Ad Blocking on this website?
-
Indeed, the Four Yorkshireman, new version is very good too. Youtube will get you there.
-
Verryyy slooowwww with adblock off, takes over a minute to load pages, sorry this is a big problem folks.
-
No speed problems here. Less than 3 secs to load page.
There's a tool under Inspect Element in Chrome that allows you to view the load times of every item on a page. Or Dev Tool in IE, F12 I think.
If you can find the cause then maybe we can investigate.
-
This is what you get in Palm Springs , CA. mostly old copper lines but it's one of the nicer quieter places in SoCal.
I've noticed some of you Guys have blazing fast download-speeds but your Ping is way up?
-
Well, mine seems to be faster indeed - but I am not sure this should explain site slowness to that extent.
-
@gaieus said:
Well, mine seems to be faster indeed - but I am not sure this should explain site slowness to that extent.
not after seeing pete's results.. his internet is way faster than anyone else here but he's experiencing a slow scf
-
you need to tone down the adblock detection guys.
right now, it's triggering if it even detects adblock is installed and enabled.. even when the site is whitelisted! and sorry. I am NOT uninstalling it just to come here. I make an exception for you guys alone. I've actually had to install a secondary browser to use here with no adblocks installed to test but thats not staying for long.. I dunno what you changed but...
(I have an aversion to flashing things constantly extorting me to buy crap, rogue adverts trying to install malware (right now there's a lovely ad that pops up on Notalwaysright that keeps trying to install something on my Nexus 7 tablet if I use that to read the articles...) etc. )
-
@khai said:
you need to tone down the adblock detection guys.
right now, it's triggering if it even detects adblock is installed and enabled.. even when the site is whitelisted! and sorry. I am NOT uninstalling it just to come here. I make an exception for you guys alone. I've actually had to install a secondary browser to use here with no adblocks installed to test but thats not staying for long.. I dunno what you changed but...
(I have an aversion to flashing things constantly extorting me to buy crap, rogue adverts trying to install malware (right now there's a lovely ad that pops up on Notalwaysright that keeps trying to install something on my Nexus 7 tablet if I use that to read the articles...) etc. )
Thank you! I have an adblock active for the same reasons, always had and I don't want to waste my time cleaning up malware.
-
@khai said:
you need to tone down the adblock detection guys.
right now, it's triggering if it even detects adblock is installed and enabled.. even when the site is whitelisted! and sorry. I am NOT uninstalling it just to come here...
Khai, I also have AdBlock installed and when I disable it on SCF, it works fine. The "solution" here is not "sensing" if AdBlock is installed or not but if ads are displayed or not.
-
@gaieus said:
@khai said:
you need to tone down the adblock detection guys.
right now, it's triggering if it even detects adblock is installed and enabled.. even when the site is whitelisted! and sorry. I am NOT uninstalling it just to come here...
Khai, I also have AdBlock installed and when I disable it on SCF, it works fine. The "solution" here is not "sensing" if AdBlock is installed or not but if ads are displayed or not.
then I invite you here to show me how to fix it.
I have "disabled" it on this site. I cannot "see" pictures or attachments. I get a message that I am running an adblocker.so. if I disable it fully and restart firefox? I see the pictures and attachments.
I reenable it, I don't see themso. what does that say? hmm? the site is whitelisted and allowed in Adblock. until last the last few days, I was having no issues.
now I am. and yes I AM seeing ads. I'm NOT seeing attachments.
-
also this is what I'm seeing. ad's at the top
and the blocking message at the bottom. oh and ironically.. I can't see my own attachment.
-
Chrome with no adblock still takes well over a minute to log on
-
header ads a local injections and not BSA
-
@khai said:
also this is what I'm seeing. ad's at the top
and the blocking message at the bottom. oh and ironically.. I can't see my own attachment.
There are ads between the board index and the corner bar. They seem to be "lost" on your screenshot.
(In contrast to the SketchUcation banner that is hosted here, the others are hosted on buysellads.) -
@khai said:
also this is what I'm seeing. ad's at the top
and the blocking message at the bottom. oh and ironically.. I can't see my own attachment.Khai, somehow you still block ads. This is what's missing from your browser.
-
Do ads also influence the speed test? (See black box on previous screenshots)
-
It took 45 seconds to load the forum page, then well over a minute after clicking 'new posts'. Waiting on buyselladds. Not very fun waiting so long. Hope we find a solution for this!
-
I've been asked how this works.
Internet browsers (every one that I've tested) uses the "hosts" file for domain name resolution, FIRST, before going to domain lookup online.
When you type a text web address, the browser needs the corresponding numeric IP address. The browser has to get it someplace, right? Everyone assumes that it is acquired online, as they have seen the messages to that effect.
Fortunately, the IP address can be provided by the "hosts" file, if you add them to it. The only primary advantage is faster access, since web-based domain lookup is avoided. This was the initial reason for the "hosts" file.
If, however, you put a text web address in the "hosts" file, and provide the WRONG numeric IP address, the browser will go to the wrong address. If you look at the example I provided above, and look in your own "hosts" file, you will see that the numeric IP address provided, for EVERY entry is, "127.0.0.1"
"127.0.0.1" is the IP "home" address for your OWN COMPUTER !
This causes the browser to look for files on your computer - files that aren't there.
When an advertisement is supposed to load, the browser can't find it (on your computer,) so it just skips it. (Some browsers show an error message, some just a blank graphic box.)
By the way, you can download "hosts" files, from online sources, that are already packed with hundreds of the the most common "bad actors." I've been doing this for decades; long before ad-blocking software came along. If you find yourself blocked from a necessary website, edit the "hosts" file, to permit routing to the proper address.
-Taff
-
Taff originally wrote...
@unknownuser said:
Here is the solution, which I just confirmed on my Windows machine.
There is a built-in site-blocking file on EVERY Windows machine, called the "hosts" file (no extension.) Macs may use a similar file. On my Windows XP machine, it is located in the following directory:
C:\WINDOWS\system32\drivers\etc
Look for the "hosts" file. Open it for editing with Notepad. Use <ctrl>-F, to open Notepad's "find" window, and search for "buysellads". (I found two instances in my hosts file.)
Append a "#" character to the beginning of the line. (This will cause the line to be treated as a comment line, rather than a valid block entry.)
My case:
...
127.0.0.1 buytraffic.cn
127.0.0.1 s3.buysellads.com
127.0.0.1 stats.buysellads.com
127.0.0.1 buzzclick.com
...
When edited:
...
127.0.0.1 buytraffic.cn
#127.0.0.1 s3.buysellads.com
#127.0.0.1 stats.buysellads.com
127.0.0.1 buzzclick.com
...
Save the file. Reload your browser. (I use Chrome, and don't have to reload. A page-refresh is sufficient.)The problem: Uploaded images and attachments being stored at an internet address that is a recognized ad/spamming source.
Many ad-blocking programs revise the "hosts" file, as part of their blocking methodology. You can always edit yourself, if you encounter a website that is being blocked, and you need to permit access.
If SketchUcation is going to continue to use "buysellads" or comparable host for file storage, these instructions need to be posted as a "sticky"
-Taff
This post was removed in error.
-
Hunted for the 'hosts' file without success, I'm using windows 8.
Advertisement