BoxPod
-
@unknownuser said:
Are those stackable? What about temperature isolation? And the "roof" how does the rain goes on that flat surface?
Not stackable by design, but I'm sure it could be. Being totally sealed I see no rain issue, like a shipping container that's sealed and has a flat roof. As for insulation,it may depend where you are using it,indoors or out, good old polystyrene may even be viable as an insulation. The idea however is to use as much recycled plastics/products as possible.
-
Hy Solo, long time no se
I like the design, but to me it seems like a death trap. How did you handle insulation and ventilation? And I don't see any windows, i suggest to implement at least one somewhere. I Presume that you left the recesses in between beds and bathroom for structural purposes, which is clever system, so you could guide the ventilation scoops in those voids as well. I would suggest one way vision window net on the outside, so you can provide privacy in the interior, and still keep the funky graphics on the outside
Have you done preliminary cost assesment?
Nice project, cheers
andrija
-
@andrija posarić said:
Hy Solo, long time no se
I like the design, but to me it seems like a death trap. How did you handle insulation and ventilation? And I don't see any windows, i suggest to implement at least one somewhere. I Presume that you left the recesses in between beds and bathroom for structural purposes, which is clever system, so you could guide the ventilation scoops in those voids as well. I would suggest one way vision window net on the outside, so you can provide privacy in the interior, and still keep the funky graphics on the outside
Have you done preliminary cost assesment?
Nice project, cheers
andrija
There is a vent (above toilet, see last image) I was considering a window, maybe in the door as I do not want to complicate the forming or structure any more than neccessary.
There is lots of space for ventilation/heat as needed and additional vents are easily added depending on what the final use will be.I have done no costing,just basic/rough concept.
-
very nice concept.
-
solo you might have a look at this beautiful project that was an entry for a 70.000$ competition on jovoto. too bad its already finished. you could have participated with the BoxPod....
ROYAL PREDIKSI
Royalprediksi merupakan blog yang menyediakan berbagai prediksi syair sgp, hk, sydney dan pasaran lainnya dan juga menyediakan Live Draw sgp, hk dan sdy
ROYAL PREDIKSI (www.jovoto.com)
-
Beats the hell out of the coffin hotels!
(well done)
-
I once stayed in a very inexpensive rual Mexican Hotel that placed the shower head on the ceiling between the toilet and the sink, Guess the rational was that it was easier to wash everything down.>_<. If it's just a place to crash, windows may not be desirable, but natural light would be nice. You need a way to get into the upper bunk, and may be a small lockable storage cabinet.
Sure beats that room I had in Mexico. There, the idea was to fall asleep quickly so that you did not have to deal with the giant roaches climbing the walls.
-
that's very cool, pete... really like the layout/design.
-
I had a few minutes to make some changes, here is added vents and a window in door, straight SU output.
-
Does it flatpack?
-
No, it's form moulded. However it's very light.
-
I like the idea Pete, and your images of it of course are outstanding. How many square feet total? It's a tad nicer than the modulars (pre-cast concrete correctional cells) that I have been working with lately. You may want to use a combi-unit for the sink/toilet to save on connections and piping space. It will also open up the bathroom portion.
Dean
-
Like it. My wife recently went to help train staff at a hotel. I noticed all the bathrooms were of this kind of design, and were craned in plugged and plumbed in. The rest of the hotel was of more traditional construction. I seem to think Kengo Kuma designed a plastic house but not a micro one. How about a Kalwall panel to make the door with a moulded edge.
-
Well, this is something new. I like very much the concept, the material it's a plastic mass I presume. The insulation method I see for this thing is mineral foam inside the walls. The roof should have a hidden inclination for the water to come down somehow through the wall.
Great one. The images are awesome too
-
@bytor said:
I like the idea Pete, and your images of it of course are outstanding. How many square feet total? It's a tad nicer than the modulars (pre-cast concrete correctional cells) that I have been working with lately. You may want to use a combi-unit for the sink/toilet to save on connections and piping space. It will also open up the bathroom portion.
Dean
Dean, it's roughly 81 sq/ft. I thought about the combi unit but opted against that as I could not see anyone brushing their teeth over a toilet bowl, and I was thinking either PVC or flexi pipe to tie in the plumbing which is very inexpensive.
Insulation of a unit like this would work similar to a picnic cooler, keeping cool in summer or warm in winter.
The plastic used will be at least 50% recycled, durable, water resistant, vandal and graffiti proof, solid and inexpensive.
Another thing is one can charge by the hour or day, electricity can be pay as you go, like the Euro Meter method, but thats a final user issue, I'm more concerned about creating the most cost effective, easy to manufacture product.
Imagine this scenario…
You have travelled from the USA to London for the 2012 Olympics, accommodation is very scarce and pricy, you only need a place to sleep, shower and a secure place to leave you bags and belongings. You are going to be out most of the day, eating at food courts or restaurants, in a pub at night, getting back late to a secure place to sleep and shower in the morning before going out again.
At a price like $30 p/day this could be a very attractive option for most.
-
Neat idea, Pete. I'd add little feet on each corner and the center to facilitate placement via forklift. These could be molded in as an integral part of the design. I could see a semi trailer pulling up to a venue with 5 or 6 on the back (standard trailer is 53' x 8.5'), an off-road forklift sets each one on the gravel/grass - quick and easy! I'd also put a little 2" high "bumper" ridge running horizontally around the top and bottom to add a little strength, and so if the units are bumped into each other the flat sides are not all scratched up.
If cheap enough, they could even be used for temp housing at 2-7 day races, concerts, rallys, you name it. As I think someone already mentioned, it would be best if they were designed to fit on top of one another to be stacked 2-3 units high for storage in off-seasons.
-
Those units need to be collapsible somehow. If the top and bottom were removable and all parts mated into one another you'd have a serious means of transporting large quantities.
Ever see those car roof luggage containers? If the top and bottom of your boxpod became the container with the walls housed within maybe?
It's an impressive concept. The only thing that stands out is the volume they take when idle.
-
Like this:
-
There was a truck here a minute ago?
-
@unknownuser said:
Those units need to be collapsible somehow. If the top and bottom were removable and all parts mated into one another you'd have a serious means of transporting large quantities.
Ever see those car roof luggage containers? If the top and bottom of your boxpod became the container with the walls housed within maybe?
It's an impressive concept. The only thing that stands out is the volume they take when idle.
Collapsable will be a problem as they are form moulded for structural strength as well as having all wiring and plumbing within the shell.
(I edited the image and reposted, sorry about that it screwed with the flow.)
Stackable I agree with, that way you can store it like a shipping container yard.
Advertisement