[Plugin] Edges/Construction Lines Converter V1.3

guanjin

Right-click to select the color point of the blank, invalid

guanjin

Right-click to select the color, no response

Michaelv

@jorge2011 said:

EXCELLENT PLUGIN.
a query.?
is possible convert smooth lines to construction lines?
is possible the option of adding construction points at the ends of the lines?
You can auto-detect lines with the mouse when I pass over a line?
thank you very much

Smooth line, well I assume that if you view hidden, you can pick them and convert, I'll try.
Cpoints, done already, use alt
auto detect, well that would be nice, I don't know how to do yet
I presume what you mean is highlighting the line as you go over, before clicking to pick it.

I'll look into it, but I'm working on 1.3 for much better integration too.

As for no color, I don't know I will look, but mine works, so not sure why.

Michaelv

@guanjin said:

Right-click to select the color, no response

It only works when you are in the color change mode (see status line at bottom, and change mode with command key).

Works all the time now (in version 1.3)

jorge2011

thank you very much for this update.

"auto detect, well that would be nice, I don't know how to do yet
I presume what you mean is highlighting the line as you go over, before clicking to pick it."

YES

jeff hammond

neat. thank you!

.

Clayton49

Hi All,

Can anyone confirm if this PLUG-IN works with SU Pro-2014.

Over & out,
Clayton.

pilou

Works perfectly with the 2014 Make (PC), so I suppose that is the same for the Pro!

Dave R

@clayton49 said:

Hi All,

Can anyone confirm if this PLUG-IN works with SU Pro-2014.

Over & out,
Clayton.

What happens when you try it?

greenskp

Thank you!
Works great! SketchUp 2015!

function

bug on console load 2016

C;/Users/user01/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/xLinem.rb;39; warning; class variable access from toplevel
C;/Users/user01/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/xLinem.rb;40; warning; class variable access from toplevel

Dave R

@function said:

bug on console load 2016

C;/Users/user01/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/xLinem.rb;39; warning; class variable access from toplevel
> C;/Users/user01/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/xLinem.rb;40; warning; class variable access from toplevel

How did you install it? I just installed it in SU2016 using the Extension Store and it works just fine.

function

strange, I always use thomthom's drag and drop - is it possible something else could cause an error like that?

Dave R

What do you mean you use ThomThom's drag and drop?

I expect you've got the thing installed incorrectly or it would work.

function

thomthom's drop zone installer. still gives me error, also using eneroth's console opener on start, not sure if that has something to do with it

Dave R

If you've got a bad installation of it, installing it again won't clean it up. At this point you should go to the Plugins folder and remove all traces of this plugin. Then either download the RBZ file and installed it with Install Extension in Preferences>Extensions or navigate to it in the Sketchucation Extension Store and install it with the Install button. Both of those options are sure to install it correctly.

Sketcheldar

Thanks for the plugin!!!, it doesn’t work in sketchup 2024, you can fix it

Sketcheldar

#Corrected code for plugin to work in SU 2024

  @@colorx = "Black"
  @@stipplex = "_"

  def initialize
    @endpoints = false
    @change = false
    @colorlist = String.new
    colorlist = Sketchup::Color.names
    l = colorlist.size
    l = l - 1
    for e in 0..l do
      @colorlist = @colorlist + colorlist[e].to_s + "|" if e != l
      @colorlist = @colorlist + colorlist[e].to_s if e == l
    end
    cflag = false
  end

  def activate
    @model = Sketchup.active_model
    @ents = @model.active_entities
    @sel = @model.selection
    @lines = []
    show_status
    conversion
  end

  def show_status
    statustext = "Edges into \"" + @@stipplex + "\" construction lines and cline to " + @@colorx + " edges (Command)" if !@change
    statustext = "Construction lines into \"" + @@stipplex + "\" clines and edges into " + @@colorx + " edges (Command)" if @change
    statusoption = "; Draw end points (Alt)" if @endpoints
    statusoption = "; Endpoints not drawn (Alt)" if !@endpoints
    status_label = statustext + statusoption
    Sketchup.set_status_text(status_label, SB_PROMPT)
  end

