3D Truss Models

pilou

First glance! (must be refined)

Veuillez sélectionner l'un des types de fermes suivants:

Commun en W - Tunnel - Mono-Pente - Ciseaux - Empennage - Double-Pente
Corde d'Arc (?) - Arceau de Barrique (?) - Polynésien - Bombé - Cathédrale - Plateau (?)
Simple Ciseau - Simple Cathédrale - Shed - Voûte En Berceau (?) - Tunnel à la Mansart - Caisson
Treillis - Cathédrale Symétrique - Studio en Berceau - Double Inversé - Corde Parallèle - Charpente

Remarque: Les types de ferme Shed, Arceau de barrique, Studio en Berceau et Double Inversé sont en cours de développement et ne sont pas encore disponibles.

medeek

Version 2.1.1 - 12.04.2017

Enabled a graphical user interface for advanced options of roof trusses.

pilou

new refinement!

Commun ( Classique en w) - Grenier( Habitable) - Mono-Pente - Ciseaux( Entrait Retroussé)- Empennage ( à coyeau) Double-Pente ( Asymétrique)
Corde d'Arc (Arc) - Arceau de Barrique (Arc triangulé) - Polynésien ( tropicale)- Bombé ( entrait retroussé variante ou Polonceau ) - Cathédrale - Plateau(Double ferme articulée)
Simple Ciseau - Simple Cathédrale - Clergé (Contemporaine ) - Voûte En Berceau (En voute ) - Grenier Surélevé ( à la Mansart)- Caisson ( à entrait décalé)
Plat ( poutre treillis )- Cathédrale Symétrique ( treillis à deux pentes) - Studio en Berceau ( à entrait décalé) - Double Inversé ( double articulée) - Corde Parallèle - Charpente

medeek

I am trying to understand how the Mac .plist file works. Is it similar to the registry? I have a client that is having some trouble with registering (inputting their serial into the global settings) and having their system save the serial number.

Unfortunately, I don't own a Mac so I am not much help. Does anyone use the plugin on a Mac and have had similar problems with saving the serial number? Where does one go to manually edit the .plist file and enter in the serial number manually.

glro

@medeek said:

I am trying to understand how the Mac .plist file works. Is it similar to the registry? I have a client that is having some trouble with registering (inputting their serial into the global settings) and having their system save the serial number.

Unfortunately, I don't own a Mac so I am not much help. Does anyone use the plugin on a Mac and have had similar problems with saving the serial number? Where does one go to manually edit the .plist file and enter in the serial number manually.

not only that
i had the same questions
so i bought a mac: https://en.wikipedia.org/wiki/Mac_Mini
sheap, you can use windows mouse, keyboard and screen
there are a few things to modify in the ruby code por windows, to make it work on a mac

medeek

I am working on adding the heel blocking since it is an option listed in the advanced options.

So far there has not been much call for this feature but a few people have inquired so I figured we might as well add it in for completeness. The red coloration is for clarity in the image above.

I will probably add the option to allow for venting holes since this is fairly typical in my neck of the woods.

pbacot

Very important. Sometimes the heel blocking, when taller, is a truss manufactured square that might have sheathing.

medeek

@pbacot said:

Very important. Sometimes the heel blocking, when taller, is a truss manufactured square that might have sheathing.

I agree, I was investigating this a while back but I'm not sure yet what is standard practice, there could be a number of ways of handling this.

pbacot

Those look nice. I think sometimes the truss blocking has a diagonal which would make it effective (but the engineer will want plywood on it anyway it seems). You can have the truss all the way to the top or the method you show allows (1) continuous plywood gets nailed to the top of the truss block and the solid block provides the shear nailing (2) sometimes decorative rafter tails are added which need to pass through the space above the truss block.

medeek

Featured on the SketchUp Extension Inspection:

pilou

Very enlighting video!

else (Always : https://trussfr.weebly.com
Truss Type = Type de Fermes
(not sure to translate all names of this little list of part of trusses)
King Post
Queen Post
Fink
Howe
Fan
Mod Queen
Double Fink
Double Howe
Mod Fan
Triple Fink
Quad Fink

