Good evening,
for the width lines it's not possible.
I will soon publish a new version, including a Spanish version translated by Diego Rodriguez. The new version adds faces to the lines drawn.
Can work on inner edges are groups and components.
It is possible to include a German version. Here are the lines to translate

       $aa_01 = "Length "
  	$aa_02 = "TAB to modify parameters "
  	$aa_03 = "Select the end of the edge == TAB to modify colors "
  	$aa_04 = "Color on axis X "
  	$aa_05 = "Color on axis Y "
  	$aa_06 = "Color on axis Z "
  	$aa_07 = "Color 45 degree "
  	$aa_08 = "Color other axix "	
  	$aa_09 = "Color single "
  	$aa_10 = "Color "
  	$aa_11 = "Select the start of the edge == TAB to modify colors "
  	$aa_12 = "No color "
  	$aa_13 = "No RGB" 
  	$aa_14 = "RGB "
  	$aa_15 = "TAB to modify colors "
  	$aa_16 = "By Layer "
  	$aa_17 = "No selection, do you want apply\nthe operation to all entities? "
  	$aa_18 = "Stippling "
  	$aa_19 = "% or cm "
  	$aa_20 = "Adapt length "
  	$aa_21 = "Color 1 "
  	$aa_22 = "Color 2 "
  	$aa_23 = "There are several instances\nDo make unique instance?\nOtherwise the definition will be modified... "
  	$aa_24 = "Angle length "
  	$aa_25 = "Angle color "
  	$aa_26 = "Edge color "
  	$aa_27 = "ColorEdge "
  	$aa_28 = "Draw Color Edge "
  	$aa_29 = "Draw edge by color by vector "
  	$aa_30 = "Edge single color on select "
  	$aa_31 = "Edge color by axis on select "
  	$aa_32 = "Modify select in dotted line "
	$aa_33 = "Color Edge by click "
	$aa_34 = "Dotted line by click "
	$aa_35 = "Colored angle by click "
	$aa_36 = "Colors blend "
	$aa_37 = "Color select "
	$aa_38 = "Colored angle "
	$aa_39 = "Dotted line"
	$aa_40 = "By default"
	$aa_41 = "Active layer"
	$aa_42 = "All"
	$aa_43 = "Delete"
	$aa_44 = "Color layer"
	$aa_45 = "Keep"
	$aa_46 = "Whithout"
	$aa_47 = "Invisible"
	$aa_48 = "Yes"
	$aa_49 = "No"
	$aa_50 = "Selection of colors to use"
	$aa_51 = "Valid and save"
	$aa_52 = "Valid"
	$aa_53 = "Uncheck all"
	$aa_54 = "Chech all"
	$aa_55 = "Cancel"
	$aa_56 = "Color choice "
	$aa_57 = "Add face "
	$aa_58 = "Inputbox setup "	
	$aa_59 = "Inputbox setup..........................................You must before colors selected "	
	$aa_60 = "Language choice "
	$aa_61 = "List chosen colors "
	$aa_62 = "Parameters "
	$aa_63 = "Yes|No"

ChrisP

In the script, it's just the time allowed to detect the double click

It works, you can use onLButtonDoubleClick without calling onLButtonDown & onLButtonUp
The delay time is 0.2 it works well for me but it is possible that changes depending on the computer

For SU8

class TestTool

    def onLButtonDown(flags, x, y, view)
        puts "-" *25
        puts ;onLButtonDown
        @ip = UI.start_timer(0.2,false){call_method(flags, x, y, view)}   
    end
    def onLButtonUp(flags, x, y, view)
        puts ;onLButtonUp
    end

    def onLButtonDoubleClick(flags, x, y, view)
        UI.stop_timer @ip
        puts ;onLButtonDoubleClick
        puts "Call method for onLButtonDoubleClick"
        puts "-" *25

    end     
    def call_method(flags, x, y, view)
            puts "Call method for onLButtonDown"
            puts "Call method for onLButtonUp"
        puts "-" *25
    end
end

