[AppleScript] - Sketchup PrintRight

driven

this is 10.5.8 list,

where I started from as well... {minimize effect:scale, dock size:1.0, location:bottom, magnification:false, class:dock preferences object, magnification size:0.5, animate:true, autohide:true}
or {minimize effect:scale, dock size:1.0, location:left, magnification:true, class:dock preferences object, magnification size:0.517857134342, animate:false, autohide:false}
right being the other location...

when NOT hidden, with the commented out version it just pushes it sideways 90px, either left, right or up...

what happens when you leave it out on Lion?

john

jeff hammond

not sure.. I'm on a phone now.
I'll chage it to where it checks for location or screen edge instead of just screen edge.
i guess at this point, I'm mostly concerned with the aspect ratio showing up properly.

an easy way to check is by setting the paper height and width to the same size (square) the using the shift-cmmd-4 screenshot cursor to manually measure the drawing area.

driven

been doing exactly that, and it's square... john

jeff hammond

@driven said:

been doing exactly that, and it's square... john

sweet!

I figured out how to get into the print dialogs so I should be able to get the rest of my ideas implemented.
going to SF tmmr for a week so I might not get an update out super soon.

jeff hammond

@edson said:

besides, can the units be changed to metric?

hey Edson, i have a question about the metric deal..
if you go File -> Page Setup… , are those units still being displayed in inches on your machine?

screen 2011-12-09 at 6.29.31 PM.jpg

and if you hover your mouse over the dimensions, is the popup showing your border settings also in inches?

for me, it always reports in inches regardless of my unit settings while the File->Document Setup… will show metric if i change units to metric..

if your page setup is showing metric then it must be at setting at the system level that i can't figure out yet.. but i do know that if i print with another app that uses the same "Page Setup… " (iWork's Pages for instance), the units are also in inches and i assume an apple app wouldn't force everyone to work in inches..
thanks

[EDIT] -- nevermind, found it

System Prefs-> Language & Text-> Formats-> Measurement Units

screen 2011-12-09 at 6.43.55 PM.jpg

driven

Jeff,

I did some unit test, and if I draw a parallel projection, top view rectangle, the same size as an A4 297mm, 210mm sheet of paper.

then input width 297, height 210 in the dialogs, I get SU resized around my drawing with height margins 27px and width margins of 40px [one per side...]

I get the same if I change model units to inches, and/or the input to inches, I not sure the units make any odds? as long as there proportional.

I can't loose that margin... john

EDIT: unless I use export to PDF use view size, I get a full page PDF from Preview for printing, borderless...
EDIT: that doesn't work.....

jeff hammond

right, the actual units being used won't matter for setting the aspect ratio.. there will probably be some dialogs eventually (or maybe a summary) so i'll check if the user is US or metric for that display..

i almost have it working now without the dialogs, the script is pulling the paper dimensions from the 'page setup...' dialog.
maybe one more session with it tonight and i'll get that part hooked up

jeff hammond

@driven said:

EDIT: unless I use export to PDF use view size, I get a full page PDF from Preview for printing, borderless...
EDIT: that doesn't work.....

right.. that's an example of why i want to do this thing..
if you want to print borderless, you have to make sure the paper/pdf has no borders set (which you can do via 'page setup->paper size->manage custom sizes.. -or- if you have the right printer type in your list, you'll have a few borderless options..

it's super confusing when first trying to figure all this out in sketchup and unnecessarily complicated (three different windows/dropdowns which all have an effect on your final output plus the fact that sketchup prints the entire drawing window but it doesn't have any way to make your drawing window and paper the same size).. so my goal is to make this a lot easier..

ie- you want a borderless 8 1/2 x 11? use this script and do it right the first try etc..
we'll eventually see if it's successful (fingers crossed)
[and if it is successful, i hope to show it to the google devs as an example of how sketchup should/could work ]

driven

I've been trying to get scale printing sorted forever, including lots of tests for GSuT, it's a pain, however I do like applescript so I'll help out where I can...

Figuring out those margins is the issue... john

jeff hammond

hmm.. so i'm running into some problems trying to do some things with applescript.. basically, it can't wait for the user to do something..
so for me to actually get this thing working as i would like it to, i'd have to have multiple scripts..

one possibility (i think) would be doing it via ruby (with the help of the local's of course )

do you think something like this is possible?

start the ruby
(maybe use it for some user input/ parameters)
ruby activates and gives the parameters to applescript(1)
the script does it's thing to the end but ruby is watching over everything..
the user does something (say a keystroke or clicks an 'ok' button or something) which the ruby sees then activates
applescript(2)..
etcetc..

might be a little more intense than what i'm willing to do but wandering just in case..

jeff hammond

actually, i may have just found a workaround.. everything i've read so far has said it's impossible to make something like this happen in applescript but this is more/less working.. it fails maybe 1 out of 15 times but i think i can mess with it some more to get it consistent..

