How can anyone possibly use layout
-
I know about how to convert to 3D modeling and communicating on paper.
I am not looking for all that refinement in 2D at all.Just a resonable workflow were elevations and some perspectives, maybe a "filled" crosssection with some basic dimensions tell the story of first tryouts of a design.
If this means going complete slowmotion, lets say 90% waiting for redraws and the occaisional input from my side I would go mad. That is how it feels now and to many others I assure you.
So we are doing something wrong. Not just a little here or there but a major step is not clear stalling even the easiests of tasks to a standstill.
I will go and see what it is. But its sure not Sketchup which to me is always fast enough.
Tx, really for the replies, very appreciated.
Francois -
Francois, I don't know how many times I've written this on this forum in the last few weeks but render times with 2013 are so much shorter than in LO3 that I can render entire highly detailed models in only a few minutes. I'm not sitting waiting for the renders to complete like I was with LO3.
Arail, you should look at Sonder's videos showing how he works.
-
Vector rendering perspective views on complex models still takes some time... but not nearly as much and should complete in a reasonable time... a few seconds? under a minute.
-
well.... I am not going to use Layout anyhow no matter how many times
ok, sorry, I could not help that, I was just distracted by these smilies. Who ever uses these critters. But its late and so ..
tx for the help so far. I am going to set my self up with something simple enough to test with.
If I hear you all right it should be working and in a productive way as well.I think all has been said about my outcry here on Layout. It seems a matter some basic training. Lets see were I get with that.
Francois -
lots already said... but detailed drawings can be quick, and beautiful (IMHO) - like Sonder's work... and others.
-
[quote]...and beautiful (IMHO) ...[/url]
And yours, Mike. And yours.
I'll repeat myself. Anyone who claims LayOut is unusable just flat out hasn't bothered to learn how to use it.
-
@dave r said:
@unknownuser said:
...and beautiful (IMHO) ...[/url]
And yours, Mike. And yours.
I'll repeat myself. Anyone who claims LayOut is unusable just flat out hasn't bothered to learn how to use it.
Thanks DaveR, taken with much respect from you!
There are others doing very very nice work...
-
Yes Mike, those are some of the examples that made me first want to move over to Layout...
-
Hi,
tx for posting your examples. Saw them before in another thread. Not to speak against them, they look impressive but the work in fact is rather simple. Mostly a repetition of more or less the same wooden frames with very little added in Layout.The work we do is multitude more complex, in amounts of geometry and various types of geometry with a lot more to organize in terms of dimensions and text.
It's not that I think Layout is useless, on the contrary, I think with proper development it shows a lot of potential. But it does not compare to VisualARQ for Rhino, Vectorworks, Revit, or ArchiCad, not even remotely.
If you are working at an architectural office promoting the use of Layout you have to remember it competes with the mentioned applications. All offices finalize drawings based upon 3D models somehow. So, I was just wondering who is actually able to get the work done and how since I could not get much production out of Layout.
The combination Vectorworks and Sketchup is so much faster than the hassle I met with Layout for our projects.But I do see I need to get into it deeper to see if now and if at all in the near future Layout could become a serious option for at least some part of the design process communicating with our clients.
Francois -
Chief Architect checks your drawing for code compliance...
-
@unknownuser said:
... with very little added in Layout.
I think that last bit is key. Even when I used AutoCad with HSB for timber, and AutoCad Architectural desktop for buildings, I did as much as possible in model space, and only used paper space for notation. Even then I was starting to move away from complex and tedious hatching over 2d work and was trying to model things like I would build them.
So sure, my work might be 'simple' (I have a few complete buildings on the boards) - but it is an effective tool. If I were doing more full home or building design I'd develop my approach along the lines of Sonder.
Would SU+LO work for commercial projects? Maybe. Depends on what you are doing. A nice feature of it is that you don't need to be a CAD expert or have to shell out many thousands of dollars to get up and running. And you don't need an IT staff or paid consultant to work through the myriad setup stuff to just draw stuff. Yes, I see the value (and have used) BIM based programs. But they come at a fairly large expense. What I like about SU+LO is that it really feels like an extension of the drafting table, taking back some of the ugly and coldness and lack of spirit that CAD brought us.
Does this Rhino plugin allow one to create 2d PDFs with notation?
I'd really love to see some threads on competing packages.
-
Mike,
I agree the expense that some of these packages are not very inviting. For us here and many others it takes revit out of our options.
Have a look here http://www.visualarq.com/gallery/videos/
I have no experience with VisualARQ but it looks suprisingly good. The expense seems to be in line with something we might invest in.I also agee that Layout is getting better and the focus on Layout might be Trimbles ownership now. Also that sounds good. Who wants to model a building just to start all over with another package for the sake of engineering.
But our drawings are a mixup of images, lots of text and dimensions and lots of revisions and include lots of references to sitemaps, pdf's with existing doucments in case of remodelings and so on. So far out of reach of Layouts capabilities that its really useless to start up Layout every once in a while.
And then, Layouts slowness referencing to a Sketchup model does not help. I am no longer patient enough to sit behind my system waiting for redraws and updates. I am used to instant feedback while typing and getting projects to my clients. Just slicing a SU model for further use in Vectorworks is very quick as well.