Out-to-Out Span = Portée Hors tout
Top Chord Angle = Angle de Corde Supérieure (?)
Overhang Left = Porte-à-faux Gauche
Overhang Right (Same as Left) = Porte-à-faux Droit (Identique au Gauche)
TC Size = Taille TC (? à définir)
BC Size = Taille BC (? à définir)
Web Size = Taille (?)
Ply Thickness = Epaisseur du Pli
Raised Heel (No, Yes) =Talon surélevé (?) ( (Non, Oui)
Heel Heigh = Hauteur du Talon (?)

Bldg.lenght = Longueur Bâtiment
Truss Spacing = Espacement de Ferme
Gable End Trusses (Yes, No, Front) = Poutrelles d'extrémité (Oui, Non, Face Avant)
Gable Stud Spacing = Espacement Goujons de Pignon (?)
Adv. Roof Options (Yes, No) = Options Avancées de Toit (Oui, Non)

PS
Does the Messages' window data is self-adapting to the length of words ?

medeek

Thank-you Pilou, I will add these phrases into the language file.

Yes, the SU menu automatically adjust for the length of the words so even though French is often more verbose than English it does not matter. I've noticed though that Russian has some problems rendering in the SU menus.

I would have liked to see the video dive into the advanced menus more but I realize there is far too much material to cover in such a short video.

pilou

@unknownuser said:

Yes, the SU menu automatically adjust for the length

Excellent!

What is BC and TC size ?

Minor Roof Family = Famille de Toit Secondaire

Gable Dormer = Lucarne de Pignon
Hit Dormer = Lucarne de Toit
Shed Dormer = Lucarne de Hangar
Gable Roof Minor = Pignon de Toit Secondaire (?)
Hip Roof Minor = Lucarne de Toit Secondaire (?)
Dutch Gable Roof Minor = Pignon de Toit Hollandais Secondaire (?)

The (?) does not signify that is forcefully false but can maybe be enhanced!

Else works fine!

medeek

BC = Bottom Chord
TC = Top Chord
Web = Internal (web) members of truss

pilou

Thx for the Infos!

medeek

The license registration module was causing some problems in isolated cases so I've released a sub-rev. 2.1.1b to address that issue.

If you are trying to enter in your serial number and it does not appear to take, first verify that you are not entering in any leading or trailing white spaces if that does not solve the problem you may be encountering the issue at top, in that case download the latest version which should address the issue fully.

pilou

Valley set chest => Panel de Noue

Stepdown Hip Set => Panel de Panne de Rive Inclinée

Terminal Hip Set => Panel de Sablière

Northeast Hip Set => Panel de Linçoir

Metal plate connectors = Connecteur Métallique Plat
Gusset = Gousset

Web = Membrure
Web = Fiche & Contre-Fiche

in this following Schema "Chantignole" is false : must be "Arbalétrier" !

medeek

This week has been a bit tough for me to get any meaningful work done on any of the plugins, too many Christmas concerts, parties etc... but I guess its for the better. This weekend I will try to get out the update for the heel blocking and an update on the translations.

medeek

Version 2.1.2 - 12.18.2017

Enabled vertical and angled heel blocking within the advanced options for truss roofs.

If you choose to enable vent holes the heelblock menu will prompt for the hole diameter. The vent hole algorithm will place vent holes in the heel blocking per the truss spacing:

< 12 in. = 1 vent hole
< 16 in. = 2 vent holes
16 in. or greater = 3 vent holes

Let me know if this makes sense, I can always modify it to meet any criteria. If this sort of thing varies a lot per locale I can also make it more user definable.

medeek

This type of heel blocking is very typical in my locale (Western Washington State):

View model here:

3D Warehouse

3D Warehouse is a website of searchable, pre-made 3D models that works seamlessly with SketchUp.

(3dwarehouse.sketchup.com)