try this in the AppleScript editor.. (with sketchup running and a su window present)

tell application "SketchUp"
	activate
	tell application "System Events" to tell process "SketchUp"
		
		set drawwin to count of windows
		set AppleScript's text item delimiters to {" "}
		
		click menu item "page setup..." of menu "file" of menu bar 1
		
		
		
		repeat until focused of window drawwin = true
			try
				set psz to value of static text 2 of sheet 1 of window drawwin
			end try
			
		end repeat
		
		
		
		
		set papw to first text item of psz
		set paph to third text item of psz
		
		display dialog "width = " & papw & "
height = " & paph
		
	end tell
end tell

it lets the user update their paper size while the script is still running and updating the variables according to the user's latest selection... then , when ok is pushed, the script continues along (well, in this case, it just show which numbers were pulled from the page setup..

i left some of the other stuff out of this post (determining paper orientation etc..) ... this is just illustrating that i may in fact be able to get all of this stuff into a single service.

driven

fails here

get focused of window 16 of process "SketchUp" true "Can’t get text item 3 of \"\"."

jeff hammond

@driven said:

fails here

get focused of window 16 of process "SketchUp" true "Can’t get text item 3 of \"\"."

hmm.. that's weird.. if it's getting to the text item3 part then it's making it through the 'wait' sequence which is what i was having problems with.. getting the text items was the easy part.

i'm not sure why it's failing to get the text item.. maybe thetext item delimiters aren't in leopard?
[seriously just a guess... or maybe your 'page setup' looks different than lions? (as shown in my earlier post questioning the metric/us settings)... i'll look into it..

driven

second time I got this
%(#4000FF)[get value of static text 2 of sheet 1 of window 16 of process "SketchUp"
"HP Photosmart C5100 series"
get focused of window 16 of process "SketchUp"
true
display dialog "width = HP
height = C5100"
«event ascrgdut»
{}
display dialog "width = HP
height = C5100"]

do you use 'Accessibility Inspector' to help pick your targets, can be useful

%(#404080)[<AXApplication: “SketchUp”>
<AXWindow: “Untitled - SketchUp Pro”>
<AXSheet: “Page Setup”>]
<AXPopUpButton: “A4”>
%(#404080)[Attributes:
AXRole: “AXPopUpButton”
AXRoleDescription: “pop up button”
AXHelp: “(null)”
AXEnabled: “true”
AXFocused (W): “false”
AXParent: “<AXSheet: “Page Setup”>”
AXWindow: “<AXWindow: “Untitled - SketchUp Pro”>”
AXTopLevelUIElement: “<AXSheet: “Page Setup”>”
AXPosition: “x=982 y=192”
AXSize: “w=216 h=26”
AXValue: “A4”
AXChildren: “<array of size 0>”

Actions:
AXShowMenu - show menu
AXPress - press]

driven

grabbing the wrong text, here. dialogs the same on Leopard.
I get this

driven

what about a simple 'on click OK', list all text items, then pick the ones you want.

you don't need the repeater then, the final click is your next step.

driven

jeff hammond

@driven said:

  "HP Photosmart C5100 series"

lol..weird.

@unknownuser said:

do you use 'Accessibility Inspector' to help pick your targets, can be useful

i'm trying out UI Browser.
http://pfiddlesoft.com/uibrowser/

seems sweet
but i didn't realize apple had some built-in stuff for gui scripting.

this gui stuff is kind of a pain though.. i wish sketchup would get a little applescript dictionary going..
i wonder how hard it would be for google to implement?

thing is, i've yet to get any of the errors you're showing on either of my machines but they both have lion on them..
i don't know what to do about making it compatible for everyone..

jeff hammond

@driven said:

what about a simple 'on click OK', list all text items, then pick the ones you want.

you don't need the repeater then, the final click is your next step.

that's the problem.. applescript won't wait for OK of any of the dialog boxes other than it's own.. it's only concerned with making it's way through itself and doesn't pay attention to anything else going on.

if i were to put an on click ok in there, it would throw up it's own dialog box which the user would also have to click on..

ie- set your paper size then click ok in the page set up dialog.. (but clicking on anything other than the applescript dialog will bring it into focus instead.. the second 'ok' — the applescript 'ok'-- you'd have to push is now behind the sketchup window..
no good.

jeff hammond

fwiw, this is a typical response about people wanting to wait for user input etc..

Error - Page Not Found - Apple Community

The page you tried was not found. You may have used an outdated link or may have typed the address (URL) incorrectly.

(discussions.apple.com)

i probably read 4 hrs worth of stuff on this issue alone and no one, even the experts, have any sort of easy solution.. it's always 'use multiple scripts' or 'don't even try it' or 'set up a timer' etc..

but i'm new and retarded so i kept trying and found a way to do it with 3 lines..
i posted at some other places to see why this hasn't been done before and i'm awaiting some responses.. maybe it has been tried but there's a reason i shouldn't be doing it?