sketchucation logo sketchucation
    • Login
    ℹ️ Licensed Extensions | FredoBatch, ElevationProfile, FredoSketch, LayOps, MatSim and Pic2Shape will require license from Sept 1st More Info

    [Plugin][$] RoundCorner - v3.4a - 31 Mar 24

    Scheduled Pinned Locked Moved Plugins
    1.5k Posts 470 Posters 3.3m Views 469 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • GaieusG Offline
      Gaieus
      last edited by

      Also, for the cone, you can truncate the tip and apply round corner only on the top circle. It's a bit of a fiddling around what settings to use but the result will be fine.


      before


      after (hidden edges displayed)

      Gai...

      1 Reply Last reply Reply Quote 0
      • W Offline
        WRipley
        last edited by

        Hi,
        thanks for this great Plugin.
        But i have a problem.
        I have a structure buil also with holes.
        When i round the corners of the whole structure it closes
        my holes on the side where i pushed the form thru the material.
        I hope you know what i mean.
        When i make a hole i start makin a circle on the Material.
        Then i push the Circle thru the material that i get a hole.
        Wehen i then try to round the corners the hole is on one side closed.
        On the other side not.
        Maybe it depends on me.
        Or do you know that problem.
        Thanks in advance
        Best
        Walter

        1 Reply Last reply Reply Quote 0
        • fredo6F Offline
          fredo6
          last edited by

          Problem of closed holes is known but difficult to handle because it is Sketchup closing the hole automatically.

          Just select the face over the hole and erase it. You should see the round corners underneath.

          Fredo

          1 Reply Last reply Reply Quote 0
          • W Offline
            WRipley
            last edited by

            Hi,
            Thanks for you fast answer.
            But i dont know how to erase it. The Eraser tool dont function.
            Im new in SU .... maybe its easy (think so)
            What is an easy way to do it ?
            atb
            Walter

            1 Reply Last reply Reply Quote 0
            • fredo6F Offline
              fredo6
              last edited by

              @wripley said:

              Hi,
              But i don`t know how to erase it.

              Normally, just select the face closing the hole and press Delete.

              Fredo

              1 Reply Last reply Reply Quote 0
              • E Offline
                eastspringdt
                last edited by

                Thanks! it works great!

                1 Reply Last reply Reply Quote 0
                • M Offline
                  martosurf
                  last edited by

                  Is great thanks

                  1 Reply Last reply Reply Quote 0
                  • A Offline
                    arcitek
                    last edited by

                    Someone may want to check into this but I found a conflict with podium 2 plugin and round corners. I had to work through almost 30 plugins to find this. It was on a friend's machine and we noticed he kept getting bugsplats as soon as he would activate round corners. I removed every plugin and started reinstalling every one of them and it crashed when I inserted the Podium 2 folder. Took the folder out, things were fine. Bummer.

                    1 Reply Last reply Reply Quote 0
                    • F Offline
                      flycase
                      last edited by

                      Hi Fredo,
                      I'm trying to use Round Corner in SU8, but any time I will define a corner to round, for example a corner of a cube of 2000x2000x2000mm, Sketchup crashes and switch off..

                      is there a solution for this?
                      Tahnk You very much.
                      Paolo.

                      1 Reply Last reply Reply Quote 0
                      • TIGT Offline
                        TIG Moderator
                        last edited by

                        A cube that size [2m] should be OK... BUT if you then specify a very small radius or excessively large numbers of segments Sketchup/OpenGL can't cope with the tiny faces [<~1mm/0.01sq"] and it fails - sometimes catastrophically. It occurs with many tools - even FollowMe...
                        This tininess is exacerbated when already small rounded edges meet at corners and some 'quarter-hemispheres' are made to join them together, because they will probably have very small triangular facets at their apexes, which might then be 'too tiny' to be created !

                        So I'm guessing that this could be the issue...

                        Try it with a bigger radius and/or fewer segments and see if that works.
                        If so, and you really must have such a tiny radius and/or many segments, you can get around it thus:
                        Scale up the whole cube x10.
                        Apply the edge-rounding [x10 bigger] to it, so this time the tiny face issue is avoided.
                        When you are done you just Scale the cube with it's rounded edges down x0.1.
                        Tiny edges can exist quite happily: it is just the creation of them that causes these issues...
                        🤓

                        TIG

                        1 Reply Last reply Reply Quote 0
                        • F Offline
                          flycase
                          last edited by

                          I tried to reduce corners, and tried do use an offset of 40mm on that cube, but no combination of parameters seems to work.. everytime I will try round corner to work sketcup closes down.
                          Fredo scale works poerfectly.. but I'm starting to think that something is not installed in the right way.. is there a way to remove everything and to re-install?

