[Plugin]SOLID QUANTIFY v2.5.1 (20131215)
-
@unknownuser said:
So,about length of group,maybe i think first need a plugin:SOLIDGROUP TO LINEGROUP,then count length of linegroup,and when sketchup to CAD ,PIPE-linegroup very nice than solidgroup!
Can you help me for plugin:SOLIDGROUP TO LINEGROUP?
Thanks again ![attachment=1:xrfumwyc]<!-- ia1 -->02.jpg<!-- ia1 -->[/attachment:xrfumwyc][attachment=0:xrfumwyc]<!-- ia0 -->test02.skp<!-- ia0 -->[/attachment:xrfumwyc]
Hi, zfrps.
I think it is very difficult.
I will consider it future.
Thanks. -
What this number?
Thanks.
-
@osn58 said:
What this number?
Thanks.Hi,OSN58.
"SUB TOTAL"is sub total of volumes in that group,when The Solids exists in the Group.
The group name is displayed in "PARENT NAME"Thanks.
-
Sub total of COST in that group,when The Solids exists in the Group does not work?
Thanks. -
@osn58 said:
Sub total of COST in that group,when The Solids exists in the Group does not work?
Thanks.Hi,I update solid quantify2 to v2.0b.
OSN58....
"Cost" in subtotal is incorrect.
It fixed now.
Thans. -
Great plugin.
Thanks. -
How to make localization of a plug-in (on Russian)?
-
γγγγ¨γγγγγΎγγ
-
This plug-in is great, but I found an error that renders the results unusable. Some of the material areas are doubled while most are correct in the generated reports. Secondly, in the the web dialogue there is a minor error that the volume is shown as "m" only in stead of "mΒ³", while the distances are shown as "mΒ³" in stead of just "m". If the first error regarding the incorrect doubling of areas could be fixed this plug-in would be perfect. Attached are a screen shot of the report as well as the SU model used to generate the report.
-
Screenshot of error report with wrong areas indicated.
-
@henkw said:
Screenshot of error report with wrong areas indicated.
Hi,Henk.
Thanks for your helps.
I will fix the problem in few days and update here.Thanks.
-
Hi,All and Henk.
I update this.
There are two Bugfix.
Surface area calculated double,when that face do not have back-material.
And mistaked about units when report rendered in webdialog.
This problem fixed.Thanks.
-
TAK2HATA, you have done an awesome job with this plug-in! Thanks for the fix, we are pushing its abilities to the limit. It requires a lot of discipline to keep everything clean and tagged properly to get the required results. For those who are using this as well, when models get really big and you can't seem to find why there are still errors... Make sure that the axes of all groups in a multi-level component are identically aligned. Use in conjunction with the plug-in βSolid Inspectorβ for quick results.
-
Hello and thanks for your plugin, I just find it a few days ago and it's just perfect for what I need... Unfortanetly in my MAC is not working well, don't let me export xml, don't let me apply solid materials, JUST LET ME VIEW IN WEBDIALOG and the most of the measures of elements oriented in Y axis appears in 0.00, did you or anyone mac users who are using this plugin can help?
thanks.
-
Excellent Plug-in!! How to I change the quantities to SF and CY (ft^2 & yards^3)??
-
Hi,camilozunga.
I will test the problem on mac.
Please wait.
Hi,QS3D.
I made this plugin be using simply.
So there are only "meter" or "inch".I will add selecting quantities units.(maybe units in Sketchup).
Please wait.
Thanks.
-
Looking forward to it. Thanks!
-
@tak2hata said:
Hi,camilozunga.
I will test the problem on mac.
Please wait.Hi,QS3D.
I made this plugin be using simply.
So there are only "meter" or "inch".I will add selecting quantities units.(maybe units in Sketchup).
Please wait.
Thanks.
Thanks a lot for your answer, I'll be waiting.
-
Hi,All.
I update to version2.2.
Add Menu ,"Change Units" for reports.
You can select every units of length , area , volume, cost.Hi,camilozunga.
I tested solid quantify on mac.
I could not found problem you sayed.
Green line in this picture is Y-Axis.
The entity was placedalong Y-Axis.
Webdialog is fine.Please upload here skp file had problem and Screen capture of Webdialog.
Or send it to me by message.Thanks.
-
tak2hata
Great plugin. I have two questions, the COUNT(pc) what does this field indicate. And the cost, how do you get the cost field to reflect cost.
As for the COUNT(pc) I have made duplicate's of solid, and the COUNT(pc) stays at 1, however it show each duplicate on a separate line.
As for the COST, I have enter cost when I change the unit, as an example, 1.00 for each sq/in and the COST does not change.
So I must be making a mistake just can't seem to track it down.
Thanks you help and plugins.
Ken
Advertisement