I invite for acquaintance with Russian plug-in

yad2000

@jorge2011 said:

thanks for the update. But still generates the same error, when using the tool "tube":
Error: #<ArgumentError: Not enough edges - at least 3 required>
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:569:in add_face' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:569:in cp_create_pipe_geometry'
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/PipeTool.rb:110:in `onLButtonDown'
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:247
you can fix it?
I use:
windows xp in Spanish
sketchup 8 pro in Spanish

hmm ...
very strange ...
I was not able to repeat that mistake, I can recommend:

Line number 569 is:

face = entities.add_face circle

Try replacing the line number 557:

circle = entities.add_circle pt1, vecbegin, radius, numsegs

on the line

circle = entities.add_circle pt1, vecbegin, radius, 24

or if not, then the line

circle = entities.add_circle pt1, vecbegin, radius

language is not involved, but rather a problem of API in your version of SketchUP, although the design:

circle = entities.add_circle

works with the version of SketchUp 6.0+, can you have an earlier version, not 8.0 PRO? in a previous version of the plug CoolPipe 1.2.0 you have the same problem was, nobody else it is not repeated

jorge2011

This solution does not work.

the list of error:

Error: #<ArgumentError: Not enough edges - at least 3 required>
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:570:in add_face' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:570:in cp_create_pipe_geometry'
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/PipeTool.rb:110:in onLButtonDown' Error: #<NoMethodError: undefined method bounds' for nil:NilClass>
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/ReducerTool.rb:90:in creategeometry' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/ReducerTool.rb:67:in onLButtonDown'
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:570
Error: #<NoMethodError: undefined method bounds' for nil:NilClass> C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/TeeTool.rb:90:in creategeometry'
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/TeeTool.rb:68:in onLButtonDown' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/ReducerTool.rb:90 Error: #<NoMethodError: undefined method bounds' for nil:NilClass>
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/FlangeTool.rb:90:in creategeometry' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/FlangeTool.rb:67:in onLButtonDown'
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/TeeTool.rb:90
Error: #<NoMethodError: undefined method bounds' for nil:NilClass> C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/FlangeTool.rb:90:in creategeometry'
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/FlangeTool.rb:67:in onLButtonDown' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/FlangeTool.rb:90 Objeto elegido CoolPipe = Error: #<NoMethodError: undefined method []' for nil:NilClass>
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/PipeTool.rb:594:in getparams_frompipe' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/PipeTool.rb:327:in reset'
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/PipeTool.rb:296:in initialize' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:3070:in new'
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:3070:in cp_edit_coolpipe_elements' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:21:in cp_add_toolbar_button'
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/FlangeTool.rb:90:in call' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/FlangeTool.rb:90 Error: #<NoMethodError: undefined method layer' for nil:NilClass>
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/CopyOptionsTool.rb:67:in onLButtonDown' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/PipeTool.rb:594 Error: #<NoMethodError: undefined method layer' for nil:NilClass>
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/CopyOptionsTool.rb:67:in onLButtonDown' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/CopyOptionsTool.rb:67 Error: #<NoMethodError: undefined method length' for nil:NilClass>
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:2819:in cp_get_length_tube' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:2931:in generate_CoolPipe_specification'
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:2925:in each' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:2925:in generate_CoolPipe_specification'
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/Service_proc.rb:25:in cp_add_toolbar_button' C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/CopyOptionsTool.rb:67:in call'
C:/Archivos de programa/Google/Google SketchUp 8/Plugins/CoolPipe/CopyOptionsTool.rb:67

Dan Rathbun

@yad2000 said:

Line number 569 is:

face = entities.add_face circle

try:
face = entities.add_face( circle.edges )

yad2000

That's right, because you're not going to work. This plugin is targeted to the appropriate users. You have added a new document and a new tube without any parameters, of course anything you do will not work. The parameters necessary to specify everything: nominal diameter, outside diameter, wall thickness, the name of the pipeline, etc. All that is required.
So that promote your cause, or assist in the development or discourage new users

yad2000

Please bring a list of documents for which you want to add elements. Now used only 2 Russian document on the piping. If you write a number of documents that you use and you can download them somewhere, I'll add them to the database to avoid similar mistakes.

tony bombata

@jorge2011 said:

@unknownuser said:

I receive the following error code after installing.

