Condoc Tools: Thoughts? Opinions?
-
@juju said:
I am still struggling with the thought of parting with $150 and again so every year thereafter, not too keen on that.
It all comes down to: 1. does his workflow fit you and your projects AND 2. do you think his tool is going to save you more than $150 every year?
For me it's:
-
No, I prefer an Outliner based workflow with a hierarchy of named objects. I started using it 5 years ago and it just fits me and is flexible enough to fit any project I have.
-
No, I don't have problems with manually setting up 4 elevations and 2 sections and a few floorplans. I don't mind spending a few more minutes to do so. Also, you can easily set up a scrapbook of your own to do something similar. I tried it once but every project has it own demands so I never used it again.
To be honest: asking $150 every year for the above to me is ridiculous. Better split that amount up and donate every year to TIG (SectionCutFace), ThomThom (selection toys), Fredo (FredoScale, JointPushPull) and maybe several others that have made tools you use every day and with those tools you will gain much more time ($150 worth) and joy/fun at work in Sketchup than by using Condoc.
just my humble opinion.
-
-
@kaas said:
@juju said:
I am still struggling with the thought of parting with $150 and again so every year thereafter, not too keen on that.
It all comes down to: 1. does his workflow fit you and your projects AND 2. do you think his tool is going to save you more than $150 every year?
For me it's:
-
No, I prefer an Outliner based workflow with a hierarchy of named objects. I started using it 5 years ago and it just fits me and is flexible enough to fit any project I have.
-
No, I don't have problems with manually setting up 4 elevations and 2 sections and a few floorplans. I don't mind spending a few more minutes to do so. Also, you can easily set up a scrapbook of your own to do something similar. I tried it once but every project has it own demands so I never used it again.
To be honest: asking $150 every year for the above to me is ridiculous. Better split that amount up and donate every year to TIG (SectionCutFace), ThomThom (selection toys), Fredo (FredoScale, JointPushPull) and maybe several others that have made tools you use every day and with those tools you will gain much more time ($150 worth) and joy/fun at work in Sketchup than by using Condoc.
just my humble opinion.
Couldn't have put it better. There are tools that simply fit your workflow by enhancing thing in sketchup. There are other tools that make you have specific workflows. I embrace the first gladly, I have to think a lot on the tool's benefit to embrace the second.
-
-
Do you know what guys. This is where I feel there is a gap in SU.
As SU is such an all rounder tool. There is space for people to make it towards specific markets or areas of activity.
The mantra for architecture is: you model a building and all the tedious and repetitive process is automatically created for you. SU is the best for modelling but we fight a lot to make all the necessary boring steps towards construction. I've put my own method up, you've put your own. There are a lot of methods, one for each one and no method is known enough. So there is space for all those want to be BIMs that impose the "right" method to the people that still try to find their own...
We should start some way of collecting specifics about our own methods for specific architectural tasks, so we could learn from each other. THere is the woodworkers subforum here, yet architects have no specific knowledge center.
Shouldn't we have one?
The Architects Forum?
All that knowledge would be centralized a specifically moderated there...
What do you think?
-
I've been saying for years there should be an Architecture sub-forum... So I'm a big yes on that.
-
There's been a construction docs discussion. That should be sufficient. The discussion rises and falls with different innovative or pioneering examples, and occasional new BIM packages. From experience an "architecture" forum mostly attracts students and trolls.
I think there's room for condoc plugin packages--just because a certain one doesn't fit with your method doesn't devalue the concept. If you like what you are doing then...never mind. Still interested in checking this one out--if not to buy then for ideas.
-
I'm not saying this is interesting or not. I'm just saying this might be as good as what me Krisidious you or others might be willing to share and could be discussed as collective knowledge. Maybe it would be a forum where Condocs would shine above everything else, I don't know, but the specifics of architecture, make it a top modeling discipline inside sketchup capabilities and one that sketchup is being developed to specialize in. Layout and 2014 Classifier, besides all splash screens have architectural models... many people here are architects...
-
Close to 50% of the membership is architecture.
-
I have to say I agree with the sentiments expressed here.
- I too use a similar system to what you all have described. I have one model and one layout file inside of a template project folder. I only need to change a few file names to have my new model already connected to layout with sections and elevations and floor plan levels.
- It is very vague as to what you get.
- I hate subscriptions too... I understand the money making part. I'm a capitalist. But charge one price for your product and charge me again for improvements or new features.
I also wanted to add that TIG made a script for me that creates interior elevations with architectural detail tags.
http://sketchucation.com/pluginstore?pln=ElevTag
Doesn't seem like you can download from there. Maybe we should ask Tig if ever published it.
-
I'd love it as a place to discuss theory and get mentor type help from the older architects.
-
I, for instance, when trying to help others here, fall into the mistake of thinking as an architect sketchup modeler. This frame of mind also alters the perspective I have over the software and how I look at plugins and search for stuff in the forums.
It's like a kind of a filter I put in everything and that has guided me and my workflow with sketchup in the past 2/3 years I've been using it daily. I've developed this by patiently look at the forums, while working and trying to solve my problems with the info gathered here randomly. There's so much info here but it takes dedication just to grasp a part of it.
