[Plugin][$] FredoScale - v3.6a - 01 Apr 24

tomb85

Hi,

First, thanks for this plugin, it's great. Most of the time i need the stretch tool, i'm trying to implement this in my worflow for stretching cabinets, windows, doors, ... but i keep getting the same bugsplat while using it.
even with very simple geometry.

I make a cube and group it (let's call it cube1). A make a copy of it (cube2) so i have the exact same cubes next to each other. I select both cube1 and cube2 and putting into a new group (cubegroup.
so now i have a my newly made group (cubegroup) with 2 nested groups inside (cube1 and cube2). I can use the stretch-tool on this without any problem. After stretching I duplicate my cubegroup. In my entity info window i see that there are 2 of these groups in my model. when i try to stretch my 2nd cubegroup, i get a bugsplat. see my video:
http://www.youtube.com/watch?v=uxhelxITBO4

Now when i do exactly the same, but instead of trying to stretch my second cubegroup after duplicating it. I first edit my group by entering it, and leaving it. Now my Entity info window says there is just 1 of group of this in my model instead of 2. take a look at my second video where i don't get the bugsplat:
http://www.youtube.com/watch?v=0xGhham4AxM

any explanation?

thanks

dedmin

Just tried, but no BugSplat for me! Maybe some messing plugins?

mac1

Su 7.1+ plus here and see the following:

Bug splat for the stretch of the 2 cubed group and can get a bug splat for stretch of just one of them. No bug splat for stretch of one stand alone, before making copy.
Outliner shows the two groups. Report back to 1 by entering edit mode and leaving confirmed
3)Instead of making groups the cube1 and cube2 were made in nested component then no bug splat. Checking placement of stretching plane shows the tool will change the definition, say of cube2 if plane is thu it and not cube2 in other instance of cubed into differnt instances.
Ckecking version , may have 2.0

fredo6

These bugsplats may be related to the fact that when you copy a group, it behaves as a component until it is edited or modified. Normally FredoScale makes them unique, but there may be problem for these type of copy-cat groups.
Also, having the outliner open is usually not recommended, especially with version 6 and 7.

fredo

mac1

Thanks fredo
I heed the previous warnings and roll it up before doing any thing.
It appears I am at 2.0i so will update and look for diff
Update: 2.1a gives same result

tulacong

@unknownuser said:

With FredoScale 2.1 you can orientate the selection box around a set of objects and interactively apply a number of geometric transformations, such as Scaling, Tapering, Stretching, Plane Shear, Twisting, Bending and Rotation. By extension, some transformation can be done without a selection box.
[attachment=4:3vnwzr1a]FredoScale%202.jpg[/attachment:3vnwzr1a]

[attachment=2:3vnwzr1a]FredoScale User Manual - English - v2.0 - 28 Mar 09.pdf[/attachment:3vnwzr1a]
[attachment=3:3vnwzr1a]FredoScale User Manual - French - v2.0 - 28 Mar 09.pdf[/attachment:3vnwzr1a]

Language: English, French, Spanish, German, Italian, Japanese, Korean, Chinese, German (thanks to all kind translators)

Menus: by default, it is installed in Tools > Fredo6 Collection > FredoScale

Icon toolbar: by Default ‘FredoScale’. many icons are available, but you can configure which ones to display (menu Default Parameters…)

The plugin is free, for private and commercial usage. There is a donation menu however.

Download and Open the archive

Select All (Ctrl A)

Extract into the Sketchup Plugin Directory

Answer YES to overwrite all existing files if any

The footprint in the SU Plugin Directory must be:
[attachment=1:3vnwzr1a]Fredoscale 2.1 footprint.jpg[/attachment:3vnwzr1a]
On Mac the SU plugin directory should be:
Macintosh HD/Library/Application Support/Google SketchUp 8/SketchUp/plugins

CAUTION: NEVER rename or move files from their folders. If you are unsure of your unzip operation, do it in a neutral folder and check that you reconstruct the right footprint. Then transfer the folders and files to the SU Plugin Directory.

