Let's have a Hardware speed test for SU

Jean Lemire

Hi folks.

I did some test with this file. I first ran the test with shadows off. Then I turned shadows on and got a faster time I turned shadows off again and I got an even faster time Go figure.

Here are the results:

On my 2 years old Dell Precision Workstation with a 2.667 GHz processor and 12 Gigs of RAM with a NVIDIA Quadro FX 3800 with 1 Gb of VRAM, I get 63 f/s (frames per second) with shadows off and 53 f/s with shadows on. This is the machine I use at work.

With my one month old Mac Book Pro with i7 processor at 2.2 GHz and 8 Gigs RAM with a AMD Radeon HD 6750 with 1 Gb of VRAM, I get 58.4 f/s with shadows off and 47.5 f/s with shadows on using SU 8 on Mac OS X (Snow Leopard) and 61.9 f/s with shadows off and 54.1 f/s with shadows on using SU 8 with Windows 7 on Bootcamp.

Just ideas.

brodie

Jean, i had a very similar experience (see my post about 5 posts up.

Brodie

mp1963

After reading other posts I thought I would turn shadows on first and run the speed test...

Screen Shot 2012-01-09 at 13.19.10.png

Then I turned shadows off..

Screen Shot 2012-01-09 at 13.15.45.png

Late 2009 iMac - 2.93Ghz Core 2 Duo, 8Gb 1067Mhz DDR RAM, Nvidia GT130 video card.

daiku

I find this frame rate is very dependent on the window size. I just got a 30" display with 2560x1600 resolution. With the window maximized, I get 16 fps. If I shrink it to about half, I get 20 fps. I ran it several times on each setting to get an average.

Core2 Duo E8400 3Ghz
GeForce 9500 GT (x2)

But here's what's really puzzling me:

One of the GPUs (sitting in a PCIE x16 slot)is driving the big monitor. The other (sitting in a PCIE x4 slot) is driving two 1050x1680 displays. If I size the sketchup window to span over and fill both the small displays, I get over 20 fps. If I then drag that same window onto the big display, I see much lower rates, around 15 fps. Anyone have an idea what's happening? I'm disappointed with the frame rate compared to what I had on the smaller monitors.

Also, we should run the test full screen, and report our screen resolution, so we are comparing apples to apples.

bmike

Results are all over the place for me. 17" MacBook Pro.
21(ish) frames per second on running from opening.

54 after I turn shadows on!

I suspect it may have to do with the dual graphics card switching over.
Ran at full screen and in a small window as well.

Screen Shot 2012-03-22 at 11.07.21 AM.png

daiku

Not sure why, but If I move the big display to the secondary port on the secondary card, it runs really well. Over 45 fps, at 2560x1600. That's the x4 slot, shared with another monitor. Go figure.

bmike

@daiku said:

Not sure why, but If I move the big display to the secondary port on the secondary card, it runs really well. Over 45 fps, at 2560x1600. That's the x4 slot, shared with another monitor. Go figure.

I don't think this test is the most accurate...

daiku

I agree, Mike. But I don't know of any other way to test SU performance. And I have to say that the configuration that gives me the best benchmark numbers is definitely faster in everyday use. Especially orbiting and zooming with the space navigator.

bmike

Can you fix the widow size with a ruby script? Might be an advantage to force this to open in 1200x800 or 800x600 and do its thing. Then there might be some baselines that start to make sense.

Otherwise, I have no idea why mine jumps up to 50+ with shadows on full screen, but plods along at 20something when I do a reboot and only open SketchUp and that file.

Odd.

EscapeArtist

This is interesting:

Load the model by double clicking the .skp file - 72 frames/2.698 sec

Turn shadows on - 72 frames/12.237 sec

Turn shadows back off - 72 frames/1.168 sec (?!)

Try again with shadows on - 72 frames/1.168 sec.

Now that's just strange.

EarthMover

Results on my newer laptop. Video card is Nvidia GTX 560m 3GB GPU. Higher score with shadows on for some reason. SU 8 most recent update.

brodie

This test used to work quite well as a comparison but was completely broken after an update some time ago. It's no longer good for any sort of comparison.

-Brodie

setniew

So I'am getting results as follow:

no shadows
time test

shadows on
ttest shadows

I'am wondering... I'am getting low performance when "having fun" with big models like this one:

Error 404 (Not Found)!!1

(sketchup.google.com)

Is there a way to orbit this model smoothly?

oh and this is my hardware:

sketchymick

GPU is reference GTX680

Made negligible difference whether shadows were on or off, or whether window was full screen (1920x1080) or partial. Range was 60.1 (first run, full screen no shadows) to 64.5 (middle run, shadows off, full screen).

Cheers

Mick

function

Any way someone can post an updated file or ruby for benchmarking SKP8? I'm building a new rig and want to benchmark my applications. I have a quadro 5000 and will be picking up a keplar 6xx series to compare photoshop, 3ds max, and skp. I know SKP isn't gpu based and works 1 core on the geometry, but I'm interested in comparing the hardware anyhow.

thomthom

@function said:

Any way someone can post an updated file or ruby for benchmarking SKP8? I'm building a new rig and want to benchmark my applications. I have a quadro 5000 and will be picking up a keplar 6xx series to compare photoshop, 3ds max, and skp. I know SKP isn't gpu based and works 1 core on the geometry, but I'm interested in comparing the hardware anyhow.

All you do is just type Test.time_display into the Ruby Console - it is not specific to SketchUp version.

micione

Intel Core i7-2600 GPU
Nvidia quadro 4000

garyhr

not bad for a single video card

intel i7 3770k
radeon hd 6870

miggy

no shadows

with shadows

Intel i7 @2.2GHz, 6GB RAM, GeForce 550M w/ 1GB onboard + 2GB shared
I really can't understand why I get this fantastic fps when others out-spec my Dell XPS laptop quite considerably.
No shadows: 63.1 fps !!!
w/ shadows: 62.9 fps...?

I didn't have any other applications open (other than FF), just an empty, standard environment.
I noticed a massive slow-down when I then opened up some other apps - Word + Excel + Photoshop - down to 25 fps...
looks like maybe SU couldn't re-allocate some shared memory that was taken away?

I then made a component of the existing cube & then made a 4x4x4 version, so 64 times the existing. (btw, disk space only doubled)
There I got about 9fps.
I then moved the whole 64x block up the blue axis so as to hide the top half of the model out of the FOV.
I then got 18fps...
Looks like SU only calculates the rendering of the visible FOV, which is great...
But, every manipulation in the sketchup window was molasses-slow - menu display, pasting into the ruby console, etc.

Then I rebooted, and try as I might, after some 50 times, I consistently only got around 31 fps on the standard cube...???
I have no complaints about my speed, but I can't understand where that turbo effect came from when I first tried it...

food for thought...?

nabee

I have c2q 8200 @ 3.0 ghz and I always wanted to upgrade cpu/mobo when SU was chuggin.

But seeing the results here, because of SU's architecture, maybe I won't get much gain with upgraded Cpu.

I get 60fps for this test.

I mean, I am getting same results with a person with i5 2500k @ 4.8ghz!. (i plan to get 3750k)

true?