Its no fun seeing a project slow down because the application is not up to speed. Sometimes its easier on the mind to redo something than to consiously and carefully setting up files and references to get a little benifit later on. Much of the benifit is often waisted because projects don't pull through or are changed so much that the original work is better deleted.
Francois -
@frv said:
Mike,
I agree the expense that some of these packages are not very inviting. For us here and many others it takes revit out of our options.
Have a look here http://www.visualarq.com/gallery/videos/
I have no experience with VisualARQ but it looks suprisingly good. The expense seems to be in line with something we might invest in.How does one get that into 2d construction documents?
@frv said:
But our drawings are a mixup of images, lots of text and dimensions and lots of revisions and include lots of references to sitemaps, pdf's with existing doucments in case of remodelings and so on. So far out of reach of Layouts capabilities that its really useless to start up Layout every once in a while.
Not sure, but I bring in PDFs of details (typically from an engineer I work with), images, SketchUp, etc. And I add text, notes, and dimensions as needed. I stay away from hatching, and 2d linework whenever possible.
@frv said:
And then, Layouts slowness referencing to a Sketchup model does not help. I am no longer patient enough to sit behind my system waiting for redraws and updates. I am used to instant feedback while typing and getting projects to my clients. Just slicing a SU model for further use in Vectorworks is very quick as well.
I've been very impressed with the speed improvements in 2013. Huge difference. Night and day. Still slows down just a bit when re-rendering the entire drawings set when running vector and working on a large model (Round Barn) - but way better.
@frv said:
Its no fun seeing a project slow down because the application is not up to speed. Sometimes its easier on the mind to redo something than to consiously and carefully setting up files and references to get a little benifit later on. Much of the benifit is often waisted because projects don't pull through or are changed so much that the original work is better deleted.
Perhaps its just not for you. Lots of options out there. For me, speed in SketchUp, simple presentations to clients, and then maintaining that look into CDs and assembly drawings is what works.
I'd love to try out Rhino, can't seem to get the OSX download page to work on Safari or Chrome. And I'd love to try out other options - but in the end, as much as I do by sharing 3d models, I still need to get 2d work out. I'm not interested in doing this work in AutoCAD. Revit is interesting, but would bankrupt me with licensing and learning curve... so for me, this is where I'm at.
-
I don't think complexity will have any issue on using layout. The problem with most architectural firms is they have invested years into their CAD standards and details. While I focus mainly on homes, some of them are quite complex. I have also done a fire station using this system with no issues at all.
I think the best aspect of SU/LO is being able to visualize the project and details in a way that typical CAD systems cannot. To me that would make it an ideal candidate for very complex projects.
-
and then sonder shows up and makes me feel inadequate...
very nice work. an inspiration, for me, if / as / when i continue to move from complex frames / construction to more whole house...
-
@bmike said:
and then sonder shows up and makes me feel inadequate...
very nice work. an inspiration, for me, if / as / when i continue to move from complex frames / construction to more whole house...
Hardly Mike: I admire your work very much. In fact, I recently got my Structural Engineer to do two recent projects entirely in SU/LO. He is sold. Initially I referred him to your projects as an example. That first impression got him started......thanks for that!
We are now on our third project together where every drawing in the CD set is done in SU/LO. He even got into a little rendering!
-
Good idea Mike... Let the Battle Begin.
-
Nick,
Nice to see that picture of your project. Beautiful shot. I've seen a number of Tahoe style houses and it is great to see one done so well... with real architecture not just excess.
Peter
-
Here is a link to the typical engineering we do 2D/3D. Don't click the link if you are on a slow connection, its about 6 Mb.
http://fillieverhoeven.nl/downloads_files/005bos.pdfModels in SU, rendered some in Maxwell and all 2D work done in Vectorworks.
These drawings are for the building permit application. Not all of the application drawings are included.On the second page you see a list of the drawings. Apart from the graphical appereance its also a worksheet (like Excell) were you fill in the details. With one mouseclick you can update as many sheets for sheetnumbers, dates names etc.
In the Netherlands we are used to provide for very detailed drawings in almost every stage of the process. If at any stage we can't really continue to work in Layout, we have to convert to a more suited application. Imagine the work involved. So either we can fully do the work in Layout or we rather export the models to Vectorworks as early as possible.
To Mike:
I don't know what you mean to say with:-
How does one get that into 2d construction documents?
-
Rhino for Mac is not available neither is VisualARQ. Rhino has a beta Mac version that I was told about was not to be taken seriously yet.
Regretfully, my still perfectly in order Macpro's 8-cores with the terrabytes of memory, bought just before 2008 are no longer supported by Apple above OSX 10.6.8. So I can't really tryout Layout 2013 other than on my slightly newer Macbook. A lesson learned, never buy any expensive stuff from Apple. I am expecting the newest Macpro's just anounced will last no longer than 4 or 5 years before they can't run the latest OSX graphic change over.
Revit will never really be our thing either. I just do not like the whole circus around it and the fear Autodesk is trying to put upon us disbelievers with their BIM-stories and pricing policies.
Francois
-
-
Francois,
That's some nice work... I don't speak Greek, but I take it that it all works. Love the Thatch details. Don't see anything that can't be done with SU/LO... maybe those detail markers are automatic? Notes automatic? Beautifully simple and detailed set of drawings though.
Advertisement