[Plugin][$] RoundCorner - v3.4a - 31 Mar 24

DDoc

Hey guys, when installing the plugin I get this error.

Any help?

fredo6

Hey guys, when installing the plugin I get this error.

Just follow the message instructions.
Press YES in the dialog box and erase the signature file. Then restart Sketchup and do the validation again.

DDoc

Hey, I tried that, but now the plugin does not load at all. I tried removing it, and deleting the folder manually. But when I install and run it, nothing happens.

jgcrombie

Would I be able to purchase just roundcorner (for now) without the bundle & once I have the funds to purchase the 8 plugin bundle (for $40) can I upgrade & pay the "difference". Thanks in advance!

snacktaube

Hello!

I just bought and downloaded RoundCorner but am having some issues: every time I have the plugin open and click away to orbit or pan the viewpoint the plugin closes and I have to manually reopen it! Very annoying and would love to figure out how to keep it open for when I'm selecting edges / faces...

Please help!!!

Sketchup Version 22.0.353, on a Mac

fredo6

@snacktaube said:

Hello!

I just bought and downloaded RoundCorner but am having some issues: every time I have the plugin open and click away to orbit or pan the viewpoint the plugin closes and I have to manually reopen it!

Before launching RoundCorner, could you open the Ruby Console and leave it open, so that you can check potential error messages.

snacktaube

@fredo6 said:

@snacktaube said:

Hello!

I just bought and downloaded RoundCorner but am having some issues: every time I have the plugin open and click away to orbit or pan the viewpoint the plugin closes and I have to manually reopen it!

Before launching RoundCorner, could you open the Ruby Console and leave it open, so that you can check potential error messages.

I did, but I see no error messages . What else can I do to troubleshoot?

fredo6

It looks like you Click with the Left button, which is an exit (unless you have edges selected).

Normally, the Middle button used for Orbit and Pan should not affect RoundCorner.

Do you use a special mouse?

SimonVdd

hello, last year I bought a license of this plugin (RoundCorner).
Now I have switched to sketchup 2023 and when reinstalling this plugin I cannot find my license file.
Can I contact someone to request my license again?

Rich O Brien

@simonvdd said:

Can I contact someone to request my license again?

No need to request, your license files are at https://sketchucation.com/webshop/my-licences.php

khanhafeez

@rich o brien said:

@abdullahc said:

I'm Living in turkey and my trial licence is over. I want to obtain licence but the only payment methot with paypal and the problem is starting here because Paypal is blocked in turkey we can't buy anything with paypal. What I'm gonna do now, please need a help.

We are aware our Turkish friends are unable to purchase but there's nothing we can do until we have more payment gateways. But different gateways would create different pricing. Which is a headache also.

use VPN for payment transaction so it easy to pay through paypal

pepesanmo

He comprado una licencia para este plugins y no se instalarla, si alguien me puede ayudar, gracias

TIG

@unknownuser said:

I bought a license for this plugin and I can't install it, if someone can help me, thanks

You save the license file to somewhere logical on your computer.
Then you open the submenu License... item in the Tools > Fredo6Collection > RoundCorner submenu.
In its dialog there's an 'activate' button, use that and navigate to the saved license file.
It should then be permanently activate the license for that extension on your computer...

Guarde el archivo de licencia en algún lugar lógico de su computadora.
A continuación, abra el elemento del submenú Licencia... en el submenú Herramientas > Fredo6Collection > RoundCorner.
En su cuadro de diálogo hay un botón 'activar', utilícelo y navegue hasta el archivo de licencia guardado.
Entonces debería activarse permanentemente la licencia para esa extensión en su computadora...

mervali

Hello; I am writing you from turkey. 3 days ago, I had a friend from Spain buy this plugin for me. because there is no pay pal in turkey. but still no mail. The payment was taken but the mail did not come. Could you help?

fredo6

@mervali said:

Hello; I am writing you from turkey. 3 days ago, I had a friend from Spain buy this plugin for me. because there is no pay pal in turkey. but still no mail. The payment was taken but the mail did not come. Could you help?

You can check and download the license files at the MyLicenses page on Sketchucation.