                          1 Reply Last reply Reply Quote 0
                          • TIGT Offline
                            TIG Moderator
                            last edited by

                            Works fine for me with 2m cube and 40mm radius, 6 segments.
                            If you have many more segments it takes forever to process and eventually the facets will get too tiny at the apexes and won't be made, even 'splat'...Capture.PNGCapturex.PNGCapture1.PNG

                            TIG

                            1 Reply Last reply Reply Quote 0
                            • F Offline
                              flycase
                              last edited by

                              I installed Round edges by Bezier and it works.. I don't know if the calculation engine it's the same..

                              Before this I experinced, one time only, that the tool (round Edge) run!! I started SU and built a cube, than applied the rounding to one edge without changing nothing (30mm offset..) and it worked it out.. after this everything workrd perfectly and no errors occurs during all the trials I made!!

                              closed and reopened SU and again the tool crashed... I've neve been able to let the tool running...

                              Paolo.

                              1 Reply Last reply Reply Quote 0
                              • TIGT Offline
                                TIG Moderator
                                last edited by

                                How many segments does the rounding have ?

                                TIG

                                1 Reply Last reply Reply Quote 0
                                • fredo6F Offline
                                  fredo6
                                  last edited by

                                  @flycase said:

                                  I installed Round edges by Bezier and it works.. I don't know if the calculation engine it's the same..

                                  I would be careful to use this plugin which is quite old and which I don't really maintain (nice to see that it works).

                                  • RoundCorner includes all features of RoundEdges and is more stable.
                                  • The algorithms are also different: RoundCorner uses real arcs of circle (as well as Bezier curves), whereas RoundEdges is based on Bezier curve only.
                                  • RoundCorner does real rounding and treat concave corners. RoundEdge has only the 'sharp corner' method.

                                  Fredo

                                  1 Reply Last reply Reply Quote 0
                                  • F Offline
                                    flycase
                                    last edited by

                                    The rounding have 6 segments, I tried with 3, with 1, with 10...
                                    no differences..

                                    I' still thinking to the only time it worked... it' really amazing...

                                    1 Reply Last reply Reply Quote 0
                                    • F Offline
                                      flycase
                                      last edited by

                                      Tried to follw your suggestions,

                                      placed a cube of 3m and an offser of 40mm.
                                      Again a crash occurs..

                                      I can send the log file generated from the splash manager.. if you think this can be useful...
                                      thank you TIG.

                                      1 Reply Last reply Reply Quote 0
                                      • M Offline
                                        mechblack
                                        last edited by

                                        ![I'm trying to link the edges to the bolt hole bosses with a smooth .250" fillet.](/uploads/imported_attachments/XUtc_RoundedCorners.png "I'm trying to link the edges to the bolt hole bosses with a smooth .250" fillet.") This is an amazing tool! I like the parameters, navigation and selection/deselection through the whole process. Well Done!

                                        Is there any way to use it to fillet cylindrical features to flats? I'm trying to fillet the inside pocket of a block (aluminum) with bolt holes that have bosses that jet out into the pocket, because the axis of the bolt hole is at the intersection of the insides of the pocket. I've looked at a couple of other plugins, but they all seem to gap the fillet along the square boundary containing the arc of the cylindrical feature (like you can see at the top of this part). I suppose I could draw the features square size and round them all with the same size fillet, but this particular part needs to have the boss perimeter at .375", and the adjacent fillets at .250".

                                        Is this the right tool for the job? I am new to this amazing world of modeling. I would also welcome any links or references you have for me to keep the whole process as simple as possible.

                                        Thanks!
                                        Spencer
                                        Manufacturing Engineering Technology Student
                                        Salt Lake Community College

                                        1 Reply Last reply Reply Quote 0
                                        • TIGT Offline
                                          TIG Moderator
                                          last edited by

                                          Using very small dimensions can cause issues as Sketchup/OpenGL cannot form facets of <~1mm/0.01sq".
                                          However, such tiny facets can exist!
                                          I suspect this might be the case here...
                                          If you are making forms with small facets [like the 'apexes' of the 'dished' shapes] then the fix is to Scale up the original object x10, do the processing [remembering to adjust its values x10 too!], when done you Scale the object and the new geometry x0.1 and the facets will shrink to be tiny, BUT they'll be OK - because it's the 'making' of them that's the issue not their actual 'existence'.

                                          TIG

                                          1 Reply Last reply Reply Quote 0
                                          • gillesG Offline
                                            gilles
                                            last edited by

                                            in some cases try follow me tool.


                                            folowme.png

                                            " c'est curieux chez les marins ce besoin de faire des phrases "

                                            1 Reply Last reply Reply Quote 0
                                            • 1
                                            • 2
                                            • 22
                                            • 23
                                            • 24
                                            • 25
                                            • 26
                                            • 73
                                            • 74
                                            • 24 / 74
                                            • First post
                                              Last post
                                            Buy SketchPlus
                                            Buy SUbD
                                            Buy WrapR
                                            Buy eBook
                                            Buy Modelur
                                            Buy Vertex Tools
                                            Buy SketchCuisine
                                            Buy FormFonts

                                            Advertisement