BuildEdge PRO is Here!!
-
Ergonomy suggestion : why not an automatic selection of the closed path of walls ?
Some avoid clicks and a house in 30 seconds!
-
Hi guys,
Sorry, haven't been by for a while, but here are a couple answers!
@juju said:
A quick unanswered question from the buildedge website:
"Mark Sloan 2 months ago
I just purchased BuildEdge Pro with much anticipation, to use in my workflow with Skalp to quickly develop construction documents. To my dismay, I've found that while solid objects, such as floors, hatch properly using a Skalp section, Walls do not. It appears this is because walls are not solid objects (no top surfaces). This ultimately means no hatching of floor plans in Layout, which would be the next logical step for using BuildEdge Pro in a designer's workflow. Do you have any suggestions or future plans to improve Build Edge Pro's use in a workflow with other plug-ins/extensions, such as Skalp. The two would be a killer combination working together."Has this issue been resolved?
I am not sure, to be honest. Last I heard, the Skalp guys were going to take a look. Unfortunately, there is not a whole lot we can do from our end (other than completely change how we draw walls... which is not something that we are excited to do...). Hopefully, they can figure how to make solids from our geometry and we can play nicely together, once again!
@juju said:
A quick second question:
It seems that the Buildedge Pro license is perpetual and includes all future updates, is this correct?With the purchase of a seat of BuildEdge Pro, all minor releases will be available for free. At some point in the future (though I do not know exactly when), we will offer a major update. At that time, updating to the new version will have a nominal cost, though I am not sure exactly how much that will be. I should say that, at this point, we are working on additions to the current version (minor updates) and do not, yet have a plan for our next major release.
@pilou said:
Ergonomy suggestion : why not an automatic selection of the closed path of walls ?
Some avoid clicks and a house in 30 seconds!I like the way you think! We are working on "Auto-outline" commands for floor and roof input. Keep an eye out for updates on our progress!
Thanks, all!
Aaron -
Hey, I'm trying to buy the plugin Buildedge Pro, but the website is out, can you send me the link please?
Thanks -
The BuildEdge site address is http://www.buildedge.com.
However, it looks like the product may be dead?
You may be able to purchase a license through their [url=https://keymark.zendesk.com/hc/en-us/categories/200077699-BuildEdge-Pro-for-SketchUp:r6cketoc]customer support site[/url:r6cketoc].Does anyone know what happened to BuildEdge?
-
The brains behind BuildEdge joined SketchUp...
-
Interesting. It seems that the result of hiring great developers has been to stop development of plugins, and not clear what benefits are resulting. I'm glad if the person involved attained their goal however.
-
@pbacot said:
Interesting. It seems that the result of hiring great developers has been to stop development of plugins, and not clear what benefits are resulting. I'm glad if the person involved attained their goal however.
Are you refering to Chris and Thomthom?
-
@rich o brien said:
The brains behind BuildEdge joined SketchUp...
I didn't know that. Makes me hope something like that will be in the next SU.
I usually keep my hopes for new features down but one can't help wishing... -
He was in London. You probably crossed paths.
Sent from my iPhone using Tapatalk
-
@juju said:
A quick unanswered question from the buildedge website:
"Mark Sloan 2 months ago
I just purchased BuildEdge Pro with much anticipation, to use in my workflow with Skalp to quickly develop construction documents. To my dismay, I've found that while solid objects, such as floors, hatch properly using a Skalp section, Walls do not. It appears this is because walls are not solid objects (no top surfaces). This ultimately means no hatching of floor plans in Layout, which would be the next logical step for using BuildEdge Pro in a designer's workflow. Do you have any suggestions or future plans to improve Build Edge Pro's use in a workflow with other plug-ins/extensions, such as Skalp. The two would be a killer combination working together."Has this issue been resolved?
@pixero said:
@rich o brien said:
The brains behind BuildEdge joined SketchUp...
I didn't know that. Makes me hope something like that will be in the next SU.
I usually keep my hopes for new features down but one can't help wishing...I'm hoping the issue with using SKALP gets resolved and, yes, also hoping for greater things in the next SU PRO version.
-
Hi all,
Yes, it is true, I have accepted a Sales Engineering role at SketchUp. So far it has been great and I am very excited to be even closer to the software that I love using and talking about!
As for BuildEdge, it is still being sold, but, for now, they are only selling over the phone. I don't know what the plan is for BuildEdge, moving forward, but I have truly enjoyed the opportunity that Keymark (the company that created BuildEdge) has given me to both create new software and be involved in the SketchUp community, professionally.
Cheers!
Aaron -
Well done, Aaron! Looking forward to maybe meeting and discussing things with you at Basecamp next year!!
-
@aarondietzen said:
Hi all,
Yes, it is true, I have accepted a Sales Engineering role at SketchUp. So far it has been great and I am very excited to be even closer to the software that I love using and talking about!
As for BuildEdge, it is still being sold, but, for now, they are only selling over the phone. I don't know what the plan is for BuildEdge, moving forward, but I have truly enjoyed the opportunity that Keymark (the company that created BuildEdge) has given me to both create new software and be involved in the SketchUp community, professionally.
Cheers!
AaronSo Buildedge software (at least the SketchUp section thereof) hasn't been sold to SketchUp/Trimble?
-
Andrew, I would say that we are long overdue to hang out! I believe I owe you a pint or two!
Juju, you are correct! BuildEdge is still completely owned by Keymark Enterprises. I chose to leave for a job at SketchUp. The software was not mine to bring, so it stayed where it was.
-
I've been trying to two days to contact BuildEdge to purchase a license. There is no phone number I could find and clicking on either the email link (which works but I get no reply) or the live chat link (constantly told no one is available to chat) leads me to believe that as of now, November 15-16, they are not communicating and likely not accepting orders.
Anyone have a suggestion?
Thanks,
Allen
-
I solved the problem and perhaps this will help others.
Call the Keymark office in Boulder. They will take your credit card info over the phone and then once cleared, the tech support folks will send you the authorization code by email.
Some additional info
- They are still working on BuildEdge and hope to release something next year.Although dont know what that means.
- Sketchucation is the site to find any updates.
- You can install it on two machines but you have to shut down one before you can start the other. So one machine in the office and one at home is ok povided you remember to shut down one before starting the other. Too complicated so I bought a second copy and dont have to remember to shut down before I go home.
Advertisement