For the sign in you need to use the credentials that were used for the purchase of the license, however.

fjsgruppe

Hi,
problems with the licenses of Fredo6:

All Licensesfiles are gone and I do not understand why.
I found this on sketchucation:

Fredo6 Plugins Information on 2023-03-11 14:47:47 +0100

Platform: x64-mswin64_140 - Ruby: 2.7.2
Sketchup: 21.1.332
LibFredo6: v13.8a
Sketchucation ExtensionStore: 4.3.0
SCFLicense: v6.0e - 72
Fredo6 Plugins

Animator v3.8a
Curviloft v1.9a - licensed FULL
Curvizard v2.4b
FredoScale v3.5a
FredoSketch v1.2a
FredoTools v4.3a
JointPushPull v4.6a
MoveAlignMe v1.2a
MrHide v1.6a
RoundCorner v3.3a
Souvenir v2.1a
TopoShaper v2.6a
VisuHole v1.4b
SCFLicense directory present

Signature File: 2022-05-14 16:28:40 +0200
Curviloft: 2023-03-11 12:07:01 +0100
PieBeta: 2022-05-15 12:45:17 +0200

I just downloaded the missing Licenses once again and put them in my empty folder:
C:\Users\fjSchüssler\AppData\Local\SCF

Name Änderungsdatum Typ Größe
Psets 15.05.2022 13:43 Dateiordner
Temporary 11.03.2023 12:07 Dateiordner
H cookie 24.11.2022 11:23 DAT-Datei 1 KB
device 01.05.2022 11:45 DAT-Datei 1 KB

j events 09.03.2023 11:09 DAT-Datei 14 KB
D SCF_Purchased_License_Curviloft_NORMA... 11.03.2023 12:00 SCFLICENSE-Datei 1 KB
Q SCF_Purchased_License_Curvizard_NORM... 11.03.2023 12:00 SCFLICENSE-Datei 1 KB
D SCF_Purchased_License_FredoScale_NOR... 11.03.2023 12:00 SCFLICENSE-Datei 1 KB
D SCF_Purchased_License_JointPushPull_NO... 11.03.2023 12:00 SCFLICENSE-Datei 1 KB
D SCF_Purchased_License_PieBeta_FREE_20... 11.03.2023 11:59 SCFLICENSE-Datei 1 KB
Q SCF_Purchased_License_RoundCorner_NO... 11.03.2023 12:00 SCFLICENSE-Datei 1 KB
Q SCF_Purchased_License_ToolsOnSurface_... 11.03.2023 12:00 SCFLICENSE-Datei 1 KB
Q SCF_Purchased_License_TopoShaper_NO... 11.03.2023 12:00 SCFLICENSE-Datei 1 KB
D SCF_Purchased_License_VisuHole_NORM... 11.03.2023 12:00 SCFLICENSE-Datei 1 KB
(Look at Date and time)

After downloading the missing licenses, I put them into the folder above.
Then I renewed the 'Curviloft' License in Sketchup but lost one 'Curviloft'-seat.
Renewing the other Licenses will surely end up the same way.

I suppose, that shoud not happen.
In Sketchucation you may see my bought plugins (Fredo bundel..)

By the way: "I love your Plugins Fredo!!!!!"

What can be done?
What happened?

fredo6

@fjsgruppe said:

Hi,
problems with the licenses of Fredo6:

All Licensesfiles are gone and I do not understand why.
What happened?

Did you change or reformat your computer (or hardware changes)?

Do not copy license files. Instead, validate the licenses from the dialog box with the purchased license files that were sent to you after purchase.

Also, it would be safer to upgrade to LibFredo6 v13.9a.

TIG

One other thought...
You Windows user-name is fjSchüssler
Which contains an umlaut.
This naming is against the Windows recommendations which say you should use A-Za-z0-9 and a few simple punctuation characters.
Perhaps this is interfering with reading of certain files...
If you rename your use say fjSchussler or fjSceussler does it help ??

fjsgruppe

Thank's for the advice!
I'll try it out nect weak,as soon, as possible.
fjs

fjsgruppe

Hi,
I just found my old scf-license-files, and could now do the licensing process once again,
if I hadn’t made a blunder:

I usually put a copy of my invoices in to my note programme.
That time, I put the license-files in there. You should never do that!!!
I looked for my files in downloads- and SU-folders, but the files seemed to have vanished.

Today I realised, that my note programme: ‘AllMyNotes’ stored them in its ddb-file.
SU can not extract data from there and I can not convert them either.

I can read the data with an editor, but I can’t do anything with it.
Greetings from Germany!