as well... Whatsmore I can keep hatching on a separate layer than linework which is also convenient.
This as well as the dimension style is a little convoluted.
-
@jolran said:
Should I continue development further you think ?
I have not had time to download the plugin, maybe over the weekend. But, in general, yes you should continue development. In an area like this where none of the available solutions are real solutions, any new ideas would be welcome.
None of the workarounds would be applicable to me, much as they're appreciated. If you're looking to produce one finished set of drawings then exploding and rebuilding, etc. might work but I sit between the designers and the fabricators. My drawings can easily go through half a dozen major revisions in a day. That's why I'm always forced to go back to AutoCAD from SketchUp. Annotations and hatches in SketchUp are way too primitive to have a place in my workflow.
That's why I'm learning Rhino - Rhino has a modeling environment that's similar to SketchUp but with real annotations and hatches. The hatching and annotation aren't yet at the level of functionality that AutoCAD has achieved but it's much further along than SketchUp.
-
@jolran said:
Should I continue development further you think ?
Please do. For me as an architect real hatches in SketchUp are way better than those in LayOut:
- they can be exported to third party programs
- SU line-hatches in LayOut are much more crisp lines (no jaggies)
- if I draw a section in SU and apply real hatches in SU those two are re-used multiple times in LayOut: once for the section 1:100 and fragments of the same section multiple times as details scale 1:10
Doing the hatches in LayOut is a no-go for me because of nr 3) If I would have to make changes I would have to do them on multiple parts in LayOut which would increase the risks of forgetting something / making errors etc.
Greetings
Max
edit: quote-code went wrong
-
Point taken, I'll continue development then
It may delay though, working on some other stuff right now.
Thanks for showing interest.
/Joel
-
- SU line-hatches in LayOut are much more crisp lines (no jaggies)
New Layout Hatch does not have "Jaggies", The old Raster Imports of SU models do.
-
@jolran said:
Point taken, I'll continue development then
Absolutely wonderful. Highly appreciated! The process of hatching 2d sections of buildings would take a fraction of time with a plugin like the one you are developing (doing it by hand at the moment). The screenshot http://sketchucation.com/forums/viewtopic.php?f=323&t=38637&start=270#p365946 you released some time ago already made me drool
greetings, Max
-
I guess I'm just missing the point of the pattern/hatching tool in Layout, if you can only use it on shapes created in Layout. If you wanted to hatch a model that you brought in, you'd have to explode it which would eliminate the ability to update the model.
I guess I just don't use Layout shapes too much, so I've never had a need to apply hatching to them. Most of what I put in Layout are Sketchup models and annotations, so I'd just apply hatching as a material in Sketchup.
Confused...
-
@unknownuser said:
I guess I'm just missing the point of the pattern/hatching tool in Layout, if you can only use it on shapes created in Layout. If you wanted to hatch a model that you brought in, you'd have to explode it which would eliminate the ability to update the model.
I guess I just don't use Layout shapes too much, so I've never had a need to apply hatching to them. Most of what I put in Layout are Sketchup models and annotations, so I'd just apply hatching as a material in Sketchup.
Confused...
The main reason I do it it is because with your method you are left with raster images and not vector lines. I want vector.
-
I appreciate your confusion Matt. I've just found myself completely reviewing my workflow for the 2013 release. Without getting bogged down in detail I have now resolved my LO layers from bottom to top to include 1.Views, 2. fills and 3. linework for producing sections.
Import the full section view onto layer 1. In SU create group from slice, save as component and import onto layer 3. and align with layer 1. Turn off layer 1. Switch to layer 2 and trace areas that need filled including masking parts of layer 1. Turn on layer 1. Job done. If you update the slice it is a quick operation to save it and the changes will normally be immediately obvious unless you are using black fills.
-
Any one know how to decrease the line-weight/ Transparency of the LO hatch fills?
P.
-
The hatch fills are image files. As such they don't really have a line weight to adjust. You could edit the fill image in an external image editor to adjust those things, though.
-
Thanks, I assume I just lower the opacity in ps? will give it a go.
P.
-
In a similar vein, in Layout 2013, my pattern fills seems to become grey (lighter in value) the smaller they are rendered. For example, I'm importing a .bmp that's 425 x 283 at 120KB and in my Layout file, into a section detail that is 3" = 1'-0" scale, the pattern (hatch) is barely visible while viewing the page at full size. Should the pattern fills (all of them exhibit this including the default patterns) be black and white, not grey? Unless I set the pattern scale to 1.0x or higher, it can't be seen. And in details, many patterns need to be scaled down to .25 or lower to be seen. I guess the next step is to create my own, smaller, finer, greater resolution patterns... Am I missing something?
-
The fills are just raster images so it shouldn't be surprising that they appear to get lighter the smaller they are on screen.
-
Thanks Dave-- I think I'll revert to the old, tried and true method of hatching by hand
on the print: won't take much time and it'll look fine. -
Most of my projects in which I need hatching require the hatches to be vector lines so I wind up making most of them in SketchUp as edges. I usually put them into LO as viewports separate from the model itself so I can control the appearance of the hatching separately.
-
After crippling LO with large custom hatch pattern files I have spent some time reducing the file size with moderate success, they print well enough but the screen presentation when exported to PDF leaves a lot to be desired until you zoom right in to about 600% ! I may yet return to local vector hatch patching
Advertisement