[Plugin] Add comments to your file
-
@inteloide said:@box said:
Sorry, I just noticed that it has a second error, thought it was a repeat but it is a different line.
There were a lot of bugs actually... Thanks for raising the error you had.
Version 1.5.1, just posted, corrects the tab deletion issue.Inteloide
-
Hello Glro,
Actually, the plugin should works like this : when selecting a scene in Sketchup, the linked (if defined) tab in plugin is shown.
The opposite (when clicking on a tab in plugin, show the scene in Sketchup) is not implemented yet. I could, if you need it.
About the javascript error you have, could you please tell me more : when do you have this error, what did you do before ?
Inteloide
-
@inteloide said:
Hello Glro,
Actually, the plugin should works like this : when selecting a scene in Sketchup, the linked (if defined) tab in plugin is shown.
The opposite (when clicking on a tab in plugin, show the scene in Sketchup) is not implemented yet. I could, if you need it.
About the javascript error you have, could you please tell me more : when do you have this error, what did you do before ?
Inteloide
when i clic on a scene tab in sketchup, it doesn't change anything in the comment window, even if i previously set a link between a comment tab and a scene tab
the error message i sent, i don't remember how it popped up
here is a new one: it appeared when i clicked on the comment button to show again the comment window, after closing it using the cross in the upper left corner
-
tiiuuuu !!!!
I've same bug when changing the language.... not good -
okay, version 1.5.2 should solve javascript issue.
About your tab-scene issue, I tried from an empty file : it works.Could you please open the ruby consol window (Window/Ruby Consol) to see if error appear Inside, when setting the link and changing the scene in SU ?
Thank you.
Inteloide -
@inteloide said:
okay, version 1.5.2 should solve javascript issue.
About your tab-scene issue, I tried from an empty file : it works.Could you please open the ruby consol window (Window/Ruby Consol) to see if error appear Inside, when setting the link and changing the scene in SU ?
Thank you.
Inteloideno error message in the ruby console ... because it works perfectly!
i clic on the scene tab and the comment window shows the corresponding tab, as said
after installation, i had to close sketchup and open it again, though; just after the installation, it didn't work
thank you, seems operational; i am not sure about the use of a backward link between the comment window and the scenes...
-
@glro said:
@inteloide said:
after installation, i had to close sketchup and open it again, though; just after the installation, it didn't work
I don't know how to proceed to make it work for the first time. I think, it's the same of some other extension (from other developers) I installed in the past.
No big problem, I think.
I just add an help file in first post of this thread, in pdf format.
Inteloide
-
@inteloide said:
No big problem, I think.
Inteloide
i agree; you just have to know it
