Subdivide and Smooth Feature Requests

remus · 19 Apr 2009, 17:24

being ale to crease edge with varying degrees of 'crease' would be cool. i.e. being able to make the crease softer or harder.

princedragoncok · 19 Apr 2009, 18:38

How about a smoove tool which works always perpendicular to the surface/face you are working on. ex. A sphere to which the smoove tool can be applied to from any direction.

Whaat · 20 Apr 2009, 01:59

@remus said:

Being able to flip between subdivide/unsubdivide without undo.

This seems to be a common request. Users seem to be not using proxy subdivision modelling in favour of applying SDS and then hitting the 'undo' button to get back to unsubdivided. This leads me to believe that there are some workflow issues with proxy modelling. Can someone tell me what are the reasons that users do not like to use the low-poly proxy modelling workflow?

Another question I have is this:
Does anyone ever use the 'copy materials' option? It is slow and does not properly interpolate the UV coordinates. I had in mind to fix the UV issue but my preference would be to remove the feature entirely. It will always be slow and I wonder if there is any significant benefit to it. Fixing the UV issue will take a lot of time and I would rather devote time to other features. Any thoughts?

l.frisken · 20 Apr 2009, 03:32

if it automatically applied smoothing when it finished then I reckon more people would use the apply materials option

ely862me · 20 Apr 2009, 09:54

i don t know if u can make a chamfer tool..this will be great and save a lot of work(at last for me)
the only bad thing and decisive is that SU works with triangulation ,and because of this is almost impossible to create chamfer

baz · 20 Apr 2009, 10:08

@ely862me said:

i don t know if u can make a chamfer tool..this will be great and save a lot of work(at last for me)
the only bad thing and decisive is that SU works with triangulation ,and because of this is almost impossible to create chamfer

perhaps 'sketchy bevel' by chris philips would do this for you? It draws chamfers.

baz

ely862me · 20 Apr 2009, 15:06

that is good for flat areas ,,on the triangulated areas it s a mess
this is what i m talking about ..

xrok1 · 21 Apr 2009, 00:34

@unknownuser said:

Another question I have is this:
Does anyone ever use the 'copy materials' option? It is slow and does not properly interpolate the UV coordinates. I had in mind to fix the UV issue but my preference would be to remove the feature entirely. It will always be slow and I wonder if there is any significant benefit to it. Fixing the UV issue will take a lot of time and I would rather devote time to other features. Any thoughts?

it would be great if it worked, i think everyone would use it. if for nothing else than selection sets by material.

utiler · 21 Apr 2009, 22:59

@unknownuser said:

Free or nominal Upgrade to those who bought?

Has this been answered yet......?

remus · 21 Apr 2009, 23:19

Whats so bad about the current SDS that you need a free upgrade to win you over?

utiler · 21 Apr 2009, 23:26

@remus said:

Whats so bad about the current SDS that you need a free upgrade to win you over?

Nothing Remus, just wanting to keep up with the latest release....

Whaat · 22 Apr 2009, 03:35

@utiler said:

@unknownuser said:

Free or nominal Upgrade to those who bought?

Has this been answered yet......?
I really don't know the answer to this. It is too early to say. I really hope we can set up a system on Smustard to provide a nominal upgrade price for those who bought. As far as I know, Smustard is still not set up to do this. I know RickW was looking into this and I intend to ask him what the status is.

utiler · 22 Apr 2009, 04:43

Thanks for the update Dale.....

remus · 22 Apr 2009, 07:36

Sorry for being a bit snappy there andrew, i thought you meant it in 'SDS wasnt worth the cash the first time so we should get a free upgrade' sort of way Thats obviously not the case.

utiler · 22 Apr 2009, 09:55

Certainly not mate..... I wouldn't have spent hours creating an Australian Steel profiles library to upload if it wasn't worth it!!!!!

Bobby Cheung · 1 May 2009, 10:42

Hi, i was wondering how can i add a thickness to a curved object'surface? eg like offsetting it. The reason of asking is let say if i have to creat a mould for a product, and i need to give a thickness to the rapid prototyping machine.

remus · 1 May 2009, 12:19

Have a look at fred06's joint pushpull plugin (you should be able to find it in the ruby forum.) Sounds like it should do what your after.

xrok1 · 1 May 2009, 21:34

@whaat said:

@utiler said:

@unknownuser said:

Free or nominal Upgrade to those who bought?

Has this been answered yet......?
I really don't know the answer to this. It is too early to say. I really hope we can set up a system on Smustard to provide a nominal upgrade price for those who bought. As far as I know, Smustard is still not set up to do this. I know RickW was looking into this and I intend to ask him what the status is.

could you not just have ver-3 and ver-3upgrade as two seperate scripts (products) on smustard?

remus · 2 May 2009, 06:45

Whats to stop someone just buying the upgrade instead of the full version?

xrok1 · 2 May 2009, 18:55

make ver.3up dependant on one of the files from ver.2, maybe the icons or something. hell, i'm sure Whaat could figure something out. i know i don't want to pay full price for an upgrade thats for sure.