Having an architectural subforum would help newcomers focus, would help helpers help. Would contextualize things. If you enter on Architecture Subforum to question something, you wouldn't have to explain your background, that would be cleared out and everybody would know that your question and everyone's answer is trying to go towards similar objectives.
How wouldn't that be useful if half the post subject would be already implied?
There is also a matter of Students and Trolls. I don't really know what you mean by the later, but students would be most welcome...
-
I'm Anti-Troll and Pro-Gargoyle when it comes to Architecture.
-
Oh OK. Give it a try. I think it will be better here, if about how to use the software. I'm just thinking of other forums I thought would be such great discussions, but were dominated by cranks wanting to tell you what to think and students wanting someone to think for them. Seemed the word "Architecture" was the attractant.
-
The Architecture industry does seem to draw the know-it-alls...
-
It does, in fact all the world is an architectural savant, specially clients! It seems to me I'm the only one having doubts on my projects!
-
I am getting ready to jump into the SU architectural process. Over the years, I have tried Revit, ACad architecture 2010, Archicad and Softplan. All do great 3d houses. It gets very complicated when you try to make construction documents from that. I usually end up importing to 2d cad to finish.
So what interests me about condocs is that, he has already thought through that process and set it up. One less thing that I have to figure out when I make the switch to SU. I have to be able to be productive almost immediately. So if anyone is 'using' the software and has a review, that would be useful to know.
I also have to wade through information looking only for the architectural applications. I dont care about 3d monsters and I dont like videos about how to draw a house in SU by people that dont know about building a house.
I also do not like subscriptions, which is why I cant and wont go back to ACAD.
I am looking forward to the forum exchange. -
The relevance of this may have passed but....
I have been using ConDoc Tools since January - the approach and model organisation concept work great for me, very logical and helps me keep track of things really well. When the software works it works well, when it doesn't it is a right royal pain in the **s. The is pretty much zero support. There is a dedicated 'professional' forum - http://www.suexch.com but pretty much nothing ever gets replied to and unless someone starts being publicly negative and kicking up a stink nothing happens. I tend to find Layout pretty flaky anyway (on a mac) so that does not help.
In a nutshell - nice try but no cigar!
I really really wanted the plugin to work - it seemed like a panacea at the time but its just pretty random so the approach and org time payoff are negated by the amount of tim you have to troubleshoot a black box.
-
Thanks for the feedback! Rather than directly commenting on past V1 posts, I want to reinvigorate the conversation by providing an extended trial license for CONDOC Pro V2. Please know that you will only get value out of the CONDOC Tools if you have SketchUp Pro 2014/2015, watch our tutorials, and stick to the model organization system. Don't worry, in the download package there are some sample projects to play with.
Watch required tutorials http://www.condoctools.com/support
Download everything you need for your SketchUp version at the following links...
SU2014, https://dl.dropboxusercontent.com/u/9255258/ConDoc%20v.2%20-%20SketchUp%202014.zip
SU2015, https://dl.dropboxusercontent.com/u/9255258/ConDoc%20v.2%20-%20SketchUp%202015.zipThe trial license expires September 1, 2015. After that, you can still access a free trial of ConDoc V2 perspective tool at wwww.condoctools.com. 81bd27bdc146994a9a1aad2095868fc4
I am specifically interested in your feedback on the value of the tools, template, layering system, workflow, and SketchUp standards that CONDOC provides. Let me know what you guys think!
-
@mbrightman said:
Thanks for the feedback! Rather than directly commenting on past V1 posts, I want to reinvigorate the conversation by providing an extended trial license for CONDOC Pro V2. Please know that you will only get value out of the CONDOC Tools if you have SketchUp Pro 2014/2015, watch our tutorials, and stick to the model organization system. Don't worry, in the download package there are some sample projects to play with.
Watch required tutorials http://www.condoctools.com/support
Download everything you need for your SketchUp version at the following links...
SU2014, https://dl.dropboxusercontent.com/u/9255258/ConDoc%20v.2%20-%20SketchUp%202014.zip
SU2015, https://dl.dropboxusercontent.com/u/9255258/ConDoc%20v.2%20-%20SketchUp%202015.zipThe trial license expires September 1, 2015. After that, you can still access a free trial of ConDoc V2 perspective tool at wwww.condoctools.com. 81bd27bdc146994a9a1aad2095868fc4
I am specifically interested in your feedback on the value of the tools, template, layering system, workflow, and SketchUp standards that CONDOC provides. Let me know what you guys think!
Hello Mike -
I have been using your workflow for more than a year and am now using SU for all my residential construction documents.While Condoc's looks interesting, I have some concerns about being able to fully control the aesthetic quality of my CD's using Condoc's. Of course the time savings would be great (manually stacking the view ports gets old), but I fear in using Condoc's all the time savings would be undone by having to go back and redo hatch patterns and line weights to my specific needs.
How would I address this concern using Condocs?
Thanks,
Barbara
Advertisement