[Plugin] Toggle Units
-
..on pc that happens only if fractional or engineering is selected - once i click on decimal (from the toggle units icons) all icons become selectable and everything works..
i think we really need some 'certified mac testers'.. (or they may be left behind)
-
+1 for certified mac testers!
Sorry Edson for that and thank you so much to loose some time for script testing !
-
@matt666 said:
+1 for certified mac testers!
Sorry Edson for that and thank you so much to loose some time for script testing !no problem, matt. it is a pleasure to be of help. could you be more specific as to which is the build to be tested? i looked at the first post of this thread and saw nothing different there.
-
Yep! On Fedo6 advices, I changed the way that script called preferences units...
So we have to try some things...
Open your ruby console, copy and paste code below and can you show me the result please ?toggle_units(1)And
Sketchup.active_model.options["UnitsOptions"]["LengthUnit"]And
var = Sketchup.active_model.options["UnitsOptions"];var["LengthUnit"]= 4And this one (can you replace "VAR" by result of the last code entered, please ?
toggle_units_validation_proc(<VAR>)Another thing : When does error message appears? While start of SU? After clicking on an icon?
Sorry for all these tests, but it's necessary if I want to find the problem!
Thank you Edson! -
matt,
do no be sorry. just keep the tests coming.
see the results in the attached picture. i do not get any error messages. it just does not change units.
cheers.
-
toggle_units(1) works!! Try toggle_units(1), toggle_units(2), toggle_units(3) etc... And take a look in the units window (Windows->Model info->Units), normally drawing unit changes...
So I will post an update soon with toolbar code changed! Thank you Edson ! -
@edson said:
no change, matt. still not working on mac. i click on the icons and nothing changes; it keeps the unit set through model info-->units.
Hi !
I go back on this plugin, with another attempt for Mac users. Edson, Can you try please?EDIT1 : One other (And I hope the last !) update!
-
Ok, I've finished this update! Can you try it, Edson, please? Thank you!
-
matt,
good news from the mac side of life. it works. however, in order to see the change in the info panel i must close it and open it again (not a big problem).
what could be improved is the fact that the icon bar does not reflect the present units chosen. see the picture: i have decimal and centimeters on it but the icon bar is not reflecting it. sometimes it is all gray, others white. the buttons seem to "stick".
but we made some progress.
-
Wow... Strange!
Thank you Edson! We will slowly succeed!Another request, please... A daunting request...
Can you open your ruby console and your units window (in model info), please?
Copy and paste code below in the ruby consoleSketchup.active_model.options["UnitsOptions"]["LengthFormat"]Change unit format, paste the code in the ruby console and give me the result like that :
@unknownuser said:
Unit format (decimal, Architectural) -> result of the code
Can You do that for all SU unit Format please?
The same thing for units length... With this code :
Sketchup.active_model.options["UnitsOptions"]["LengthUnit"]Here is units options in SU/Windows :
Unit Format- Architectural -> 1
- Decimal -> 0
- Engineering -> 2
- Fractionnal -> 3
Unit Length
- Inches -> 0
- Feet -> 1
- Millimeters -> 2
- Centimeters -> 3
- Meters -> 4
Thank you Edson!
-
sorry, max. it may seem clear to you but i am not getting what i am supposed to do. lead me through it, ok?
after i paste Sketchup.active_model.options["UnitsOptions"]["LengthFormat"] what do i do? where do decimal and meters go? with or without quotation marks, etc? and where do i insert the unit options?
write down one of the options and i will figure out the others.
cheers.
-
Sorry
!
Procedure :
For all units format (decimal, architectural, engineering, Fractional) -> N°1 on the picture- Change the format in the unit SU window (N°1)
- Copy, paste and excecute the code in the ruby console (N°3)
Sketchup.active_model.options["UnitsOptions"]["LengthFormat"]- Show me the result of the code in the ruby console Like my last post.
For all units length (Inch, feet, millimeters, centimeters, meters) -> N°2 on the picture
- Change the length in the unit SU window (N°2)
- Copy, paste and excecute the code in the ruby console (N°3)
Sketchup.active_model.options["UnitsOptions"]["LengthUnit"]- Show me the result of the code in the ruby console Like my last post.
If it's too constraining for you, don't hesitate to tell, I understand
Sorry again, Edson!
-
gotcha! is this it?
-
Great ! The only problem is that it's the same thing as Window.... I d'ont understand your (Big) Mac Bug....
Thank you Edson! -
@edson said:
matt,
good news from the mac side of life. it works. however, in order to see the change in the info panel i must close it and open it again (not a big problem).
what could be improved is the fact that the icon bar does not reflect the present units chosen. see the picture: i have decimal and centimeters on it but the icon bar is not reflecting it. sometimes it is all gray, others white. the buttons seem to "stick".
but we made some progress.Just one thing... With this update, can you try this : [floatr:22oduved]
[/floatr:22oduved]- Draw a line
- Create a dimension entity of this line
- Try to change units in the toolbar...
Is the dimension change ?
On windows, dimension changes each time you change units...
-
matt,
yes, the dimensions change. the functionality is now perfect.
however, the buttons stay in "pressed" mode even when you change units. check below: after testing the meter button, i clicked on cm and then mm. all of them stayed as if they were active. would there be a way for making only the active unit's button to show as such?
-
Ok cool! Thank you!
Do you have any error in the ruby console? -
no errors.
-
Sir
Matt666 your Plugin Toggle Units is very useful and I use it all the time when I get marine vessels in metric and diving equipment in Imperial.
Just one question, would it be possible to add up and down precision buttons, so with a mouse selection, one could change the precision of the display either up or down as required?
Thanks in advance and again thanks for the very useful plugin.
Ken
-
Hi Ken.
in the first post, a new tool has been added. The last with 11 icons.
Enjoy !
Advertisement