  def conversion
    @model.start_operation "Line Conversion"
    view = @model.active_view
    if !@change
      for e in @sel
        if e.class == Sketchup::Edge
          lstart = e.start.position
          lend = e.end.position
          if @endpoints
            @ents.add_cpoint lstart
            @ents.add_cpoint lend
          end
          @ents.add_cline(lstart, lend, @@stipplex)
          @lines.push(e)
        elsif e.class == Sketchup::ConstructionLine
          if e.start && e.end
            lstart = e.start.position
            lend = e.end.position
            if @endpoints
              @ents.add_cpoint lstart
              @ents.add_cpoint lend
            end
            @ents.add_edges(lstart, lend)
            @ents[-1].material = @@colorx.to_s
            @ents[-1].find_faces
            @lines.push(e)
          end
        end # e.class
      end # for e
      if !@lines.empty?
        @lines.each do |e|
          e.erase! if e.valid?
        end
      end
    elsif @change
      for e in @sel
        if e.class == Sketchup::ConstructionLine
          e.stipple = @@stipplex
          if e.start && e.end
            lstart = e.start.position
            lend = e.end.position
            if @endpoints
              @ents.add_cpoint lstart
              @ents.add_cpoint lend
            end
          end
        elsif e.class == Sketchup::Edge
          lstart = e.start.position
          lend = e.end.position
          if @endpoints
            @ents.add_cpoint lstart
            @ents.add_cpoint lend
          end
          e.material = @@colorx.to_s
        end # e.class
        view.invalidate
      end # for e
    end # @change
    @sel.clear
    @model.commit_operation
  end

  def self.xLine_validate_selection_edge
    Sketchup.active_model.selection.each {|e| return true if e.class == Sketchup::Edge}
    return nil
  end

  def self.xLine_validate_selection_xline
    Sketchup.active_model.selection.each {|e| return true if (e.class == Sketchup::ConstructionLine && e.start && e.end)}
    return nil
  end

  def onKeyDown(key, repeat, flags, view)
    if key == VK_COMMAND  ### Cmd toggles stipples and change
      @change = !@change
    end

    if key == VK_ALT ### Alt toggles end points
      @endpoints = !@endpoints
    end
    show_status
  end

  def onLButtonDown(flags, x, y, view)
    ph = view.pick_helper
    ph.do_pick(x, y)
    best = ph.best_picked
    @sel.add(best) if best
    conversion
  end

  def onRButtonDown(flags, x, y, view)
    cflag = true if @@colorx == "Black"
    list = ["-|.|-.-|_", @colorlist]
    prompt = ["XLine Stipple: ", "Color: "]
    values = [@@stipplex, @@colorx]
    result = inputbox(prompt, values, list, "Change Parameters")
    if result
      @@stipplex = result[0].to_s
      @@colorx = result[1].to_s
      if cflag && @model.rendering_options["EdgeColorMode"] != 0
        choice = UI.messagebox "The edges color will only be visible if you switch to \"display color by material\". Do you want to do this at this time?", MB_YESNOCANCEL
        case choice
        when 6
          @model.rendering_options["EdgeColorMode"] = 0 # sets up styles for Color By material
          cflag = false
        when 7
          cflag = false
        end
      end # if cflag
    end # if result
    show_status
    conversion
  end

  def deactivate(view)
    Sketchup.set_status_text("", SB_PROMPT)
    Sketchup.set_status_text("", SB_VCB_LABEL)
    Sketchup.set_status_text("", SB_VCB_VALUE)
  end
end

if !file_loaded?("XLinem.rb")
  UI.add_context_menu_handler do |menu|
    if XLinemTool.xLine_validate_selection_edge
      menu.add_separator
      menu.add_item("Convert to XLine") {Sketchup.active_model.select_tool(XLinemTool.new)}
    elsif XLinemTool.xLine_validate_selection_xline
      menu.add_separator
      menu.add_item("Convert to Edge") {Sketchup.active_model.select_tool(XLinemTool.new)}
    end
  end
end

unless file_loaded?(__FILE__)
  cmd = UI::Command.new("xlinem Convert") {Sketchup.active_model.select_tool(XLinemTool.new)}
  cmd.small_icon = File.join(File.dirname(__FILE__), "Xlinem", "Xline_SM.png")
  cmd.large_icon = File.join(File.dirname(__FILE__), "Xlinem", "Xline_LG.png")
  cmd.tooltip = "Construction Line Conversion"
  tb = UI.toolbar("Line Conversion") # Fixed string termination
  tb.add_item(cmd)
  tb.restore
end```

TIG

@Sketcheldar
Because you haven't formatted your code properly it's unusable.
Use the </> button to add the correct 'Code' formatting...
Which is three ` at the start & end of your code, on a separate line.

FlorinAp

@Sketcheldar Something is wrong with this code...!!??