[Plugin] SurfaceGen (0.9.0b) — 28 April 2012

d12dozr

Heh, here's a truncated sphere, settings shown...this is fun!

Some suggestions:
-When switching to "Equation", change the default settings to something that will work just by pressing "Generate"
-Add a random equation/function generator, perhaps using preset equations
-Add an error message when the equation is invalid, pointing out why its invalid if possible

Like Jean says, just ideas...

dedmin

Diggsey, where have You been so far!! We need You! Keep up surprising Us! Thanks!

d12dozr

Here's a question for you...is there a way to make the SurfaceGen geometry look like the first Meshlab image? I'm using the same equation, and trying to get results like changing the voxel size in Meshlab, but changing the # of cells in SurfaceGen doesn't seem to have the same effect...am I doing something wrong?

Voxel size 0.05
Voxel size 0.01

BTW, I like how the settings are saved for each generated surface!!

pilou

ah very cool!
Topmod and K3dSurf in a same place!
(you can take some formula from K3DSurf

@unknownuser said:

For now, I'm just playing, but I have dreams of making some beautiful math sculptures like Bathsheba Grossmanmakes.

Topmod above is perfect for that
by me

By Jotero

d12dozr

Great links, Pilou! Thank you Nice work on the sculpture, too.

thomthom

Very nice plugin.

pilou

In the V6 don't works

@unknownuser said:

Error Loading File surfacegen.rb
cannot convert Hash into String

Works fine in the V7

Diggsey

Thanks everyone who commented!

@d12dozr
I've no idea how to make such complicated structures as those ones you linked to, but you can get some interesting shapes by just mixing up a few of the built in functions:

sin, cos, tan, sinh, cosh, tanh, asin, acos, atan, asinh, acosh, atanh, atan2, hypot, sqrt, cbrt, log, log2, log10, ln, exp

and constants:

e, pi

@unknownuser said:

When switching to "Equation", change the default settings to something that will work just by pressing "Generate"

I'll just make the default equation something that will work for both modes.

@unknownuser said:

Add a random equation/function generator, perhaps using preset equations

That could be interesting. Perhaps the user could choose a level of complexity and it would use that many operations.

@unknownuser said:

Add an error message when the equation is invalid, pointing out why its invalid if possible

Showing an error would be possible, but it might be difficult to point out where. It depends on how much information ruby gives me. For speed, the equation is converted into ruby code, so I can just eval it for each point instead of running my own interpretter.

@unknownuser said:

Here's a question for you...is there a way to make the SurfaceGen geometry look like the first Meshlab image?

I don't know exactly how Meshlab works internally, but it seems like the voxel size is equivalent to the range of values divided by the number of cells. ie:
voxelSize = (max-min)/cells

I'm surprised it should look so different though, just by changing the voxel size.

@Pilou
I've found the problem. It won't let me pass a hash to WebDialog.new.

thomthom

@diggsey said:

@Pilou
I've found the problem. It won't let me pass a hash to WebDialog.new.

Additionally, SU6 only accepts one argument for model.start_operation.

I've used this wrapper:

<span class="syntaxdefault"><br />def&nbsp;self</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">start_operation</span><span class="syntaxkeyword">(</span><span class="syntaxdefault">name</span><span class="syntaxkeyword">)<br />&nbsp;&nbsp;</span><span class="syntaxdefault">model&nbsp;</span><span class="syntaxkeyword">=&nbsp;</span><span class="syntaxdefault">Sketchup</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">active_model<br />&nbsp;&nbsp;</span><span class="syntaxkeyword">if&nbsp;</span><span class="syntaxdefault">Sketchup</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">version</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">split</span><span class="syntaxkeyword">(</span><span class="syntaxstring">'.'</span><span class="syntaxkeyword">)[</span><span class="syntaxdefault">0</span><span class="syntaxkeyword">].</span><span class="syntaxdefault">to_i&nbsp;</span><span class="syntaxkeyword">>=&nbsp;</span><span class="syntaxdefault">7<br />&nbsp;&nbsp;&nbsp;&nbsp;model</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">start_operation</span><span class="syntaxkeyword">(</span><span class="syntaxdefault">name</span><span class="syntaxkeyword">,&nbsp;</span><span class="syntaxdefault">true</span><span class="syntaxkeyword">)<br />&nbsp;&nbsp;else<br />&nbsp;&nbsp;&nbsp;&nbsp;</span><span class="syntaxdefault">model</span><span class="syntaxkeyword">.</span><span class="syntaxdefault">start_operation</span><span class="syntaxkeyword">(</span><span class="syntaxdefault">name</span><span class="syntaxkeyword">)<br />&nbsp;&nbsp;</span><span class="syntaxdefault">end<br />end<br /></span>

The operation will run slower under SU6 - but at least it runs.

Diggsey

Thanks thomthom, but I've just used a rescue statement so it will fallback on the older version if the newer one fails. The first post has the updated version which works with v6.