DOWNLOAD FredoScale 2.1a – 12 Jan 11
[attachment=0:3vnwzr1a]FredoScale 2.1a.zip[/attachment:3vnwzr1a]
IMPORTANT: Requires to download LibFredo6 3.6 or higher if not already installed.

[flash=425,344:3vnwzr1a]http://www.youtube.com/v/WN-nV5VsoRY&hl[/flash:3vnwzr1a]
[flash=425,344:3vnwzr1a]http://www.youtube.com/v/bPbb8PPGtVg&hl[/flash:3vnwzr1a]

Pour les utilisateurs francais voir aussi l’excellente video de Laurent Brixius
http://www.arch-image.com/wordpress/2010/04/06/plugin-sketchup-fredoscale/

Select one or several objects (faces, edges, groups or components)

Click on the icon of one tool, for instance Scaling

You can orientate the selection box:

Arrow Upwill align on model axes

Arrow Leftand Arrow Rightwill cycle through axes of components at highest level

Arrow Downwill restore the initial alignment when selecting

Gently click and drag on the handles to perform the deformation. Toggle the CTRL key to perform the deformation from the center.

You can type relevant values in the VCB or via a dialog box (TAB key)

For Twist and Bend, F4 toggles a Slicer on and off

For Stretch, F4 toggles a Divider on and off

It is a good idea to check the contextual menu to see available options

FredoScale 2.1a - 12 Jan 11: Technical update along with LibFredo6, with two-phase loading. No functional change, but it is advised to upgrade for support.

FredoScale 2.0i - 08 Apr 10: Same as 2.0h, but includes the Chinese translation.

FredoScale 2.0h - 26 Nov 09: Stable version

verygood thanks

fredo6

@mac1 said:

Thanks fredo
I heed the previous warnings and roll it up before doing any thing.
It appears I am at 2.0i so will update and look for diff
Update: 2.1a gives same result

I can reproduce the bugsplat.
This seems definitely related to the question of Groups behaving as components when copied and not edited yet.
I think I can do something about.

Just in case, FredoScale includes a commande MakeUnique (icone as a 1) which applies a make unique to groups and components recursively.

Fredo

ivreich

Hi Fredo

Thanks for this great set of tools.

One suggestion- would it be possible to add a "uniform deformation" checkbox to the box dimension dialog box so that you can scale uniformly to a specific dimension? I can't seem to get uniform deformation when using "scale to targets" or while using the dimension dialog box, even when toggling the shift key.

Cheers

joel

rock1

great plugin fredo!. I'm really amazed by this plugin !! I found fredoscale very useful.

dedmin

fredo6

@dedmin said:

Do you have the model.
The bugsplat in mirroring seems to be related to the question of unique component (again).

Thanks

Fredo

dedmin

BC1D1S1D.skp

karros

Found this thread (and forum) by chance while looking for some answers on google. Plugin works great, thank you!!!

Designmark

Thanks Fredo,

Downloaded FredoScale today, it's fantastic!!
I really appreciate this plugin.

Kind regards,

Mark.(Newby)

merlin7777777

I'm getting this error when i start SU (v 8):

Error Loading File bootstrap_FredoScale.rb
(eval):1: uninitialized constant FredoScale::T6Error Loading File ZLoader__FredoScale.rb
no such file to load -- LibFredo6.rbError Loading File __loader.rb
uninitialized constant Traductor::Plugin

I'm fairly certain the directory structure is as you specify. I extracted the files from the subfolders into their own folders as specified but I also extracted those files to the plugin directory just in case.

any thoughts?

Jim

Did you install LibFredo6, as the instructions say? It's required to run most of Fredo's plugins.

merlin7777777

ah - no. can't see that info in the OP. can you direct me where to go for it?

Dave R

gilles

I am trying to bend a profile with precision, let say a 4000mm radius bend at 90°.
the only way I found to do this is to first calculate the length of the arc: PI2000, then use the bend tool and type 6283,20 (PI2000) and bend 90°.
Could it be possible to just type the desired radius in VCB ?

merlin7777777

OK - added the fredo6, all works ok except still egtting this error on startup:

Error Loading File bootstrap_FredoScale.rb
(eval):1: uninitialized constant FredoScale::T6

Maybe something to do with the double extraction I did?