[Plugin] Hatchfaces (v1.8 beta) UPDATED 15-Dec-2012

sergey2402

Well done! You are doing greatly desired work!
I really, really like it.

jolran

Why thank you But I really think you should thank TIG and Kyuu.

Feel free to ask for ways to improve! Or even come up with ideas

ken

Well, this is starting to look good. My suggested improvement

If you do two hatches of the same face, is it possible to get both hatches in the same group.

Thank you for your work

Ken

sergey2402

Maybe hatches should be on its own layer?

jolran

Thank you for your input guys!! Good points!

I will answer more profound tomorrow. I'm a bit in a hurry! For Now, here is a minitut or tips, as a compensation that the hole "issue" isent fixed yet.

sergey2402

TIG, kyyu, please do not leave jolran alone. You are all together make a very necessary work.

TIG

We are helping him... [sometimes in the background ]

sergey2402

@tig said:

We are helping him... [sometimes in the background ]

jolran

About added features:

To put hatches in a layers(newly created OR selected) is possible, at least create a new layer. I was thinking of adding that anyway.

@unknownuser said:

If you do two hatches of the same face, is it possible to get both hatches in the same group.

It is a good idea, looking at how the plugin works right now. But it's risky business adding geometry inside groups, and you probably have to select the created hatchgroup before running. Wich in turn will not add that much improvement in workflow?
But if you really, REALLY want that feature... It won't hurt testing..

My personal view is that I should rather investigate the possibilitie to improve the plugin with a "pattern library" instead. No promises can be made in that regard though. It seams difficult.

@unknownuser said:

TIG, kyyu, please do not leave jolran alone

TIG's been helping me a LOT! Through PM's and more, otherwise this plugin would not exist. KYuu fixed the spacing and that was mucho importante.

TIG

The layer part is easy. Add some code to make/refer to the layer
hatch_layer=model.layers.add("HATCH")
If it doesn't exist it's made...
Then after the group is made use...
group.layer=hatch_layer
Done

You could add a 'crosshatch' option to the main dialog, because most of the time that's what's wanted anyway - "Crosshatch? " >> "Yes|No" [you'd need to insert a 3rd ['','',["Yes|No"]] in inputbox moving the title over to 4th place] - default would be 'No'. If results[3]=='Yes' you'd repeat the line drawing steps within the same group entities, but at +/-90 degrees, so there would be twice as many edges overlaid etc...

How are the 'holes' going...

jolran

He he! As easy as that, huh? Well there you have it guys!

I will work on those things. And put an option of angle on second hatching. That would give you as much flexibility as
needed for linehatching I presume?

The "holes"... Hmm difficult. I have been searching posts about that subject(Don't just want to add anything unless I actually understand what is going on). If I understood it right, holes are somewhat problematic in Sketchup. One have to
use both face.outer_loops AND face_loops to get to the face hole geometry? Where face_loops is innerloop? Or include.all loops? That is a big difference.

In API it says: Face outer_loops retrieves a "face loop object" But what does that mean?
Edges, vertices? Both? Is it an array?

For a newbie like me to interprate the API is quite difficult.
The posts in here are very helpful, but it takes time to search specific posts. There are currently around 146 pages * 25 * (number replies) in just the developper section.

So with that said, I am very greatful for your help TIG.

TIG

all_loops=face.loops i.e. its is an array of all loops including the outer one
outer_loop = face.outer_loop inner_loops = all_loops - [outer_loop]
Although some of this is of academic interest as we only need all_loops...

As I said before [in a PM]... you simply iterate through all loops and add a face for each loop using its vertices.
all_loops.each{|loop|gents.add_face(loop.vertices)}
You have the main face drawn... but with its holes filled in with other faces.
We can erase these by testing to see if each face in gents has an edge with only one face [i.e. it's NOT in a hole], if not then we'll erase it...

faces2go=[]
gents.each{|face|
  next if face.class!=Sketchup;;Face
  face.edges.each{|e|
    if not e.faces[1]
      break
    end
    faces2go << face
  }
}
gents.erase_entities(faces2go)

[this code is untested and might have typos !]
Now you should have a perfect clone of the face inside the group with any holes reproduced too.
Do your intersecting of the hatch lines etc just as before and then when you erase 'faceless edges' the ones now crossing these 'holes' will be erased too

jolran

Great info! Will work on that.

Do you mean {|loop|gents.add_face

or {|loop|ents.add_face ?

Thank you TIG. Got me some homework

TIG

The 'gents' refers to the group.entities where we are replicating the face ?

jolran

Yes that make sence. I had already put a similar code from your pm in my editor where I had used ents.

That was wrong then from my part. Makes thing clearer. Thanks!

jolran

Strange. Should work, but no innerface is created.
Hatch gets created over whole face. I tried different combinations with
these new lines added, but get errors then..

gp=ents.add_group()
      gp.name=name
      gents=gp.entities
      face=gents.add_face(face.outer_loop.vertices) # adds a faceclone from outer vertices loop
      faces2go=[]  # was faces2gp? Typo? array for innerloups faces
      face.loops.each{|loop|gents.add_face(loop.vertices)}   # creates inner loop 
      gents.each{|face|
      next if face.class!=Sketchup;;Face     
      face.edges.each{|e|
      if not e.faces[1]
      break
      end
    faces2go << face
  }
}
      gents.erase_entities(faces2go)                #erase the faces in the holes

TIG

Try first adding the faces for the 'inner_loops' - each using loop.vertices in turn [i.e. face.loops-[face.outer_loop]], then add the face from face.outer_loop.vertices...
This might work... To see what you are getting stop the code temporarily before the inner faces are erased and before any hatching is done - add a line 'return nil' in the code so that it stops... You should get the faces reproduced in the group. Then try with the inner face erase bit to see if they go [sans hatching...]

sergey2402

Perhaps the thickness of the hatch lines should not be equal to the thickness of the edges? Like dimension lines.

jolran

Not noow Kato!!

I don't understand Sergey. Do you want line weight? That is only possible
through styles in Sketchup. But it's a global feature. I am afraid I can't do anything about that. Maybe if thin rectangles are grouped with materials
like TIG,s dashed lines. But that is further on in developement.

Look at my last minitut for an example how you can use differnt styles, with edge profiles for ex.

Thanks for input Sergey! MUST CODE ON!!

And yes TIG. I'm trying!

jolran

This code gives me a face with holes. If I stop after this code.
But cannot Hatch faces with holes in full script.
Get an error
Normal (square faces) works fine in full script with the changed code, strange enough.

gp.layer=hatch_layer    # group to Hatching layer
      gp.name=name
      gents=gp.entities
      faces2go=[]
      face.loops.each{|loop|gents.add_face(loop.vertices)}
      
      gents.each{|face| 
      next if face.class!=Sketchup;;Face     
      face.edges.each{|e|
      if not e.faces[1]
      break
      end
      faces2go << face
  }
}
 
 gents.erase_entities(faces2go)                #erase the faces in the holes