TIG

There are also a few error-messages appearing in the Ruby Console that needs traps or begin/rescue forms [e.g. after you explode a special group]...
Some of them relate to your 'recurve' too...
But it's a neat tool

Diggsey

I've tried doing everything possible and can't seem to get any output in the ruby console from either plugin. Can you tell me exactly how to reproduce it?

d12dozr

@diggsey said:

I've no idea how to make such complicated structures as those ones you linked to, but you can get some interesting shapes by just mixing up a few of the built in functions:

sin, cos, tan, sinh, cosh, tanh, asin, acos, atan, asinh, acosh, atanh, atan2, hypot, sqrt, cbrt, log, log2, log10, ln, exp

and constants:

e, pi

Thank you for this, and considering my suggestions too!

TIG

@diggsey said:

I've tried doing everything possible and can't seem to get any output in the ruby console from either plugin. Can you tell me exactly how to reproduce it?
For example...

@unknownuser said:

Error: #<NoMethodError: undefined method curve' for #<Sketchup::Group:0xa9d06fc>> C:/Program Files/Google/Google SketchUp 8/Plugins/recurve.rb:17:in can_select_curve?'
C:/Program Files/Google/Google SketchUp 8/Plugins/recurve.rb:32:in `can_select_curve_selection?'
C:/Program Files/Google/Google SketchUp 8/Plugins/recurve.rb:352

When right clicking a tagged 'surfacegen-group'.
Explode the special surgfacegen-group and right-click gives

@unknownuser said:

Error: #<NoMethodError: undefined method curve' for #<Sketchup::ComponentInstance:0xb440344>> C:/Program Files/Google/Google SketchUp 8/Plugins/recurve.rb:17:in can_select_curve?'
C:/Program Files/Google/Google SketchUp 8/Plugins/recurve.rb:32:in can_select_curve_selection?' C:/Program Files/Google/Google SketchUp 8/Plugins/recurve.rb:352 C:/Program Files/Google/Google SketchUp 8/Plugins/recurve.rb:17:in call'
C:/Program Files/Google/Google SketchUp 8/Plugins/recurve.rb:17

Erase that 'bounds' Instance then Select the surface...

@unknownuser said:

Error: #<NoMethodError: undefined method curve' for #<Sketchup::Face:0xad7783c>> C:/Program Files/Google/Google SketchUp 8/Plugins/recurve.rb:17:in can_select_curve?'
C:/Program Files/Google/Google SketchUp 8/Plugins/recurve.rb:32:in can_select_curve_selection?' C:/Program Files/Google/Google SketchUp 8/Plugins/recurve.rb:352 C:/Program Files/Google/Google SketchUp 8/Plugins/recurve.rb:17:in call'
C:/Program Files/Google/Google SketchUp 8/Plugins/recurve.rb:17

These all relate to 'recurve' reaction to 'surfacegen' entities ?
I did have a surgacegen error but I can't get it to reproduce now

notareal

Nice! Can't wait some more complex math sculptures... and naturally even more functionality, like with K3DSurf.

Little test...

pilou

In the V6
We can draw the "Box" but dialog's window don't opening
No error message, nothing in the Ruby console

Diggsey

@notareal
That's really nice! What's the equation you used?

@TIG
Make sure you have the latest version of Recurve. I fixed that bug with the last update which is why I couldn't reproduce the error. If you ever get the SurfaceGen error again let me know.

@Pilou
Just re-select the group with the select tool. It seems that the SelectionObserver doesn't fire when the selection is changed in code.

TIG

You are right, in that when I get v1.4 of 'recurve' I no longer get these errors with 'surfacegen'. However, I had v1.3 [with SUpv8] and there were no major changes except for making it SUpv6 friendly ?
Anyway... no more error messages... I'll try to break it

Builder Boy

Sponge-like object:

driven

this is great,

some odd behavior on the Mac... when run from plugins (like you should) I get this

Error; #<ArgumentError; Cannot convert argument to Sketchup;;Point3d>
/Library/Application Support/Google SketchUp 8/SketchUp/Plugins/SURFACEGEN_Dir/surfacegen_tool.rb;266;in `add'
/Library/Application Support/Google SketchUp 8/SketchUp/Plugins/SURFACEGEN_Dir/surfacegen_tool.rb;266;in `getExtents'

if I put the surfacegen.rb into the folder do a restart and then load from Ruby Code Editor, I get this

(eval);428; warning; don't put space before argument parentheses
"Run aborted (error has occurred)"
(eval);428; warning; don't put space before argument parentheses
(eval);10; warning; already initialized constant SURFACEGEN_DIR
(eval);11; warning; already initialized constant GRAPH_SIZE
(eval);12; warning; already initialized constant WINDOW_HEIGHT
(eval);13; warning; already initialized constant ATTR_DICTIONARY
"Run aborted (error has occurred)"

but if I restart again and use as_pluginloader.rb to load it I get


/Library/Application Support/Google SketchUp 8/SketchUp/plugins/SURFACEGEN_Dir/surfacegen.rb;428; warning; don't put space before argument parentheses

it works, but has no tool button image...
the dialog keeps disappearing behind SU, but that needs show_modal on Macs
this is a 'normal' load i.e. image-no dialog