Sketchup.active_model.select_tool TestTool.new

For SU6 & SU7

class TestTool
    def onLButtonDown(flags, x, y, view)
        puts ;onLButtonDown 							# for test      
        call_method(flags, x, y, view)
    end
    def onLButtonUp flags, x, y, view
        puts ;onLButtonUp							# for test
    end
    def onLButtonDoubleClick(flags, x, y, view)
        UI.stop_timer @id
        puts ;onLButtonDoubleClick						# for test
        puts "Call method onLButtonDoubleClick"					# for test
        puts "-" * 25 								# for test       
    end     
    def call_method(flags, x, y, view)
            start_time = Time.now
            elapsed_time = 0
          	loop do
                   elapsed_time = Time.now - start_time                         # for test
                   puts elapsed_time     
                  	if elapsed_time >= 0.20   				###### delay time ######
                                @id = UI.start_timer(0,false){
        			puts "Call similar method for onLButtonDown"
                    		puts "Call similar method for onLButtonUp"
                    		puts "-" * 25					# for test
                    		}                  
                    	break
                  	end
          	end    
    end
end

Sketchup.active_model.select_tool TestTool.new

ChrisP

Thanks Jim

What do you think about this

class TestTool
    def onLButtonDown flags, x, y, view
        puts "-" *25
        puts ;onLButtonDown
        @id = UI.start_timer(1,false){call_method(flags ="single", x, y, view)}  
    end
    def onLButtonUp flags, x, y, view
        puts ;onLButtonUp
    end

    def onLButtonDoubleClick flags, x, y, view
        UI.stop_timer @id
        puts ;onLButtonDoubleClick
       call_method(flags ="double", x, y, view)
    end     
    def call_method(flags, x, y, view)
        if flags == "single"
            UI.stop_timer @id            
            puts "Call method for onLButtonDown"
            puts "Call method for onLButtonUp"
        else
            puts "Call method for onLButtonDoubleClick"
        end
        puts "-" *25
    end
end

Sketchup.active_model.select_tool TestTool.new

should be able to reduce the UI.start_timerto less than 1 second....

Dan is to prohibit the use of onKeyDown ()and onkeyup ()when a user double clicks the Left Mouse Button.

As Jim says, the solution is perhaps to calculate the delay between two onKeyUp (), if the delay is small consider that a double click to invoke a method equivalent onLButtonDoubleClick. if not call the method onKeyUp () and / or onKeyDown ()

Hi,

In class Tool, Is it possible to disable the method OnLButtonUp or OnLButtonDown when you call the method onLButtonDoubleClick

Thank you in advance for your answers

ChrisP

in reality, I do not know
but
puts $LOADED_FEATURESreturn nil
puts $" return that

By cons no return for files rbs

http://www.zenspider.com/Languages/Ruby/QuickRef.html#19

ChrisP

$" This pre-defined variable, an array contains the module names loaded by require.

@+

@pafpro said:

Je me suis inscrit, mais malheureusement j'ai très rarement reçu des réponses à mes problèmes.
Suppositions : soit il n'y a pas encore de personnes assez calées, soit les gens viennent que pour leurs problèmes et se désintéressent de ceux des autres. Je suis peut être un peu dur, mais le but d'un forum est de trouver des solutions pour soit ou pour les autres, pas juste poser des problèmes, sinon je n'y vois pas d'intérêt. Ou alors les sujets que j'ai ouvert sont sans intérêt!!!
Bref, le forum est bien fait, l'idée est vraiment sympa, on y trouve des choses intéressantes, il est très complet, en français, il ne manque plus qu'un peu plus d'échanges.

Salut pafpro

Je viens de regarder sur Bibliod... Tu as en fin de compte la réponse dans ta question...
Tu as ouvert 9 posts, pour 2 il n'y a pas eu de réponses... Pour les 9 posts il y a eu 57 réponses.
Tu as posté 33 fois JAMAIS EN DEHORS de tes propres sujets... ca veut dire que tu n'as jamais répondu à l'interrogation d'un autre membre.
Il me semble que dans ces conditions il est difficile d'exiger plus "d'échange" si tout le monde adopte le même principe.
Ce n'est pas tout à fait l'idée que l'on peut se faire d'un fonctionnement communautaire.
Ceci dit sur le forum, on essayes toujours de répondre dans la mesure du possible, en fonction du temps et des compétences de chacun, alors si il y a eu un loupé et cela peut arriver, nous en sommes désolé.

La meilleur façon de recevoir c'est de donner...

@+
Christophe

[flash=800,600:3blf0ado]http://content.screencast.com/users/c.plassais/folders/Jing/media/b2d1840e-dcf4-4c4f-a71b-8de7ea7e272c/blend.swf[/flash:3blf0ado]