[Plugin] Sketchup Ivy

charly2008

Dear members,

I need an idea from you. How can I eliminate this material Wisteria? I've searched the entire hard disk, but these "Wisteria.png" is nowhere to be found. But these png must be stored somewhere. I feel like a beginner.

Charly

charly2008

Problem solved. The png was saved in my template.

charly2008

I give it up now. Now the plugin is working again. But now some leaves are again transparent and others not. I probably do not understand the workings of this plugin. I'll wait for an update.

Charly

rombout

@charly2008 said:

I give it up now. Now the plugin is working again. But now some leaves are again transparent and others not. I probably do not understand the workings of this plugin. I'll wait for an update.

Charly

THat's due to the prob that 2 images arent transparent png's open these to in a image editor and make them transparent and than re-import them into SU

charly2008

Hi Rombout,

@unknownuser said:

THat's due to the prob that 2 images arent transparent png's open these to in a image editor and make them transparent and than re-import them into SU

Thanks for your answer. I have converted the jpg to png. I do not know if I've done anything wrong. I have attached the pngs below. If you watch it once I would be grateful.

Charly

TIG

You seem to be going round in circles.

This zip containing the three adjusted SKPs [and PNGs] that have hidden edges and already use proper transparent PNG files...
Replace those in the Textures folder...
Retry...IvyTexturesSKPs.zip

charly2008

TIG,

I do not know how I can thank you. Sometimes you appear to me like the Robin Hood of the forum.

Charly

RomB

you need to make reset button. i have made a lot of changes in numbers...and now my ivy don't grow on a wall, it grows in every direction...please can someone share default settings?

thomthom

@romb said:

you need to

Did you mean, "it would be nice with" or "Could you please"?

Just saying, the wording can make a difference. Making freeware stuff and you end up with lots of demands from your users, it can get a bit tiresome. (Spoken by someone who makes lots of freeware.)

TIG

hsh = {
            ;branch   => {
                ;nodesize    => 3,
                ;pattern     => 0.8,
                ;probability => 0.97,
                ;radius      => 0.8,
                ;floatlength => 150,
                ;detail      => 4,
                ;spread      => 0

            },
            ;leaf     => {
                ;pattern     => 1,
                ;probability => 0.7,
                ;size        => 5
            },
            ;gravity  => {
                ;weight => 1,
                ;vector => [0, 0, -1]
            },
            ;wind     => {
                ;weight => 0.1
            },
            ;random   => {
                ;weight => 0.3
            },
            ;adhesion =>{
                ;max_adhesion_distance => 50,
                ;weight                => 0.2
            },
            ;legacy   => {
                ;weight => 0.8
            }

}

The default settings as extracted from the code.
Now you do some work resetting your values manually...

thomthom

No worries.

RomB

sorry for my english at first. not my native - in russian i mean that this option will be very usefull. and of course thanks for that plugin. sorry if i offend somehow someone of developers. sorry please
ps. in russian it's a little bit more words need to be said of simple -you need to make-

RomB

still not on the wall ((( picture above. where's my mistake?

TIG

@romb said:

still not on the wall ((( picture above. where's my mistake?

I don't even have this tool installed !
The default adhesion seems to be 50 in the code I posted...
Why is yours 0.2 [20?] ??
Presumably the higher the adhesion value the more it sticks to the wall ???

RomB

@tig said:

@romb said:

still not on the wall ((( picture above. where's my mistake?

The default adhesion seems to be 50 in the code I posted...
Why is yours 0.2 [20?] ??
Presumably the higher the adhesion value the more it sticks to the wall ???

that's it ) maybe i know english - but no so good till that time. and 0.5 become working not from next ivy, from third. But problem is solved - thx. better to rename adhesion to -sticking- fo rus users

RomB

it won't work properly again, with -adhesion- 0.5 it's still grow in every direction. what's wrong with me? please help me to understand.
ps. it's skp file in archive, my model in wich ivy goes crazy. maybe problem it it?

Land_Mass_2_test_2.rar

zick

wow

iichiversii

Wow Ivy Generator is great, but im having a problem importing the file back into SU, i can export my model from SU into Ivy Gen but when i import it to SU it freezes SU and never recovers, im using free version of SU and using obj importer, any suggestions would be great

farmerjoe50

I dropped file into plugins folder but it is not showing up in sketchup...I noticed the file is .rar, not a rb file. What is the secret?

TIG

@farmerjoe50 said:

I dropped file into plugins folder but it is not showing up in sketchup...I noticed the file is .rar, not a rb file. What is the secret?

Doh!
A .rar file is a compressed file - like a .zip file - just made by another application.
So, like with a zip file you must extract its contents - i.e. the .rb file and intact subfolder[s] of miscellaneous files that then go into the Plugins folder.
There's a sticky-post in the Plugins Forum about installing tools from zip files - read that - substituting 'rar' when it says 'zip'...