@chris fullmer said:
You said "you believe" you've done...please double check to make sure that you've done them. If you have reverse picker checked, then uncheck it. If its not checked, then check it. But please try it again, just to be sure
Chris
sir, I've uninstalled and removed sketchup and its folders in my pc. then I reinstalled it, and viola, it's working correctly.
tnx
@chris fullmer said:
In SketchUp, go to Windows > Prefernces > OpneGL and check the boc Correct reversed picking driver bug. That should fix it.
You mgiht also want to update your video card drivers. They might be outdated?
Chris
I believe I've done those stuffs too..
**I have problem selecting faces in my desktop pc. I can't normally push/pull faces nor apply materials directly, instead of sketchup selecting the faces I am suppose to select, it is selecting the other faces, which ruins my sketchup model. hope you could help me out.
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090206-1234)
Language: English (Regional Setting: English)
System Manufacturer: ECS
System Model: 945GCT-M2
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) D CPU 2.66GHz (2 CPUs)
Memory: 1024MB RAM
Page File: 416MB used, 2047MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Card name: ATI Radeon X1300/X1550 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor (0x7143)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_7143&SUBSYS_30001787&REV_00
Display Memory: 1024.0 MB
Current Mode: 1024 x 768 (32 bit) (75Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6925 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 2/26/2009 05:41:10, 325120 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 2/26/2009 06:58:57, 3565568 bytes
Device Identifier: {D7B71EE2-3203-11CF-3A6F-0A10A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x7143
SubSys ID: 0x30001787
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_B ModeWMV8_A ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run]**
I can't practice either Google Sketchup 6 of Google Sketchup 7 on my laptop. It used to work then but suddenly an error came and it kept going and going like that even though I tried to install and re-install.
here's the prompt from my Windows Vista OS laptop
SKETCHUP APPLICATION HAS STOPPED WORKING
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
damn, I really need to learn Sketchup, I need it in my daily job, lolz. How could I practice if it is not working in my laptop. Somebody help me...tnx. 