the plugin seems to be ready for use; adding an active link to a web page would be nice, but the link can be added and copied/pasted in an internet browser also, so it is not very important
-
Great plugin!
Made translation for the Russian language.elsif @option_langue=="ru" then
@strWindowName="ΠΠ°ΠΌΠ΅ΡΠΊΠΈ"
@strButtonsTitles=["ΠΠΎΠ±Π°Π²ΠΈΡΡ ΡΠ΅ΠΊΡΡΡΡ Π΄Π°ΡΡ ΠΈ Π²ΡΠ΅ΠΌΡ", "ΠΠ°ΡΡΡΠΎΠΉΠΊΠΈ", "Π ΠΠ»Π°Π³ΠΈΠ½Π΅"]
@strModifyTabName="ΠΠ°ΡΡΡΠΎΠΉΠΊΠΈ ΠΠΊΠ»Π°Π΄ΠΊΠΈ"
@strDeleteTab="Π£Π΄Π°Π»ΠΈΡΡ ΠΠΊΠ»Π°Π΄ΠΊΡ"
@strButtonsTexts=["Π‘ΠΎΡ ΡΠ°Π½ΠΈΡΡ","ΠΡΠΌΠ΅Π½Π°"]
@strAbout="Π ΠΠ»Π°Π³ΠΈΠ½Π΅"
@strTexts=["Π―Π·ΡΠΊ",
"ΠΠ²ΡΠΎΠΌΠ°ΡΠΈΡΠ΅ΡΠΊΠΈ ΠΎΡΠΊΡΡΠ²Π°ΡΡ ΠΎΠΊΠ½ΠΎ, Π΅ΡΠ»ΠΈ ΡΡΡΠ΅ΡΡΠ²ΡΡΡ Π·Π°ΠΌΠ΅ΡΠΊΠΈ",
"ΠΠ²ΡΠΎΠΌΠ°ΡΠΈΡΠ΅ΡΠΊΠΈ ΠΎΡΠΊΡΡΠ²Π°ΡΡ ΠΎΠΊΠ½ΠΎ, Π΄Π°ΠΆΠ΅ Π΅ΡΠ»ΠΈ Π·Π°ΠΌΠ΅ΡΠΎΠΊ Π½Π΅Ρ",
"ΠΠΎΠΊΠ°Π·ΡΠ²Π°ΡΡ ΠΎΠΊΠΎΠ½ΡΠ°Π½ΠΈΠ΅ Π·Π°ΠΌΠ΅ΡΠΊΠΈ ΠΏΡΠΈ ΠΎΡΠΊΡΡΡΠΈΠΈ Π²ΠΊΠ»Π°Π΄ΠΊΠΈ"]
@strTabName="ΠΠ°Π·Π²Π°Π½ΠΈΠ΅ ΠΠ°ΠΌΠ΅ΡΠΊΠΈ: "
@strTab=""
@strSureToDeleteTab = "ΠΡ ΡΠ²Π΅ΡΠ΅Π½Ρ, ΡΡΠΎ Ρ ΠΎΡΠΈΡΠ΅ Π£ΠΠΠΠΠ’Π¬ ΡΡΡ Π²ΠΊΠ»Π°Π΄ΠΊΡ?"
@strTabOptionName="ΠΠ°ΡΡΡΠΎΠΉΠΊΠΈ Π²ΠΊΠ»Π°Π΄ΠΊΠΈ"
@strNoLink="-- ΠΠ΅ ΡΠ²ΡΠ·ΡΠ²Π°ΡΡ ΡΠΎ Π‘ΡΠ΅Π½ΠΎΠΉ --"
@strTextsOptionsTab=["ΠΠΌΡ ΠΠΊΠ»Π°Π΄ΠΊΠΈ :","Π‘Π²ΡΠ·ΠΊΠ° ΡΠΎ Π‘ΡΠ΅Π½ΠΎΠΉ :","ΠΡΠΈΠΌΠ΅Π½ΠΈΡΡ","ΠΡΠΌΠ΅Π½Π°"] -
Hello
Thanks alexanor for this translation.
For Glro, in version 1.5.4, I optimized the code in order have the text area more reactive.
I hope it will works, I just have one model at works that slow down the text area, so I cannot check at home.Regards.
Inteloide -
See life in colors !!
New version added : set colors to your tabs :
Enjoy !
Inteloide
-
I can not find a link to download version 1.6.1...
-
Correcto !
Just update the post...Inteloide
-
Excellent! Now it works!
-
Inteloide whether you can connect to the script calculator? It would be convenient to make calculations and take notes in one window ...
-
Can't you do calculations already in the operating system's calculator, in SketchUp's Ruby Console and in various Ruby Console plugins? You can then copy&paste the calculations that you want to keep.
The comments plugin is to save text that the user enters, and not to automatically evaluate and manipulate parts of the text. I think it should keep focussed to do this task well.
-
Hello !
Is this script something that already exist ? If yes, could you send me the link ?
Inteloide
-
@aerilius said:
Can't you do calculations already in the operating system's calculator, in SketchUp's Ruby Console and in various Ruby Console plugins? You can then copy&paste the calculations that you want to keep.
I do not want to open many windows in Sketchup. If this plugin can do "Add comments".
Inteloide, thank you for the effort! -
Great plugin, very, very useful, and seconding the idea of building a/the calculator into the comment box.
-
Hello !
I'm back after one week of holidays in Rome. Such a nice town !
So if I understand correctly your request, you want me to add a button that allow you to have a calculator, like Windows'one, in the "add comment" plugin, without openning another window, correct ?
If yes does anybody knows a free plugin I can insert in my script ? This will make my work easier !Thanks
Inteloide
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better π
Register Login
Advertisement