Thanks you in advance for your help.

Ken

You must copy the file "iconv.so" in the folder:
windows/system32

i use x64 windows and i had the same problem

copied iconv.so and iconv.dll to win2, wow64, sketchup plugins and coolpipe folders
don't know which worked out but it's working

Dan Rathbun

Well which one of those paths are in the $LOAD_PATH array ??

guanjin

@yad2000 said:

Please bring a list of documents for which you want to add elements. Now used only 2 Russian document on the piping. If you write a number of documents that you use and you can download them somewhere, I'll add them to the database to avoid similar mistakes.

I can not open the page, to download, why not posted on the website

yad2000

@guanjin said:

I can not open the page, to download, why not posted on the website

Coolpipe.ru site - located in the ucoz.com - if none of the sites of ucoz you can not read - then the problem is with your provider.

guanjin

@yad2000 said:

@irwanwr said:

if the plugin will be available in English version and shared here too.
if it is true.

this is true, but it will probably not soon. Will take some time to create a fully functional version of the native language, only then do the translation. It is possible I will ask for help - if you do not mind

未命名.jpg

Finally downloaded, loaded error

yad2000

@guanjin said:

@yad2000 said:

@irwanwr said:

if the plugin will be available in English version and shared here too.
if it is true.

this is true, but it will probably not soon. Will take some time to create a fully functional version of the native language, only then do the translation. It is possible I will ask for help - if you do not mind

[attachment=0:15v5ur39]未命名.jpg[/attachment:15v5ur39]
Finally downloaded, loaded error

in the file that you changed - Error!
you must:
"沿线管道目录列表,
replaced by
"沿线管道目录列表",
should work

guanjin

Successfully translated into Chinese, but has not been used successfully, the of plumbing tools?

yad2000

@guanjin said:

Successfully translated into Chinese, but has not been used successfully, the of plumbing tools?

Normative documents only Russian. To broaden the base of the elements - I need to know what documents you use. They are very much, all I add one can not afford

guanjin

@yad2000 said:

@guanjin said:

Successfully translated into Chinese, but has not been used successfully, the of plumbing tools?

Normative documents only Russian. To broaden the base of the elements - I need to know what documents you use. They are very much, all I add one can not afford

I do not know that you mean ，the file is a common indoor plumbing components

yad2000

I also do not understand what you want)))

yad2000

I will say this: I have now developed a new version of the plugin, which will not appear on [iconv] and [web dialogues]. The most interesting thing to come, as the plugin will look - still a secret. When will the release of do not know. Work to be very much as I want to do everything in Ruby without any HTML and JavaScript

yad2000

who knows how to use the database MongoDB in Ruby for SketchUP

here...

yad2000

Time is now developing a new interface for plug-in.
Here is a screenshot

I want to abandon HTML, JavaScript, CSV. I am looking for ways to solve problems with the database.

Who share the standards DIN / EN / ISO / API / ASTM / ASME?

yad2000

Who shares the standards DIN / EN / ISO / API / ASTM / ASME?
For further development of the plugin. Interest standards for all items, not just on the tube. At least to start with 2 pcs. You can share the standard is not complete, but only the image and style options.

Google Translator gives terrible translations)))

In Russia, the translation is: "Your - my not understand"))))

ken

Hello

I have tried and tried to get this program to work. I keep getting the attached error. I have the file, iconv.so in the correct directory as shown.

So what is wrong, and can it be fixed? I deal with pipes diagrams and would like for this to work.

So thanks in advance for your help.

Ken